This is the multi-page printable view of this section. Click here to print.
v1alpha1
Package v1alpha1 contains definition of the v1alpha1 configuration document.
Even though the machine configuration in Talos Linux is multi-document, at the moment this configuration document contains most of the configuration options.
It is expected that new configuration options will be added as new documents, and existing ones migrated to their own documents.
- 1: Config
1 - Config
Config defines the v1alpha1.Config Talos machine configuration document.
version: v1alpha1
machine: # ...
cluster: # ...| Field | Type | Description | Value(s) |
|---|---|---|---|
version | string | Indicates the schema used to decode the contents. | v1alpha1 |
debug | bool | Enable verbose logging to the console.All system containers logs will flow into serial console.Note: To avoid breaking Talos bootstrap flow enable this option only if serial console can handle high message throughput. | trueyesfalseno |
machine | MachineConfig | Provides machine specific configuration options. | |
cluster | ClusterConfig | Provides cluster specific configuration options. |
machine
MachineConfig represents the machine-specific config values.
machine:
type: controlplane
# InstallConfig represents the installation options for preparing a node.
install:
disk: /dev/sda # The disk used for installations.
# Allows for supplying extra kernel args via the bootloader.
extraKernelArgs:
- console=ttyS1
- panic=10
image: ghcr.io/siderolabs/installer:latest # Allows for supplying the image used to perform the installation.
wipe: false # Indicates if the installation disk should be wiped at installation time.
# # Look up disk using disk attributes like model, size, serial and others.
# diskSelector:
# size: 4GB # Disk size.
# model: WDC* # Disk model `/sys/block/<dev>/device/model`.
# busPath: /pci0000:00/0000:00:17.0/ata1/host0/target0:0:0/0:0:0:0 # Disk bus path.
# # Allows for supplying additional system extension images to install on top of base Talos image.
# extensions:
# - image: ghcr.io/siderolabs/gvisor:20220117.0-v1.0.0 # System extension image.| Field | Type | Description | Value(s) |
|---|---|---|---|
type | string | Defines the role of the machine within the cluster.Control Plane Control Plane node type designates the node as a control plane member. This means it will host etcd along with the Kubernetes controlplane components such as API Server, Controller Manager, Scheduler. Worker Worker node type designates the node as a worker node. This means it will be an available compute node for scheduling workloads. This node type was previously known as “join”; that value is still supported but deprecated. | controlplaneworker |
token | string | The Using this token, a machine will create a certificate signing request (CSR), and request a certificate that will be used as its’ identity. | |
ca | PEMEncodedCertificateAndKey | The root certificate authority of the PKI.It is composed of a base64 encodedcrt and key.Show example(s) | |
acceptedCAs | []PEMEncodedCertificate | The certificates issued by certificate authorities are accepted in addition to issuing ‘ca’.It is composed of a base64 encoded `crt``. | |
certSANs | []string | Extra certificate subject alternative names for the machine’s certificate.By default, all non-loopback interface IPs are automatically added to the certificate’s SANs.Show example(s) | |
controlPlane | MachineControlPlaneConfig | Provides machine specific control plane configuration options. Show example(s) | |
kubelet | KubeletConfig | Used to provide additional options to the kubelet. Show example(s) | |
pods | []Unstructured | Used to provide static pod definitions to be run by the kubelet directly bypassing the kube-apiserver.Static pods can be used to run components which should be started before the Kubernetes control plane is up. Talos doesn’t validate the pod definition. Updates to this field can be applied without a reboot. See https://kubernetes.io/docs/tasks/configure-pod-container/static-pod/. Show example(s) | |
network | NetworkConfig | Provides machine specific network configuration options. Show example(s) | |
