Advanced Networking
How to configure advanced networking options on Talos Linux.
Static Addressing
Static addressing is comprised of specifying addresses, routes ( remember to add your default gateway ), and interface.
Most likely you’ll also want to define the nameservers so you have properly functioning DNS.
machine:
network:
hostname: talos
nameservers:
- 10.0.0.1
interfaces:
- interface: eth0
addresses:
- 10.0.0.201/8
mtu: 8765
routes:
- network: 0.0.0.0/0
gateway: 10.0.0.1
- interface: eth1
ignore: true
time:
servers:
- time.cloudflare.com
Additional Addresses for an Interface
In some environments you may need to set additional addresses on an interface. In the following example, we set two additional addresses on the loopback interface.
machine:
network:
interfaces:
- interface: lo
addresses:
- 192.168.0.21/24
- 10.2.2.2/24
Bonding
The following example shows how to create a bonded interface.
machine:
network:
interfaces:
- interface: bond0
dhcp: true
bond:
mode: 802.3ad
lacpRate: fast
xmitHashPolicy: layer3+4
miimon: 100
updelay: 200
downdelay: 200
interfaces:
- eth0
- eth1
Setting Up a Bridge
The following example shows how to set up a bridge between two interfaces with an assigned static address.
machine:
network:
interfaces:
- interface: br0
addresses:
- 192.168.0.42/24
bridge:
stp:
enabled: true
interfaces:
- eth0
- eth1
VLANs
To setup vlans on a specific device use an array of VLANs to add. The master device may be configured without addressing by setting dhcp to false.
machine:
network:
interfaces:
- interface: eth0
dhcp: false
vlans:
- vlanId: 100
addresses:
- "192.168.2.10/28"
routes:
- network: 0.0.0.0/0
gateway: 192.168.2.1
Last modified September 27, 2024: feat: prepare for Talos 1.9 (392c4798f)