$ helm repo add rook-release https://charts.rook.io/release
"rook-release" has been added to your repositories

$ helm install --create-namespace --namespace rook-ceph rook-ceph rook-release/rook-ceph
W0327 17:52:44.277830   54987 warnings.go:70] policy/v1beta1 PodSecurityPolicy is deprecated in v1.21+, unavailable in v1.25+
W0327 17:52:44.612243   54987 warnings.go:70] policy/v1beta1 PodSecurityPolicy is deprecated in v1.21+, unavailable in v1.25+
NAME: rook-ceph
LAST DEPLOYED: Sun Mar 27 17:52:42 2022
NAMESPACE: rook-ceph
STATUS: deployed
REVISION: 1
TEST SUITE: None
NOTES:
The Rook Operator has been installed. Check its status by running:
  kubectl --namespace rook-ceph get pods -l "app=rook-ceph-operator"

Visit https://rook.io/docs/rook/latest for instructions on how to create and configure Rook clusters

Important Notes:
- You must customize the 'CephCluster' resource in the sample manifests for your cluster.
- Each CephCluster must be deployed to its own namespace, the samples use `rook-ceph` for the namespace.
- The sample manifests assume you also installed the rook-ceph operator in the `rook-ceph` namespace.
- The helm chart includes all the RBAC required to create a CephCluster CRD in the same namespace.
- Any disk devices you add to the cluster in the 'CephCluster' must be empty (no filesystem and no partitions).

kubectl label namespace rook-ceph pod-security.kubernetes.io/enforce=privileged

$ helm install --create-namespace --namespace rook-ceph rook-ceph-cluster --set operatorNamespace=rook-ceph rook-release/rook-ceph-cluster
NAME: rook-ceph-cluster
LAST DEPLOYED: Sun Mar 27 18:12:46 2022
NAMESPACE: rook-ceph
STATUS: deployed
REVISION: 1
TEST SUITE: None
NOTES:
The Ceph Cluster has been installed. Check its status by running:
  kubectl --namespace rook-ceph get cephcluster

Visit https://rook.github.io/docs/rook/latest/ceph-cluster-crd.html for more information about the Ceph CRD.

Important Notes:
- You can only deploy a single cluster per namespace
- If you wish to delete this cluster and start fresh, you will also have to wipe the OSD disks using `sfdisk`

$ watch kubectl --namespace rook-ceph get cephcluster rook-ceph
Every 2.0s: kubectl --namespace rook-ceph get cephcluster rook-ceph

NAME        DATADIRHOSTPATH   MONCOUNT   AGE   PHASE         MESSAGE                 HEALTH   EXTERNAL
rook-ceph   /var/lib/rook     3          57s   Progressing   Configuring Ceph Mons

$ kubectl --namespace rook-ceph get cephcluster rook-ceph
NAME        DATADIRHOSTPATH   MONCOUNT   AGE   PHASE   MESSAGE                        HEALTH      EXTERNAL
rook-ceph   /var/lib/rook     3          40m   Ready   Cluster created successfully   HEALTH_OK

$ kubectl  get storageclass
NAME                   PROVISIONER                     RECLAIMPOLICY   VOLUMEBINDINGMODE   ALLOWVOLUMEEXPANSION   AGE
ceph-block (default)   rook-ceph.rbd.csi.ceph.com      Delete          Immediate           true                   77m
ceph-bucket            rook-ceph.ceph.rook.io/bucket   Delete          Immediate           false                  77m
ceph-filesystem        rook-ceph.cephfs.csi.ceph.com   Delete          Immediate           true                   77m

$ kubectl --namespace rook-ceph get cephclusters.ceph.rook.io rook-ceph
NAME        DATADIRHOSTPATH   MONCOUNT   AGE   PHASE   MESSAGE                        HEALTH      EXTERNAL
rook-ceph   /var/lib/rook     3          98m   Ready   Cluster created successfully   HEALTH_OK

$ talosctl upgrade --nodes 172.20.15.5 --image ghcr.io/talos-systems/installer:v0.14.3
NODE          ACK                        STARTED
172.20.15.5   Upgrade request received   2022-03-27 20:29:55.292432887 +0200 CEST m=+10.050399758

$ kubectl --namespace rook-ceph get cephclusters.ceph.rook.io
NAME        DATADIRHOSTPATH   MONCOUNT   AGE   PHASE         MESSAGE                   HEALTH        EXTERNAL
rook-ceph   /var/lib/rook     3          99m   Progressing   Configuring Ceph Mgr(s)   HEALTH_WARN

$ kubectl --namespace rook-ceph wait --timeout=1800s --for=jsonpath='{.status.ceph.health}=HEALTH_OK' rook-ceph
cephcluster.ceph.rook.io/rook-ceph condition met

$ kubectl --namespace rook-ceph patch cephcluster rook-ceph --type merge -p '{"spec":{"cleanupPolicy":{"confirmation":"yes-really-destroy-data"}}}'
cephcluster.ceph.rook.io/rook-ceph patched

$ kubectl delete storageclasses ceph-block ceph-bucket ceph-filesystem
storageclass.storage.k8s.io "ceph-block" deleted
storageclass.storage.k8s.io "ceph-bucket" deleted
storageclass.storage.k8s.io "ceph-filesystem" deleted

$ kubectl --namespace rook-ceph delete cephblockpools ceph-blockpool
cephblockpool.ceph.rook.io "ceph-blockpool" deleted

$ kubectl --namespace rook-ceph delete cephobjectstore ceph-objectstore
cephobjectstore.ceph.rook.io "ceph-objectstore" deleted

$ kubectl --namespace rook-ceph delete cephfilesystem ceph-filesystem
cephfilesystem.ceph.rook.io "ceph-filesystem" deleted

$ kubectl --namespace rook-ceph delete cephcluster rook-ceph
cephcluster.ceph.rook.io "rook-ceph" deleted

$ helm --namespace rook-ceph uninstall rook-ceph-cluster
release "rook-ceph-cluster" uninstalled