disks | []MachineDisk | Used to partition, format and mount additional disks.Since the rootfs is read only with the exception of/var, mounts are only valid if they are under /var.Note that the partitioning and formatting is done only once, if and only if no existing XFS partitions are found. If size: is omitted, the partition is sized to occupy the full disk.Show example(s) | |
install | InstallConfig | Used to provide instructions for installations.Note that this configuration section gets silently ignored by Talos images that are considered pre-installed. To make sure Talos installs according to the provided configuration, Talos should be booted with ISO or PXE-booted. Show example(s) | |
files | []MachineFile | Allows the addition of user specified files.The value ofop can be create, overwrite, or append.In the case of create, path must not exist.In the case of overwrite, and append, path must be a valid file.If an op value of append is used, the existing file will be appended.Note that the file contents are not required to be base64 encoded. Show example(s) | |
env | Env | The All environment variables are set on PID 1 in addition to every service. | GRPC_GO_LOG_VERBOSITY_LEVELGRPC_GO_LOG_SEVERITY_LEVELhttp_proxyhttps_proxyno_proxy |
time | TimeConfig | Used to configure the machine’s time settings. Show example(s) | |
sysctls | map[string]string | Used to configure the machine’s sysctls. Show example(s) | |
sysfs | map[string]string | Used to configure the machine’s sysfs. Show example(s) | |
registries | RegistriesConfig | Used to configure the machine’s container image registry mirrors.Automatically generates matching CRI configuration for registry mirrors. The mirrors section allows to redirect requests for images to a non-default registry,which might be a local registry or a caching mirror. The config section provides a way to authenticate to the registry with TLS clientidentity, provide registry CA, or authentication information. Authentication information has same meaning with the corresponding field in .docker/config.json.See also matching configuration for CRI containerd plugin. Show example(s) | |
systemDiskEncryption | SystemDiskEncryptionConfig | Machine system disk encryption configuration.Defines each system partition encryption parameters.Show example(s) | |
features | FeaturesConfig | Features describe individual Talos features that can be switched on or off. Show example(s) | |
udev | UdevConfig | Configures the udev system. Show example(s) | |
logging | LoggingConfig | Configures the logging system. Show example(s) | |
kernel | KernelConfig | Configures the kernel. Show example(s) | |
seccompProfiles | []MachineSeccompProfile | Configures the seccomp profiles for the machine. Show example(s) | |
nodeLabels | map[string]string | Configures the node labels for the machine.Note: In the default Kubernetes configuration, worker nodes are restricted to set labels with some prefixes (see NodeRestriction admission plugin). Show example(s) | |
nodeTaints | map[string]string | Configures the node taints for the machine. Effect is optional.Note: In the default Kubernetes configuration, worker nodes are not allowed to modify the taints (see NodeRestriction admission plugin). Show example(s) |
controlPlane
MachineControlPlaneConfig machine specific configuration options.
machine:
controlPlane:
# Controller manager machine specific configuration options.
controllerManager:
disabled: false # Disable kube-controller-manager on the node.
# Scheduler machine specific configuration options.
scheduler:
disabled: true # Disable kube-scheduler on the node.| Field | Type | Description | Value(s) |
|---|---|---|---|
controllerManager | MachineControllerManagerConfig | Controller manager machine specific configuration options. | |
scheduler | MachineSchedulerConfig | Scheduler machine specific configuration options. |
controllerManager
MachineControllerManagerConfig represents the machine specific ControllerManager config values.
| Field | Type | Description | Value(s) |
|---|---|---|---|
disabled | bool | Disable kube-controller-manager on the node. |
scheduler
MachineSchedulerConfig represents the machine specific Scheduler config values.
| Field | Type | Description | Value(s) |
|---|---|---|---|
disabled | bool | Disable kube-scheduler on the node. |
kubelet
KubeletConfig represents the kubelet config values.
machine:
kubelet:
image: ghcr.io/siderolabs/kubelet:v1.30.0 # The `image` field is an optional reference to an alternative kubelet image.