$ helm --namespace rook-ceph uninstall rook-ceph
W0328 12:41:14.998307  147203 warnings.go:70] policy/v1beta1 PodSecurityPolicy is deprecated in v1.21+, unavailable in v1.25+
These resources were kept due to the resource policy:
[CustomResourceDefinition] cephblockpools.ceph.rook.io
[CustomResourceDefinition] cephbucketnotifications.ceph.rook.io
[CustomResourceDefinition] cephbuckettopics.ceph.rook.io
[CustomResourceDefinition] cephclients.ceph.rook.io
[CustomResourceDefinition] cephclusters.ceph.rook.io
[CustomResourceDefinition] cephfilesystemmirrors.ceph.rook.io
[CustomResourceDefinition] cephfilesystems.ceph.rook.io
[CustomResourceDefinition] cephfilesystemsubvolumegroups.ceph.rook.io
[CustomResourceDefinition] cephnfses.ceph.rook.io
[CustomResourceDefinition] cephobjectrealms.ceph.rook.io
[CustomResourceDefinition] cephobjectstores.ceph.rook.io
[CustomResourceDefinition] cephobjectstoreusers.ceph.rook.io
[CustomResourceDefinition] cephobjectzonegroups.ceph.rook.io
[CustomResourceDefinition] cephobjectzones.ceph.rook.io
[CustomResourceDefinition] cephrbdmirrors.ceph.rook.io
[CustomResourceDefinition] objectbucketclaims.objectbucket.io
[CustomResourceDefinition] objectbuckets.objectbucket.io

release "rook-ceph" uninstalled

$ kubectl delete crds cephblockpools.ceph.rook.io cephbucketnotifications.ceph.rook.io cephbuckettopics.ceph.rook.io \
                      cephclients.ceph.rook.io cephclusters.ceph.rook.io cephfilesystemmirrors.ceph.rook.io \
                      cephfilesystems.ceph.rook.io cephfilesystemsubvolumegroups.ceph.rook.io \
                      cephnfses.ceph.rook.io cephobjectrealms.ceph.rook.io cephobjectstores.ceph.rook.io \
                      cephobjectstoreusers.ceph.rook.io cephobjectzonegroups.ceph.rook.io cephobjectzones.ceph.rook.io \
                      cephrbdmirrors.ceph.rook.io objectbucketclaims.objectbucket.io objectbuckets.objectbucket.io
customresourcedefinition.apiextensions.k8s.io "cephblockpools.ceph.rook.io" deleted
customresourcedefinition.apiextensions.k8s.io "cephbucketnotifications.ceph.rook.io" deleted
customresourcedefinition.apiextensions.k8s.io "cephbuckettopics.ceph.rook.io" deleted
customresourcedefinition.apiextensions.k8s.io "cephclients.ceph.rook.io" deleted
customresourcedefinition.apiextensions.k8s.io "cephclusters.ceph.rook.io" deleted
customresourcedefinition.apiextensions.k8s.io "cephfilesystemmirrors.ceph.rook.io" deleted
customresourcedefinition.apiextensions.k8s.io "cephfilesystems.ceph.rook.io" deleted
customresourcedefinition.apiextensions.k8s.io "cephfilesystemsubvolumegroups.ceph.rook.io" deleted
customresourcedefinition.apiextensions.k8s.io "cephnfses.ceph.rook.io" deleted
customresourcedefinition.apiextensions.k8s.io "cephobjectrealms.ceph.rook.io" deleted
customresourcedefinition.apiextensions.k8s.io "cephobjectstores.ceph.rook.io" deleted
customresourcedefinition.apiextensions.k8s.io "cephobjectstoreusers.ceph.rook.io" deleted
customresourcedefinition.apiextensions.k8s.io "cephobjectzonegroups.ceph.rook.io" deleted
customresourcedefinition.apiextensions.k8s.io "cephobjectzones.ceph.rook.io" deleted
customresourcedefinition.apiextensions.k8s.io "cephrbdmirrors.ceph.rook.io" deleted
customresourcedefinition.apiextensions.k8s.io "objectbucketclaims.objectbucket.io" deleted
customresourcedefinition.apiextensions.k8s.io "objectbuckets.objectbucket.io" deleted

$ cat <<EOF | kubectl apply -f -
apiVersion: v1
kind: Pod
metadata:
  name: disk-clean
spec:
  restartPolicy: Never
  nodeName: <storage-node-name>
  volumes:
  - name: rook-data-dir
    hostPath:
      path: <dataDirHostPath>
  containers:
  - name: disk-clean
    image: busybox
    securityContext:
      privileged: true
    volumeMounts:
    - name: rook-data-dir
      mountPath: /node/rook-data
    command: ["/bin/sh", "-c", "rm -rf /node/rook-data/*"]
EOF
pod/disk-clean created

$ kubectl wait --timeout=900s --for=jsonpath='{.status.phase}=Succeeded' pod disk-clean
pod/disk-clean condition met

$ kubectl delete pod disk-clean
pod "disk-clean" deleted

$ cat <<EOF | kubectl apply -f -
apiVersion: v1
kind: Pod
metadata:
  name: disk-wipe
spec:
  restartPolicy: Never
  nodeName: <storage-node-name>
  containers:
  - name: disk-wipe
    image: busybox
    securityContext:
      privileged: true
    command: ["/bin/sh", "-c", "dd if=/dev/zero bs=1M count=100 oflag=direct of=<device>"]
EOF
pod/disk-wipe created

$ kubectl wait --timeout=900s --for=jsonpath='{.status.phase}=Succeeded' pod disk-wipe
pod/disk-wipe condition met

$ kubectl delete pod disk-clean
pod "disk-wipe" deleted

machine:
  kubelet:
    extraArgs:
      rotate-server-certificates: true

cluster:
  extraManifests:
    - https://raw.githubusercontent.com/alex1989hu/kubelet-serving-cert-approver/main/deploy/standalone-install.yaml
    - https://github.com/kubernetes-sigs/metrics-server/releases/latest/download/components.yaml

kubectl apply -f https://raw.githubusercontent.com/alex1989hu/kubelet-serving-cert-approver/main/deploy/standalone-install.yaml
kubectl apply -f https://github.com/kubernetes-sigs/metrics-server/releases/latest/download/components.yaml

# generic-device-plugin.yaml
apiVersion: apps/v1
kind: DaemonSet
metadata:
  name: generic-device-plugin
  namespace: kube-system
  labels:
    app.kubernetes.io/name: generic-device-plugin
spec:
  selector:
    matchLabels:
      app.kubernetes.io/name: generic-device-plugin
  template:
    metadata:
      labels:
        app.kubernetes.io/name: generic-device-plugin
    spec:
      priorityClassName: system-node-critical
      tolerations:
      - operator: "Exists"
        effect: "NoExecute"
      - operator: "Exists"
        effect: "NoSchedule"
      containers:
      - image: squat/generic-device-plugin
        args:
        - --device
        - |
          name: tun
          groups:
            - count: 1000
              paths:
                - path: /dev/net/tun          
        name: generic-device-plugin
        resources:
          requests:
            cpu: 50m
            memory: 10Mi
          limits:
            cpu: 50m
            memory: 20Mi
        ports:
        - containerPort: 8080
          name: http
        securityContext:
          privileged: true
        volumeMounts:
        - name: device-plugin
          mountPath: /var/lib/kubelet/device-plugins
        - name: dev
          mountPath: /dev
      volumes:
      - name: device-plugin
        hostPath:
          path: /var/lib/kubelet/device-plugins
      - name: dev
        hostPath:
          path: /dev
  updateStrategy:
    type: RollingUpdate

kubectl apply -f generic-device-plugin.yaml

$ kubectl describe node worker-1
...
Allocated resources:
  Resource           Requests     Limits
  --------           --------     ------
  ...
  squat.ai/tun       0            0

resources:
  limits:
    squat.ai/tun: "1"

# tun-pod.yaml
apiVersion: v1
kind: Pod
metadata:
  name: tun-test
spec:
  containers:
  - image: alpine
    name: test
    command:
      - sleep
      - inf
    resources:
      limits:
        squat.ai/tun: "1"
    securityContext:
      allowPrivilegeEscalation: false
      capabilities:
        drop:
          - ALL
        add:
          - NET_ADMIN
  dnsPolicy: ClusterFirst
  restartPolicy: Always

$ ls -l /dev/net/tun
crw-rw-rw-    1 root     root       10, 200 Sep 17 10:30 /dev/net/tun

git clone https://github.com/zebernst/synology-csi-talos.git

.
├── Dockerfile
├── Makefile
├── config
│   └── client-info-template.yml
└── deploy
    └── kubernetes
        └── v1.20
            ├── controller.yml
            ├── csi-driver.yml
            ├── namespace.yml
            ├── node.yml
            ├── snapshotter
            │   ├── snapshotter.yaml
            │   └── volume-snapshot-class.yml
            └── storage-class.yml

---
clients:
- host: 192.168.1.1   # ipv4 address or domain of the DSM
  port: 5000          # port for connecting to the DSM
  https: false        # set this true to use https. you need to specify the port to DSM HTTPS port as well
  username: username  # username
  password: password  # password

kubectl create secret -n synology-csi generic client-info-secret --from-file=config/client-info.yml

REGISTRY_NAME=ghcr.io/<username>

---
apiVersion: storage.k8s.io/v1
kind: StorageClass
metadata:
  annotations:
    storageclass.kubernetes.io/is-default-class: "false"
  name: syno-storage
provisioner: csi.san.synology.com
parameters:
  fsType: 'ext4'
  dsm: '192.168.1.1'
  location: '/volume1'
reclaimPolicy: Retain
allowVolumeExpansion: true
---
apiVersion: snapshot.storage.k8s.io/v1
kind: VolumeSnapshotClass
metadata:
  name: syno-snapshot
  annotations:
    storageclass.kubernetes.io/is-default-class: "false"
driver: csi.san.synology.com
deletionPolicy: Delete
parameters:
  description: 'Kubernetes CSI'

kubectl apply -k path/to/manifest/directory

kubectl apply -f <file>

kubectl apply -f speedtest.yaml

kind: PersistentVolumeClaim
apiVersion: v1
metadata:
  name: test-claim
spec:
#  storageClassName: syno-storage
  accessModes:
  - ReadWriteMany
  resources:
    requests:
      storage: 5G
---
apiVersion: batch/v1
kind: Job
metadata:
  name: read
spec:
  template:
    metadata:
      name: read
      labels:
        app: speedtest
        job: read
    spec:
      containers:
      - name: read
        image: ubuntu:xenial
        command: ["dd","if=/mnt/pv/test.img","of=/dev/null","bs=8k"]
        volumeMounts:
        - mountPath: "/mnt/pv"
          name: test-volume
      volumes:
      - name: test-volume
        persistentVolumeClaim:
          claimName: test-claim
      restartPolicy: Never
---
apiVersion: batch/v1
kind: Job
metadata:
  name: write
spec:
  template:
    metadata:
      name: write
      labels:
        app: speedtest
        job: write
    spec:
      containers:
      - name: write
        image: ubuntu:xenial
        command: ["dd","if=/dev/zero","of=/mnt/pv/test.img","bs=1G","count=1","oflag=dsync"]
        volumeMounts:
        - mountPath: "/mnt/pv"
          name: test-volume
      volumes:
      - name: test-volume
        persistentVolumeClaim:
          claimName: test-claim
      restartPolicy: Never

# Pod logs for read test:
kubectl logs -l app=speedtest,job=read

# Pod logs for write test:
kubectl logs -l app=speedtest,job=write

kubectl delete -f speedtest.yaml

machine:
  kubelet:
    extraMounts:
      - destination: /var/mnt
        type: bind
        source: /var/mnt
        options:
          - bind
          - rshared
          - rw

# kustomization.yaml
apiVersion: kustomize.config.k8s.io/v1beta1
kind: Kustomization
resources:
- github.com/rancher/local-path-provisioner/deploy?ref=v0.0.26
patches:
- patch: |-
    kind: ConfigMap
    apiVersion: v1
    metadata:
      name: local-path-config
      namespace: local-path-storage
    data:
      config.json: |-
        {
                "nodePathMap":[
                {
                        "node":"DEFAULT_PATH_FOR_NON_LISTED_NODES",
                        "paths":["/var/local-path-provisioner"]
                }
                ]
        }    
- patch: |-
    apiVersion: storage.k8s.io/v1
    kind: StorageClass
    metadata:
      name: local-path
      annotations:
        storageclass.kubernetes.io/is-default-class: "true"    
- patch: |-
    apiVersion: v1
    kind: Namespace
    metadata:
      name: local-path-storage
      labels:
        pod-security.kubernetes.io/enforce: privileged    

kubectl label namespace NAMESPACE-NAME pod-security.kubernetes.io/enforce=privileged

apiVersion: pod-security.admission.config.k8s.io/v1alpha1
kind: PodSecurityConfiguration
defaults:
    enforce: "baseline"
    enforce-version: "latest"
    audit: "restricted"
    audit-version: "latest"
    warn: "restricted"
    warn-version: "latest"
exemptions:
    usernames: []
    runtimeClasses: []
    namespaces: [kube-system]

$ talosctl get admissioncontrolconfigs.kubernetes.talos.dev admission-control -o yaml
node: 172.20.0.2
metadata:
    namespace: controlplane
    type: AdmissionControlConfigs.kubernetes.talos.dev
    id: admission-control
    version: 1
    owner: config.K8sControlPlaneController
    phase: running
    created: 2022-02-22T20:28:21Z
    updated: 2022-02-22T20:28:21Z
spec:
    config:
        - name: PodSecurity
          configuration:
            apiVersion: pod-security.admission.config.k8s.io/v1alpha1
            defaults:
                audit: restricted
                audit-version: latest
                enforce: baseline
                enforce-version: latest
                warn: restricted
                warn-version: latest
            exemptions:
                namespaces:
                    - kube-system
                runtimeClasses: []
                usernames: []
            kind: PodSecurityConfiguration