# The `extraArgs` field is used to provide additional flags to the kubelet.
extraArgs:
feature-gates: ServerSideApply=true
# # The `ClusterDNS` field is an optional reference to an alternative kubelet clusterDNS ip list.
# clusterDNS:
# - 10.96.0.10
# - 169.254.2.53
# # The `extraMounts` field is used to add additional mounts to the kubelet container.
# extraMounts:
# - destination: /var/lib/example # Destination is the absolute path where the mount will be placed in the container.
# type: bind # Type specifies the mount kind.
# source: /var/lib/example # Source specifies the source path of the mount.
# # Options are fstab style mount options.
# options:
# - bind
# - rshared
# - rw
# # The `extraConfig` field is used to provide kubelet configuration overrides.
# extraConfig:
# serverTLSBootstrap: true
# # The `KubeletCredentialProviderConfig` field is used to provide kubelet credential configuration.
# credentialProviderConfig:
# apiVersion: kubelet.config.k8s.io/v1
# kind: CredentialProviderConfig
# providers:
# - apiVersion: credentialprovider.kubelet.k8s.io/v1
# defaultCacheDuration: 12h
# matchImages:
# - '*.dkr.ecr.*.amazonaws.com'
# - '*.dkr.ecr.*.amazonaws.com.cn'
# - '*.dkr.ecr-fips.*.amazonaws.com'
# - '*.dkr.ecr.us-iso-east-1.c2s.ic.gov'
# - '*.dkr.ecr.us-isob-east-1.sc2s.sgov.gov'
# name: ecr-credential-provider
# # The `nodeIP` field is used to configure `--node-ip` flag for the kubelet.
# nodeIP:
# # The `validSubnets` field configures the networks to pick kubelet node IP from.
# validSubnets:
# - 10.0.0.0/8
# - '!10.0.0.3/32'
# - fdc7::/16| Field | Type | Description | Value(s) |
|---|---|---|---|
image | string | The image field is an optional reference to an alternative kubelet image. Show example(s) | |
clusterDNS | []string | The ClusterDNS field is an optional reference to an alternative kubelet clusterDNS ip list. Show example(s) | |
extraArgs | map[string]string | The extraArgs field is used to provide additional flags to the kubelet. Show example(s) | |
extraMounts | []ExtraMount | The Note that either | |
extraConfig | Unstructured | The | |
credentialProviderConfig | Unstructured | The KubeletCredentialProviderConfig field is used to provide kubelet credential configuration. Show example(s) | |
defaultRuntimeSeccompProfileEnabled | bool | Enable container runtime default Seccomp profile. | trueyesfalseno |
registerWithFQDN | bool | The This is required in clouds like AWS. | trueyesfalseno |
nodeIP | KubeletNodeIPConfig | The This is used when a node has multiple addresses to choose from. | |
skipNodeRegistration | bool | The This runs kubelet as standalone and only runs static pods. | trueyesfalseno |
disableManifestsDirectory | bool | The It’s recommended to configure static pods with the “pods” key instead. | trueyesfalseno |
extraMounts[]
ExtraMount wraps OCI Mount specification.
machine:
kubelet:
extraMounts:
- destination: /var/lib/example # Destination is the absolute path where the mount will be placed in the container.
type: bind # Type specifies the mount kind.
source: /var/lib/example # Source specifies the source path of the mount.
# Options are fstab style mount options.
options:
- bind
- rshared
- rw| Field | Type | Description | Value(s) |
|---|---|---|---|
destination | string | Destination is the absolute path where the mount will be placed in the container. | |
type | string | Type specifies the mount kind. | |
source | string | Source specifies the source path of the mount. | |
options | []string | Options are fstab style mount options. | |
uidMappings | []LinuxIDMapping | UID/GID mappings used for changing file owners w/o calling chown, fs should support it.Every mount point could have its own mapping. | |
gidMappings | []LinuxIDMapping | UID/GID mappings used for changing file owners w/o calling chown, fs should support it.Every mount point could have its own mapping. |
uidMappings[]
LinuxIDMapping represents the Linux ID mapping.
| Field | Type | Description | Value(s) |
|---|---|---|---|
containerID | uint32 | ContainerID is the starting UID/GID in the container. | |
hostID | uint32 | HostID is the starting UID/GID on the host to be mapped to ‘ContainerID’. | |
size | uint32 | Size is the number of IDs to be mapped. |
gidMappings[]
LinuxIDMapping represents the Linux ID mapping.