$ kubectl create deployment nginx --image=nginx
Warning: would violate PodSecurity "restricted:latest": allowPrivilegeEscalation != false (container "nginx" must set securityContext.allowPrivilegeEscalation=false), unrestricted capabilities (container "nginx" must set securityContext.capabilities.drop=["ALL"]), runAsNonRoot != true (pod or container "nginx" must set securityContext.runAsNonRoot=true), seccompProfile (pod or container "nginx" must set securityContext.seccompProfile.type to "RuntimeDefault" or "Localhost")
deployment.apps/nginx created
$ kubectl get pods
NAME                     READY   STATUS    RESTARTS   AGE
nginx-85b98978db-j68l8   1/1     Running   0          2m3s

apiVersion: apps/v1
kind: DaemonSet
metadata:
  labels:
    app: debug-container
  name: debug-container
  namespace: default
spec:
  revisionHistoryLimit: 10
  selector:
    matchLabels:
      app: debug-container
  template:
    metadata:
      creationTimestamp: null
      labels:
        app: debug-container
    spec:
      containers:
      - args:
        - "360000"
        command:
        - /bin/sleep
        image: ubuntu:latest
        imagePullPolicy: IfNotPresent
        name: debug-container
        resources: {}
        securityContext:
          privileged: true
        terminationMessagePath: /dev/termination-log
        terminationMessagePolicy: File
      dnsPolicy: ClusterFirstWithHostNet
      hostIPC: true
      hostPID: true
      hostNetwork: true
      restartPolicy: Always
      schedulerName: default-scheduler
      securityContext: {}
      terminationGracePeriodSeconds: 30
  updateStrategy:
    rollingUpdate:
      maxSurge: 0
      maxUnavailable: 1
    type: RollingUpdate

$ kubectl apply -f debug.yaml
Warning: would violate PodSecurity "restricted:latest": host namespaces (hostNetwork=true, hostPID=true, hostIPC=true), privileged (container "debug-container" must not set securityContext.privileged=true), allowPrivilegeEscalation != false (container "debug-container" must set securityContext.allowPrivilegeEscalation=false), unrestricted capabilities (container "debug-container" must set securityContext.capabilities.drop=["ALL"]), runAsNonRoot != true (pod or container "debug-container" must set securityContext.runAsNonRoot=true), seccompProfile (pod or container "debug-container" must set securityContext.seccompProfile.type to "RuntimeDefault" or "Localhost")
daemonset.apps/debug-container created

$ kubectl get ds
NAME              DESIRED   CURRENT   READY   UP-TO-DATE   AVAILABLE   NODE SELECTOR   AGE
debug-container   0         0         0       0            0           <none>          34s

$ kubectl describe ds debug-container
...
  Warning  FailedCreate  92s                daemonset-controller  Error creating: pods "debug-container-kwzdj" is forbidden: violates PodSecurity "baseline:latest": host namespaces (hostNetwork=true, hostPID=true, hostIPC=true), privileged (container "debug-container" must not set securityContext.privileged=true)

$ kubectl label ns default pod-security.kubernetes.io/enforce=privileged
namespace/default labeled
$ kubectl get ds
NAME              DESIRED   CURRENT   READY   UP-TO-DATE   AVAILABLE   NODE SELECTOR   AGE
debug-container   2         2         0       2            0           <none>          4s

machine:
  sysctls:
    vm.nr_hugepages: "1024"
  nodeLabels:
    openebs.io/engine: mayastor
  kubelet:
    extraMounts:
      - destination: /var/openebs/local
        type: bind
        source: /var/openebs/local
        options:
          - rbind
          - rshared
          - rw

talosctl -e <endpoint ip/hostname> -n <node ip/hostname> patch mc -p @patch.yaml

helm repo add openebs https://openebs.github.io/openebs
helm repo update
helm upgrade --install openebs \
  --create-namespace \
  --namespace openebs \
  --set engines.local.lvm.enabled=false \
  --set engines.local.zfs.enabled=false \
  --set mayastor.csi.node.initContainers.enabled=false \
  openebs/openebs

pod-security.kubernetes.io/audit: privileged
pod-security.kubernetes.io/enforce: privileged
pod-security.kubernetes.io/warn: privileged

kubectl label ns openebs \
  pod-security.kubernetes.io/audit=privileged \
  pod-security.kubernetes.io/enforce=privileged \
  pod-security.kubernetes.io/warn=privileged

kind: PersistentVolumeClaim
apiVersion: v1
metadata:
  name: example-openebs-pvc
spec:
  storageClassName: openebs-hostpath
  accessModes:
    - ReadWriteOnce
  resources:
    requests:
      storage: 4Gi

apiVersion: apps/v1
kind: Deployment
metadata:
  name: fio
spec:
  selector:
    matchLabels:
      name: fio
  replicas: 1
  strategy:
    type: Recreate
    rollingUpdate: null
  template:
    metadata:
      labels:
        name: fio
    spec:
      containers:
        - name: perfrunner
          image: openebs/tests-fio
          command: ["/bin/bash"]
          args: ["-c", "while true ;do sleep 50; done"]
          volumeMounts:
            - mountPath: /datadir
              name: fio-vol
      volumes:
        - name: fio-vol
          persistentVolumeClaim:
            claimName: example-openebs-pvc

kubectl delete deployment fio
kubectl delete pvc example-openebs-pvc

machine:
  seccompProfiles:
    - name: audit.json
      value:
        defaultAction: SCMP_ACT_LOG

talosctl -e <endpoint ip/hostname> -n <node ip/hostname> patch mc -p @patch.yaml

spec:
  securityContext:
    seccompProfile:
      type: Localhost
      localhostProfile: profiles/audit.json

talosctl -e <endpoint ip/hostname> -n <node ip/hostname> get seccompprofiles

NODE       NAMESPACE   TYPE             ID           VERSION
10.5.0.3   cri         SeccompProfile   audit.json   1

talosctl -e <endpoint ip/hostname> -n <node ip/hostname> read /var/lib/kubelet/seccomp/profiles/audit.json

{"defaultAction":"SCMP_ACT_LOG"}

talosctl -e <endpoint ip/hostname> -n <node ip/hostname> dmesg --follow --tail

kubectl apply -f https://k8s.io/examples/pods/security/seccomp/ga/audit-pod.yaml

10.5.0.3: kern:    info: [2022-07-28T11:49:42.489473063Z]: cni0: port 1(veth32488a86) entered blocking state
10.5.0.3: kern:    info: [2022-07-28T11:49:42.490852063Z]: cni0: port 1(veth32488a86) entered disabled state
10.5.0.3: kern:    info: [2022-07-28T11:49:42.492470063Z]: device veth32488a86 entered promiscuous mode
10.5.0.3: kern:    info: [2022-07-28T11:49:42.503105063Z]: IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
10.5.0.3: kern:    info: [2022-07-28T11:49:42.503944063Z]: IPv6: ADDRCONF(NETDEV_CHANGE): veth32488a86: link becomes ready
10.5.0.3: kern:    info: [2022-07-28T11:49:42.504764063Z]: cni0: port 1(veth32488a86) entered blocking state
10.5.0.3: kern:    info: [2022-07-28T11:49:42.505423063Z]: cni0: port 1(veth32488a86) entered forwarding state
10.5.0.3: kern: warning: [2022-07-28T11:49:44.873616063Z]: kauditd_printk_skb: 14 callbacks suppressed
10.5.0.3: kern:  notice: [2022-07-28T11:49:44.873619063Z]: audit: type=1326 audit(1659008985.445:25): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=2784 comm="runc:[2:INIT]" exe="/" sig=0 arch=c000003e syscall=3 compat=0 ip=0x55ec0657bd3b code=0x7ffc0000
10.5.0.3: kern:  notice: [2022-07-28T11:49:44.876609063Z]: audit: type=1326 audit(1659008985.445:26): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=2784 comm="runc:[2:INIT]" exe="/" sig=0 arch=c000003e syscall=3 compat=0 ip=0x55ec0657bd3b code=0x7ffc0000
10.5.0.3: kern:  notice: [2022-07-28T11:49:44.878789063Z]: audit: type=1326 audit(1659008985.449:27): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=2784 comm="runc:[2:INIT]" exe="/" sig=0 arch=c000003e syscall=257 compat=0 ip=0x55ec0657bdaa code=0x7ffc0000
10.5.0.3: kern:  notice: [2022-07-28T11:49:44.886693063Z]: audit: type=1326 audit(1659008985.461:28): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=2784 comm="runc:[2:INIT]" exe="/" sig=0 arch=c000003e syscall=202 compat=0 ip=0x55ec06532b43 code=0x7ffc0000
10.5.0.3: kern:  notice: [2022-07-28T11:49:44.888764063Z]: audit: type=1326 audit(1659008985.461:29): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=2784 comm="runc:[2:INIT]" exe="/" sig=0 arch=c000003e syscall=202 compat=0 ip=0x55ec06532b43 code=0x7ffc0000
10.5.0.3: kern:  notice: [2022-07-28T11:49:44.891009063Z]: audit: type=1326 audit(1659008985.461:30): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=2784 comm="runc:[2:INIT]" exe="/" sig=0 arch=c000003e syscall=1 compat=0 ip=0x55ec0657bd3b code=0x7ffc0000
10.5.0.3: kern:  notice: [2022-07-28T11:49:44.893162063Z]: audit: type=1326 audit(1659008985.461:31): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=2784 comm="runc:[2:INIT]" exe="/" sig=0 arch=c000003e syscall=3 compat=0 ip=0x55ec0657bd3b code=0x7ffc0000
10.5.0.3: kern:  notice: [2022-07-28T11:49:44.895365063Z]: audit: type=1326 audit(1659008985.461:32): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=2784 comm="runc:[2:INIT]" exe="/" sig=0 arch=c000003e syscall=39 compat=0 ip=0x55ec066eb68b code=0x7ffc0000
10.5.0.3: kern:  notice: [2022-07-28T11:49:44.898306063Z]: audit: type=1326 audit(1659008985.461:33): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=2784 comm="runc:[2:INIT]" exe="/" sig=0 arch=c000003e syscall=59 compat=0 ip=0x55ec0657be16 code=0x7ffc0000
10.5.0.3: kern:  notice: [2022-07-28T11:49:44.901518063Z]: audit: type=1326 audit(1659008985.473:34): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=2784 comm="http-echo" exe="/http-echo" sig=0 arch=c000003e syscall=158 compat=0 ip=0x455f35 code=0x7ffc0000

kubectl delete pod audit-pod

- op: add
  path: /machine/sysctls
  value:
    vm.nr_hugepages: "1024"
- op: add
  path: /machine/nodeLabels
  value:
    openebs.io/engine: mayastor

talosctl gen config my-cluster https://mycluster.local:6443 --config-patch @mayastor-patch.yaml

talosctl patch --mode=no-reboot machineconfig -n <node ip> --patch @mayastor-patch.yaml

talosctl -n <node ip> service kubelet restart

# Create device pool on a blank (no partition table!) disk on node01
kubectl linstor physical-storage create-device-pool --pool-name nvme_lvm_pool LVM node01 /dev/nvme0n1 --storage-pool nvme_pool

apiVersion: storage.k8s.io/v1
kind: StorageClass
metadata:
  name: simple-nvme
parameters:
  csi.storage.k8s.io/fstype: xfs
  linstor.csi.linbit.com/autoPlace: "3"
  linstor.csi.linbit.com/storagePool: nvme_pool
provisioner: linstor.csi.linbit.com
volumeBindingMode: WaitForFirstConsumer

# Create storage class
kubectl apply -f piraeus-sc.yml

cluster:
  network:
    cni:
      name: none

talosctl gen config \
    my-cluster https://mycluster.local:6443 \
    --config-patch @patch.yaml

cluster:
  network:
    cni:
      name: none
  proxy:
    disabled: true

talosctl gen config \
    my-cluster https://mycluster.local:6443 \
    --config-patch @patch.yaml

cilium install \
    --set ipam.mode=kubernetes \
    --set kubeProxyReplacement=false \
    --set securityContext.capabilities.ciliumAgent="{CHOWN,KILL,NET_ADMIN,NET_RAW,IPC_LOCK,SYS_ADMIN,SYS_RESOURCE,DAC_OVERRIDE,FOWNER,SETGID,SETUID}" \
    --set securityContext.capabilities.cleanCiliumState="{NET_ADMIN,SYS_ADMIN,SYS_RESOURCE}" \
    --set cgroup.autoMount.enabled=false \
    --set cgroup.hostRoot=/sys/fs/cgroup

cilium install \
    --set ipam.mode=kubernetes \
    --set kubeProxyReplacement=true \
    --set securityContext.capabilities.ciliumAgent="{CHOWN,KILL,NET_ADMIN,NET_RAW,IPC_LOCK,SYS_ADMIN,SYS_RESOURCE,DAC_OVERRIDE,FOWNER,SETGID,SETUID}" \
    --set securityContext.capabilities.cleanCiliumState="{NET_ADMIN,SYS_ADMIN,SYS_RESOURCE}" \
    --set cgroup.autoMount.enabled=false \
    --set cgroup.hostRoot=/sys/fs/cgroup \
    --set k8sServiceHost=localhost \
    --set k8sServicePort=7445