| Field | Type | Description | Value(s) |
|---|---|---|---|
containerID | uint32 | ContainerID is the starting UID/GID in the container. | |
hostID | uint32 | HostID is the starting UID/GID on the host to be mapped to ‘ContainerID’. | |
size | uint32 | Size is the number of IDs to be mapped. |
nodeIP
KubeletNodeIPConfig represents the kubelet node IP configuration.
machine:
kubelet:
nodeIP:
# The `validSubnets` field configures the networks to pick kubelet node IP from.
validSubnets:
- 10.0.0.0/8
- '!10.0.0.3/32'
- fdc7::/16| Field | Type | Description | Value(s) |
|---|---|---|---|
validSubnets | []string | The For dual stack configuration, there should be two subnets: one for IPv4, another for IPv6. |
network
NetworkConfig represents the machine’s networking config values.
machine:
network:
hostname: worker-1 # Used to statically set the hostname for the machine.
# `interfaces` is used to define the network interface configuration.
interfaces:
- interface: enp0s1 # The interface name.
# Assigns static IP addresses to the interface.
addresses:
- 192.168.2.0/24
# A list of routes associated with the interface.
routes:
- network: 0.0.0.0/0 # The route's network (destination).
gateway: 192.168.2.1 # The route's gateway (if empty, creates link scope route).
metric: 1024 # The optional metric for the route.
mtu: 1500 # The interface's MTU.