helm repo add cilium https://helm.cilium.io/
helm repo update

helm install \
    cilium \
    cilium/cilium \
    --version 1.15.6 \
    --namespace kube-system \
    --set ipam.mode=kubernetes \
    --set kubeProxyReplacement=false \
    --set securityContext.capabilities.ciliumAgent="{CHOWN,KILL,NET_ADMIN,NET_RAW,IPC_LOCK,SYS_ADMIN,SYS_RESOURCE,DAC_OVERRIDE,FOWNER,SETGID,SETUID}" \
    --set securityContext.capabilities.cleanCiliumState="{NET_ADMIN,SYS_ADMIN,SYS_RESOURCE}" \
    --set cgroup.autoMount.enabled=false \
    --set cgroup.hostRoot=/sys/fs/cgroup

helm install \
    cilium \
    cilium/cilium \
    --version 1.15.6 \
    --namespace kube-system \
    --set ipam.mode=kubernetes \
    --set kubeProxyReplacement=true \
    --set securityContext.capabilities.ciliumAgent="{CHOWN,KILL,NET_ADMIN,NET_RAW,IPC_LOCK,SYS_ADMIN,SYS_RESOURCE,DAC_OVERRIDE,FOWNER,SETGID,SETUID}" \
    --set securityContext.capabilities.cleanCiliumState="{NET_ADMIN,SYS_ADMIN,SYS_RESOURCE}" \
    --set cgroup.autoMount.enabled=false \
    --set cgroup.hostRoot=/sys/fs/cgroup \
    --set k8sServiceHost=localhost \
    --set k8sServicePort=7445

helm template \
    cilium \
    cilium/cilium \
    --version 1.15.6 \
    --namespace kube-system \
    --set ipam.mode=kubernetes \
    --set kubeProxyReplacement=false \
    --set securityContext.capabilities.ciliumAgent="{CHOWN,KILL,NET_ADMIN,NET_RAW,IPC_LOCK,SYS_ADMIN,SYS_RESOURCE,DAC_OVERRIDE,FOWNER,SETGID,SETUID}" \
    --set securityContext.capabilities.cleanCiliumState="{NET_ADMIN,SYS_ADMIN,SYS_RESOURCE}" \
    --set cgroup.autoMount.enabled=false \
    --set cgroup.hostRoot=/sys/fs/cgroup > cilium.yaml

kubectl apply -f cilium.yaml

helm template \
    cilium \
    cilium/cilium \
    --version 1.15.6 \
    --namespace kube-system \
    --set ipam.mode=kubernetes \
    --set kubeProxyReplacement=true \
    --set securityContext.capabilities.ciliumAgent="{CHOWN,KILL,NET_ADMIN,NET_RAW,IPC_LOCK,SYS_ADMIN,SYS_RESOURCE,DAC_OVERRIDE,FOWNER,SETGID,SETUID}" \
    --set securityContext.capabilities.cleanCiliumState="{NET_ADMIN,SYS_ADMIN,SYS_RESOURCE}" \
    --set cgroup.autoMount.enabled=false \
    --set cgroup.hostRoot=/sys/fs/cgroup \
    --set k8sServiceHost=localhost \
    --set k8sServicePort=7445 > cilium.yaml

kubectl apply -f cilium.yaml

cluster:
  network:
    cni:
      name: custom
      urls:
        - https://server.yourdomain.tld/some/path/cilium.yaml

talosctl gen config \
  my-cluster https://mycluster.local:6443 \
  --config-patch @patch.yaml

cluster:
  network:
    cni:
      name: none

talosctl gen config \
  my-cluster https://mycluster.local:6443 \
  --config-patch @patch.yaml

cluster:
  network:
    cni:
      name: none
  proxy:
    disabled: true

talosctl gen config \
  my-cluster https://mycluster.local:6443 \
  --config-patch @patch.yaml

cluster:
  inlineManifests:
    - name: cilium
      contents: |
        --
        # Source: cilium/templates/cilium-agent/serviceaccount.yaml
        apiVersion: v1
        kind: ServiceAccount
        metadata:
          name: "cilium"
          namespace: kube-system
        ---
        # Source: cilium/templates/cilium-operator/serviceaccount.yaml
        apiVersion: v1
        kind: ServiceAccount
        -> Your cilium.yaml file will be pretty long....        

 inlineManifests:
    - name: cilium-install
      contents: |
        ---
        apiVersion: rbac.authorization.k8s.io/v1
        kind: ClusterRoleBinding
        metadata:
          name: cilium-install
        roleRef:
          apiGroup: rbac.authorization.k8s.io
          kind: ClusterRole
          name: cluster-admin
        subjects:
        - kind: ServiceAccount
          name: cilium-install
          namespace: kube-system
        ---
        apiVersion: v1
        kind: ServiceAccount
        metadata:
          name: cilium-install
          namespace: kube-system
        ---
        apiVersion: batch/v1
        kind: Job
        metadata:
          name: cilium-install
          namespace: kube-system
        spec:
          backoffLimit: 10
          template:
            metadata:
              labels:
                app: cilium-install
            spec:
              restartPolicy: OnFailure
              tolerations:
                - operator: Exists
                - effect: NoSchedule
                  operator: Exists
                - effect: NoExecute
                  operator: Exists
                - effect: PreferNoSchedule
                  operator: Exists
                - key: node-role.kubernetes.io/control-plane
                  operator: Exists
                  effect: NoSchedule
                - key: node-role.kubernetes.io/control-plane
                  operator: Exists
                  effect: NoExecute
                - key: node-role.kubernetes.io/control-plane
                  operator: Exists
                  effect: PreferNoSchedule
              affinity:
                nodeAffinity:
                  requiredDuringSchedulingIgnoredDuringExecution:
                    nodeSelectorTerms:
                      - matchExpressions:
                          - key: node-role.kubernetes.io/control-plane
                            operator: Exists
              serviceAccount: cilium-install
              serviceAccountName: cilium-install
              hostNetwork: true
              containers:
              - name: cilium-install
                image: quay.io/cilium/cilium-cli-ci:latest
                env:
                - name: KUBERNETES_SERVICE_HOST
                  valueFrom:
                    fieldRef:
                      apiVersion: v1
                      fieldPath: status.podIP
                - name: KUBERNETES_SERVICE_PORT
                  value: "6443"
                command:
                  - cilium
                  - install
                  - --set ipam.mode=kubernetes
                  - --set kubeProxyReplacement=true
                  - --set securityContext.capabilities.ciliumAgent="{CHOWN,KILL,NET_ADMIN,NET_RAW,IPC_LOCK,SYS_ADMIN,SYS_RESOURCE,DAC_OVERRIDE,FOWNER,SETGID,SETUID}"
                  - --set securityContext.capabilities.cleanCiliumState="{NET_ADMIN,SYS_ADMIN,SYS_RESOURCE}"
                  - --set cgroup.autoMount.enabled=false
                  - --set cgroup.hostRoot=/sys/fs/cgroup
                  - --set k8sServiceHost=localhost
                  - --set k8sServicePort=7445        

kubectl apply -f https://raw.githubusercontent.com/k8snetworkplumbingwg/multus-cni/master/deployments/multus-daemonset-thick.yml

...
        - name: host-run-netns
          hostPath:
            path: /var/run/netns/

  Normal   Scheduled               3s    default-scheduler  Successfully assigned virtualmachines/samplepod to virt2
  Warning  FailedCreatePodSandBox  3s    kubelet            Failed to create pod sandbox: rpc error: code = Unknown desc = failed to setup network for sandbox "3a6a58386dfbf2471a6f86bd41e4e9a32aac54ccccd1943742cb67d1e9c58b5b": plugin type="multus-shim" name="multus-cni-network" failed (add): CmdAdd (shim): CNI request failed with status 400: 'ContainerID:"3a6a58386dfbf2471a6f86bd41e4e9a32aac54ccccd1943742cb67d1e9c58b5b" Netns:"/var/run/netns/cni-1d80f6e3-fdab-4505-eb83-7deb17431293" IfName:"eth0" Args:"IgnoreUnknown=1;K8S_POD_NAMESPACE=virtualmachines;K8S_POD_NAME=samplepod;K8S_POD_INFRA_CONTAINER_ID=3a6a58386dfbf2471a6f86bd41e4e9a32aac54ccccd1943742cb67d1e9c58b5b;K8S_POD_UID=8304765e-fd7e-4968-9144-c42c53be04f4" Path:"" ERRORED: error configuring pod [virtualmachines/samplepod] networking: [virtualmachines/samplepod/8304765e-fd7e-4968-9144-c42c53be04f4:cbr0]: error adding container to network "cbr0": DelegateAdd: cannot set "" interface name to "eth0": validateIfName: no net namespace /var/run/netns/cni-1d80f6e3-fdab-4505-eb83-7deb17431293 found: failed to Statfs "/var/run/netns/cni-1d80f6e3-fdab-4505-eb83-7deb17431293": no such file or directory
': StdinData: {"capabilities":{"portMappings":true},"clusterNetwork":"/host/etc/cni/net.d/10-flannel.conflist","cniVersion":"0.3.1","logLevel":"verbose","logToStderr":true,"name":"multus-cni-network","type":"multus-shim"}

apiVersion: "k8s.cni.cncf.io/v1"
kind: NetworkAttachmentDefinition
metadata:
  name: macvlan-conf
spec:
  config: '{
      "cniVersion": "0.3.0",
      "type": "macvlan",
      "master": "eth0",
      "mode": "bridge",
      "ipam": {
        "type": "host-local",
        "subnet": "192.168.1.0/24",
        "rangeStart": "192.168.1.200",
        "rangeEnd": "192.168.1.216",
        "routes": [
          { "dst": "0.0.0.0/0" }
        ],
        "gateway": "192.168.1.1"
      }
    }'

machine:
      interfaces:
      - interface: br0
        addresses:
          - 172.16.1.60/24
        bridge:
          stp:
            enabled: true
          interfaces:
              - eno1 # This must be changed to your matching interface name
        routes:
            - network: 0.0.0.0/0 # The route's network (destination).
              gateway: 172.16.1.254 # The route's gateway (if empty, creates link scope route).
              metric: 1024 # The optional metric for the route.

apiVersion: v1
kind: Pod
metadata:
  name: samplepod
  annotations:
    k8s.v1.cni.cncf.io/networks: macvlan-conf
spec:
  containers:
  - name: samplepod
    command: ["/bin/ash", "-c", "trap : TERM INT; sleep infinity & wait"]
    image: alpine

apiVersion: apps/v1
kind: DaemonSet
metadata:
  name: kube-multus-ds
  namespace: kube-system
spec:
  template:
    spec:
      initContainers:
      - command:
        - /install-cni.sh
        image: ghcr.io/siderolabs/install-cni:v1.7.0  # adapt to your talos version
        name: install-cni
        securityContext:
          privileged: true
        volumeMounts:
        - mountPath: /host/opt/cni/bin
          mountPropagation: Bidirectional
          name: cnibin

$ talosctl --nodes <controlplane node> upgrade-k8s --to 1.31.1 --dry-run
WARNING: found resources which are going to be deprecated/migrated in the version 1.31.1
RESOURCE                                                               COUNT
validatingwebhookconfigurations.v1beta1.admissionregistration.k8s.io   4
mutatingwebhookconfigurations.v1beta1.admissionregistration.k8s.io     3
customresourcedefinitions.v1beta1.apiextensions.k8s.io                 25
apiservices.v1beta1.apiregistration.k8s.io                             54
leases.v1beta1.coordination.k8s.io                                     4
automatically detected the lowest Kubernetes version 1.30.0
checking for resource APIs to be deprecated in version 1.31.1
discovered controlplane nodes ["172.20.0.2" "172.20.0.3" "172.20.0.4"]
discovered worker nodes ["172.20.0.5" "172.20.0.6"]
updating "kube-apiserver" to version "1.31.1"
 > "172.20.0.2": starting update
 > update kube-apiserver: v1.30.0 -> 1.31.1
 > skipped in dry-run
 > "172.20.0.3": starting update
 > update kube-apiserver: v1.30.0 -> 1.31.1
 > skipped in dry-run
 > "172.20.0.4": starting update
 > update kube-apiserver: v1.30.0 -> 1.31.1
 > skipped in dry-run
updating "kube-controller-manager" to version "1.31.1"
 > "172.20.0.2": starting update
 > update kube-controller-manager: v1.30.0 -> 1.31.1
 > skipped in dry-run
 > "172.20.0.3": starting update

<snip>

updating manifests
 > apply manifest Secret bootstrap-token-3lb63t
 > apply skipped in dry run
 > apply manifest ClusterRoleBinding system-bootstrap-approve-node-client-csr
 > apply skipped in dry run
<snip>