# # Picks a network device using the selector.
# # select a device with bus prefix 00:*.
# deviceSelector:
# busPath: 00:* # PCI, USB bus prefix, supports matching by wildcard.
# # select a device with mac address matching `*:f0:ab` and `virtio` kernel driver.
# deviceSelector:
# hardwareAddr: '*:f0:ab' # Device hardware address, supports matching by wildcard.
# driver: virtio # Kernel driver, supports matching by wildcard.
# # select a device with bus prefix 00:*, a device with mac address matching `*:f0:ab` and `virtio` kernel driver.
# deviceSelector:
# - busPath: 00:* # PCI, USB bus prefix, supports matching by wildcard.
# - hardwareAddr: '*:f0:ab' # Device hardware address, supports matching by wildcard.
# driver: virtio # Kernel driver, supports matching by wildcard.
# # Bond specific options.
# bond:
# # The interfaces that make up the bond.
# interfaces:
# - enp2s0
# - enp2s1
# # Picks a network device using the selector.
# deviceSelectors:
# - busPath: 00:* # PCI, USB bus prefix, supports matching by wildcard.
# - hardwareAddr: '*:f0:ab' # Device hardware address, supports matching by wildcard.
# driver: virtio # Kernel driver, supports matching by wildcard.
# mode: 802.3ad # A bond option.
# lacpRate: fast # A bond option.
# # Bridge specific options.
# bridge:
# # The interfaces that make up the bridge.
# interfaces:
# - enxda4042ca9a51
# - enxae2a6774c259
# # A bridge option.
# stp:
# enabled: true # Whether Spanning Tree Protocol (STP) is enabled.
# # Indicates if DHCP should be used to configure the interface.
# dhcp: true
# # DHCP specific options.
# dhcpOptions:
# routeMetric: 1024 # The priority of all routes received via DHCP.
# # Wireguard specific configuration.
# # wireguard server example
# wireguard:
# privateKey: ABCDEF... # Specifies a private key configuration (base64 encoded).
# listenPort: 51111 # Specifies a device's listening port.
# # Specifies a list of peer configurations to apply to a device.
# peers:
# - publicKey: ABCDEF... # Specifies the public key of this peer.
# endpoint: 192.168.1.3 # Specifies the endpoint of this peer entry.
# # AllowedIPs specifies a list of allowed IP addresses in CIDR notation for this peer.
# allowedIPs:
# - 192.168.1.0/24
# # wireguard peer example
# wireguard:
# privateKey: ABCDEF... # Specifies a private key configuration (base64 encoded).
# # Specifies a list of peer configurations to apply to a device.
# peers:
# - publicKey: ABCDEF... # Specifies the public key of this peer.
# endpoint: 192.168.1.2:51822 # Specifies the endpoint of this peer entry.
# persistentKeepaliveInterval: 10s # Specifies the persistent keepalive interval for this peer.
# # AllowedIPs specifies a list of allowed IP addresses in CIDR notation for this peer.
# allowedIPs:
# - 192.168.1.0/24
# # Virtual (shared) IP address configuration.
# # layer2 vip example
# vip:
# ip: 172.16.199.55 # Specifies the IP address to be used.
# Used to statically set the nameservers for the machine.
nameservers:
- 9.8.7.6
- 8.7.6.5
# # Allows for extra entries to be added to the `/etc/hosts` file
# extraHostEntries:
# - ip: 192.168.1.100 # The IP of the host.
# # The host alias.
# aliases:
# - example
# - example.domain.tld
# # Configures KubeSpan feature.
# kubespan:
# enabled: true # Enable the KubeSpan feature.| Field | Type | Description | Value(s) |
|---|---|---|---|
hostname | string | Used to statically set the hostname for the machine. | |
interfaces | []Device |
By default all network interfaces will attempt a DHCP discovery. | |
nameservers | []string | Used to statically set the nameservers for the machine.Defaults to1.1.1.1 and 8.8.8.8Show example(s) | |
extraHostEntries | []ExtraHost | Allows for extra entries to be added to the /etc/hosts file Show example(s) | |
kubespan | NetworkKubeSpan | Configures KubeSpan feature. Show example(s) | |
disableSearchDomain | bool | Disable generating a default search domain in /etc/resolv.confbased on the machine hostname.Defaults to false. | trueyesfalseno |
interfaces[]
Device represents a network interface.
machine:
network:
interfaces:
- interface: enp0s1 # The interface name.
# Assigns static IP addresses to the interface.
addresses:
- 192.168.2.0/24
# A list of routes associated with the interface.
routes:
- network: 0.0.0.0/0 # The route's network (destination).
gateway: 192.168.2.1 # The route's gateway (if empty, creates link scope route).
metric: 1024 # The optional metric for the route.
mtu: 1500 # The interface's MTU.
# # Picks a network device using the selector.
# # select a device with bus prefix 00:*.
# deviceSelector:
# busPath: 00:* # PCI, USB bus prefix, supports matching by wildcard.
# # select a device with mac address matching `*:f0:ab` and `virtio` kernel driver.
# deviceSelector:
# hardwareAddr: '*:f0:ab' # Device hardware address, supports matching by wildcard.
# driver: virtio # Kernel driver, supports matching by wildcard.
# # select a device with bus prefix 00:*, a device with mac address matching `*:f0:ab` and `virtio` kernel driver.
# deviceSelector:
# - busPath: 00:* # PCI, USB bus prefix, supports matching by wildcard.
# - hardwareAddr: '*:f0:ab' # Device hardware address, supports matching by wildcard.
# driver: virtio # Kernel driver, supports matching by wildcard.
# # Bond specific options.
# bond:
# # The interfaces that make up the bond.
# interfaces:
# - enp2s0
# - enp2s1
# # Picks a network device using the selector.
# deviceSelectors:
# - busPath: 00:* # PCI, USB bus prefix, supports matching by wildcard.
# - hardwareAddr: '*:f0:ab' # Device hardware address, supports matching by wildcard.
# driver: virtio # Kernel driver, supports matching by wildcard.
# mode: 802.3ad # A bond option.
# lacpRate: fast # A bond option.
# # Bridge specific options.
# bridge:
# # The interfaces that make up the bridge.
# interfaces:
# - enxda4042ca9a51
# - enxae2a6774c259
# # A bridge option.
# stp:
# enabled: true # Whether Spanning Tree Protocol (STP) is enabled.
# # Indicates if DHCP should be used to configure the interface.
# dhcp: true
# # DHCP specific options.
# dhcpOptions:
# routeMetric: 1024 # The priority of all routes received via DHCP.
# # Wireguard specific configuration.
# # wireguard server example
# wireguard:
# privateKey: ABCDEF... # Specifies a private key configuration (base64 encoded).
# listenPort: 51111 # Specifies a device's listening port.
# # Specifies a list of peer configurations to apply to a device.
# peers:
# - publicKey: ABCDEF... # Specifies the public key of this peer.
# endpoint: 192.168.1.3 # Specifies the endpoint of this peer entry.
# # AllowedIPs specifies a list of allowed IP addresses in CIDR notation for this peer.
# allowedIPs:
# - 192.168.1.0/24
# # wireguard peer example
# wireguard:
# privateKey: ABCDEF... # Specifies a private key configuration (base64 encoded).
# # Specifies a list of peer configurations to apply to a device.
# peers:
# - publicKey: ABCDEF... # Specifies the public key of this peer.
# endpoint: 192.168.1.2:51822 # Specifies the endpoint of this peer entry.
# persistentKeepaliveInterval: 10s # Specifies the persistent keepalive interval for this peer.
# # AllowedIPs specifies a list of allowed IP addresses in CIDR notation for this peer.
# allowedIPs:
# - 192.168.1.0/24
# # Virtual (shared) IP address configuration.
# # layer2 vip example
# vip:
# ip: 172.16.199.55 # Specifies the IP address to be used.| Field | Type | Description | Value(s) |
|---|---|---|---|
interface | string | The interface name.Mutually exclusive withdeviceSelector.Show example(s) | |
deviceSelector | NetworkDeviceSelector | Picks a network device using the selector.Mutually exclusive withinterface.Supports partial match using wildcard syntax. Show example(s) | |
addresses | []string | Assigns static IP addresses to the interface.An address can be specified either in proper CIDR notation or as a standalone address (netmask of all ones is assumed).Show example(s) | |
routes | []Route | A list of routes associated with the interface.If used in combination with DHCP, these routes will be appended to routes returned by DHCP server.Show example(s) | |
bond | Bond | Bond specific options. Show example(s) | |
bridge | Bridge | Bridge specific options. Show example(s) | |
vlans | []Vlan | VLAN specific options. | |
mtu | int | The interface’s MTU.If used in combination with DHCP, this will override any MTU settings returned from DHCP server. | |
dhcp | bool | Indicates if DHCP should be used to configure the interface.The following DHCP options are supported:- OptionClasslessStaticRoute- OptionDomainNameServer- OptionDNSDomainSearchList- OptionHostNameShow example(s) | |
ignore | bool | Indicates if the interface should be ignored (skips configuration). | |
dummy | bool | Indicates if the interface is a dummy interface.dummy is used to specify that this interface should be a virtual-only, dummy interface. | |
dhcpOptions | DHCPOptions | DHCP specific options.dhcp must be set to true for these to take effect.Show example(s) | |
wireguard | DeviceWireguardConfig | Wireguard specific configuration.Includes things like private key, listen port, peers.Show example(s) | |
vip | DeviceVIPConfig | Virtual (shared) IP address configuration. Show example(s) |
deviceSelector
NetworkDeviceSelector struct describes network device selector.
machine:
network:
interfaces:
- deviceSelector:
busPath: 00:* # PCI, USB bus prefix, supports matching by wildcard.machine:
network:
interfaces:
- deviceSelector:
hardwareAddr: '*:f0:ab' # Device hardware address, supports matching by wildcard.
driver: virtio # Kernel driver, supports matching by wildcard.machine:
network:
interfaces:
- deviceSelector:
- busPath: 00:* # PCI, USB bus prefix, supports matching by wildcard.
- hardwareAddr: '*:f0:ab' # Device hardware address, supports matching by wildcard.
driver: virtio # Kernel driver, supports matching by wildcard.| Field | Type | Description | Value(s) |
|---|---|---|---|
busPath | string | PCI, USB bus prefix, supports matching by wildcard. | |
hardwareAddr | string | Device hardware address, supports matching by wildcard. | |
pciID | string | PCI ID (vendor ID, product ID), supports matching by wildcard. | |
driver | string | Kernel driver, supports matching by wildcard. | |
physical | bool | Select only physical devices. |
routes[]
Route represents a network route.
machine:
network:
interfaces:
- routes:
- network: 0.0.0.0/0 # The route's network (destination).
gateway: 10.5.0.1 # The route's gateway (if empty, creates link scope route).