$ talosctl --nodes <controlplane node> upgrade-k8s --to 1.31.1
automatically detected the lowest Kubernetes version 1.30.0
checking for resource APIs to be deprecated in version 1.31.1
discovered controlplane nodes ["172.20.0.2" "172.20.0.3" "172.20.0.4"]
discovered worker nodes ["172.20.0.5" "172.20.0.6"]
updating "kube-apiserver" to version "1.31.1"
 > "172.20.0.2": starting update
 > update kube-apiserver: v1.30.0 -> 1.31.1
 > "172.20.0.2": machine configuration patched
 > "172.20.0.2": waiting for API server state pod update
 < "172.20.0.2": successfully updated
 > "172.20.0.3": starting update
 > update kube-apiserver: v1.30.0 -> 1.31.1
<snip>

talosctl --nodes <controlplane node> kubeconfig

$ talosctl -n <CONTROL_PLANE_IP_1> patch mc --mode=no-reboot -p '[{"op": "replace", "path": "/cluster/apiServer/image", "value": "registry.k8s.io/kube-apiserver:v1.31.1"}]'
patched mc at the node 172.20.0.2

$ talosctl -n <CONTROL_PLANE_IP_1> get apiserverconfig -o yaml
node: 172.20.0.2
metadata:
    namespace: controlplane
    type: APIServerConfigs.kubernetes.talos.dev
    id: kube-apiserver
    version: 5
    owner: k8s.ControlPlaneAPIServerController
    phase: running
spec:
    image: registry.k8s.io/kube-apiserver:v1.31.1
    cloudProvider: ""
    controlPlaneEndpoint: https://172.20.0.1:6443
    etcdServers:
        - https://localhost:2379
    localPort: 6443
    serviceCIDR:
        - 10.96.0.0/12
    extraArgs: {}
    extraVolumes: []
    environmentVariables: {}
    podSecurityPolicyEnabled: false
    advertisedAddress: $(POD_IP)
    resources:
        requests:
            cpu: ""
            memory: ""
        limits: {}

$ kubectl get pod -n kube-system -l k8s-app=kube-apiserver --field-selector spec.nodeName=talos-default-controlplane-1 -o jsonpath='{.items[0].metadata.annotations.talos\.dev/config\-version}'
5

$ kubectl get pod -n kube-system -l k8s-app=kube-apiserver --field-selector spec.nodeName=talos-default-controlplane-1
NAME                                    READY   STATUS    RESTARTS   AGE
kube-apiserver-talos-default-controlplane-1   1/1     Running   0          16m

$ talosctl -n <CONTROL_PLANE_IP_1> patch mc --mode=no-reboot -p '[{"op": "replace", "path": "/cluster/controllerManager/image", "value": "registry.k8s.io/kube-controller-manager:v1.31.1"}]'
patched mc at the node 172.20.0.2

$ talosctl -n <CONTROL_PLANE_IP_1> get kcpc controllermanagerconfig -o yaml
node: 172.20.0.2
metadata:
    namespace: controlplane
    type: ControllerManagerConfigs.kubernetes.talos.dev
    id: kube-controller-manager
    version: 3
    owner: k8s.ControlPlaneControllerManagerController
    phase: running
spec:
    enabled: true
    image: registry.k8s.io/kube-controller-manager:v1.31.1
    cloudProvider: ""
    podCIDRs:
        - 10.244.0.0/16
    serviceCIDRs:
        - 10.96.0.0/12
    extraArgs: {}
    extraVolumes: []
    environmentVariables: {}
    resources:
        requests:
            cpu: ""
            memory: ""
        limits: {}

$ kubectl get pod -n kube-system -l k8s-app=kube-controller-manager --field-selector spec.nodeName=talos-default-controlplane-1 -o jsonpath='{.items[0].metadata.annotations.talos\.dev/config\-version}'
3

$ kubectl get pod -n kube-system -l k8s-app=kube-controller-manager --field-selector spec.nodeName=talos-default-controlplane-1
NAME                                             READY   STATUS    RESTARTS   AGE
kube-controller-manager-talos-default-controlplane-1   1/1     Running   0          35m

$ talosctl -n <CONTROL_PLANE_IP_1> patch mc --mode=no-reboot -p '[{"op": "replace", "path": "/cluster/scheduler/image", "value": "registry.k8s.io/kube-scheduler:v1.31.1"}]'
patched mc at the node 172.20.0.2

$ talosctl -n <CONTROL_PLANE_IP_1> get schedulerconfig -o yaml
node: 172.20.0.2
metadata:
    namespace: controlplane
    type: SchedulerConfigs.kubernetes.talos.dev
    id: kube-scheduler
    version: 3
    owner: k8s.ControlPlaneSchedulerController
    phase: running
    created: 2024-11-06T12:37:22Z
    updated: 2024-11-06T12:37:20Z
spec:
    enabled: true
    image: registry.k8s.io/kube-scheduler:v1.31.1
    extraArgs: {}
    extraVolumes: []
    environmentVariables: {}
    resources:
        requests:
            cpu: ""
            memory: ""
        limits: {}
    config: {}

$ kubectl get pod -n kube-system -l k8s-app=kube-scheduler --field-selector spec.nodeName=talos-default-controlplane-1 -o jsonpath='{.items[0].metadata.annotations.talos\.dev/config\-version}'
3

$ kubectl get pod -n kube-system -l k8s-app=kube-scheduler --field-selector spec.nodeName=talos-default-controlplane-1
NAME                                    READY   STATUS    RESTARTS   AGE
kube-scheduler-talos-default-controlplane-1   1/1     Running   0          39m

kind: DaemonSet
...
spec:
  ...
  template:
    ...
    spec:
      containers:
        - name: kube-proxy
          image: registry.k8s.io/kube-proxy:v1.31.1
      tolerations:
        - ...

kind: DaemonSet
...
spec:
  ...
  template:
    ...
    spec:
      containers:
        - name: kube-proxy
          image: registry.k8s.io/kube-proxy:v1.31.1
      tolerations:
        - ...
        - key: node-role.kubernetes.io/control-plane
          operator: Exists
          effect: NoSchedule

kubectl edit daemonsets -n kube-system kube-proxy

talosctl -n <controlplane IP> get manifests -o yaml | yq eval-all '.spec | .[] | splitDoc' - > manifests.yaml

kubectl diff -f manifests.yaml

kubectl apply -f manifests.yaml

$ talosctl -n <IP> patch mc --mode=no-reboot -p '[{"op": "replace", "path": "/machine/kubelet/image", "value": "ghcr.io/siderolabs/kubelet:v1.31.1"}]'
patched mc at the node 172.20.0.2

$ kubectl get nodes talos-default-controlplane-1
NAME                           STATUS   ROLES                  AGE    VERSION
talos-default-controlplane-1   Ready    control-plane          123m   v1.31.1