- network: 10.2.0.0/16 # The route's network (destination).
gateway: 10.2.0.1 # The route's gateway (if empty, creates link scope route).| Field | Type | Description | Value(s) |
|---|---|---|---|
network | string | The route’s network (destination). | |
gateway | string | The route’s gateway (if empty, creates link scope route). | |
source | string | The route’s source address (optional). | |
metric | uint32 | The optional metric for the route. | |
mtu | uint32 | The optional MTU for the route. |
bond
Bond contains the various options for configuring a bonded interface.
machine:
network:
interfaces:
- bond:
# The interfaces that make up the bond.
interfaces:
- enp2s0
- enp2s1
mode: 802.3ad # A bond option.
lacpRate: fast # A bond option.
# # Picks a network device using the selector.
# # select a device with bus prefix 00:*, a device with mac address matching `*:f0:ab` and `virtio` kernel driver.
# deviceSelectors:
# - busPath: 00:* # PCI, USB bus prefix, supports matching by wildcard.
# - hardwareAddr: '*:f0:ab' # Device hardware address, supports matching by wildcard.
# driver: virtio # Kernel driver, supports matching by wildcard.| Field | Type | Description | Value(s) |
|---|---|---|---|
interfaces | []string | The interfaces that make up the bond. | |
deviceSelectors | []NetworkDeviceSelector | Picks a network device using the selector.Mutually exclusive withinterfaces.Supports partial match using wildcard syntax. Show example(s) | |
arpIPTarget | []string | A bond option.Please see the official kernel documentation.Not supported at the moment. | |
mode | string | A bond option.Please see the official kernel documentation. | |
xmitHashPolicy | string | A bond option.Please see the official kernel documentation. | |
lacpRate | string | A bond option.Please see the official kernel documentation. | |
adActorSystem | string | A bond option.Please see the official kernel documentation.Not supported at the moment. | |
arpValidate | string | A bond option.Please see the official kernel documentation. | |
arpAllTargets | string | A bond option.Please see the official kernel documentation. | |
primary | string | A bond option.Please see the official kernel documentation. | |
primaryReselect | string | A bond option.Please see the official kernel documentation. | |
failOverMac | string | A bond option.Please see the official kernel documentation. | |
adSelect | string | A bond option.Please see the official kernel documentation. | |
miimon | uint32 | A bond option.Please see the official kernel documentation. | |
updelay | uint32 | A bond option.Please see the official kernel documentation. | |
downdelay | uint32 | A bond option.Please see the official kernel documentation. | |
arpInterval | uint32 | A bond option.Please see the official kernel documentation. | |
resendIgmp | uint32 | A bond option.Please see the official kernel documentation. | |
minLinks | uint32 | A bond option.Please see the official kernel documentation. | |
lpInterval | uint32 | A bond option.Please see the official kernel documentation. | |
packetsPerSlave | uint32 | A bond option.Please see the official kernel documentation. | |
numPeerNotif | uint8 | A bond option.Please see the official kernel documentation. | |
tlbDynamicLb | uint8 | A bond option.Please see the official kernel documentation. | |
allSlavesActive | uint8 | A bond option.Please see the official kernel documentation. | |
useCarrier | bool | A bond option.Please see the official kernel documentation. | |
adActorSysPrio | uint16 | A bond option.Please see the official kernel documentation. | |
adUserPortKey | uint16 | A bond option.Please see the official kernel documentation. | |
peerNotifyDelay | uint32 | A bond option.Please see the official kernel documentation. |
deviceSelectors[]
NetworkDeviceSelector struct describes network device selector.
machine:
network:
interfaces:
- bond:
deviceSelectors:
busPath: 00:* # PCI, USB bus prefix, supports matching by wildcard.machine:
network:
interfaces:
- bond:
deviceSelectors:
hardwareAddr: '*:f0:ab' # Device hardware address, supports matching by wildcard.
driver: virtio # Kernel driver, supports matching by wildcard.machine:
network:
interfaces:
- bond:
deviceSelectors:
- busPath: 00:* # PCI, USB bus prefix, supports matching by wildcard.
- hardwareAddr: '*:f0:ab' # Device hardware address, supports matching by wildcard.
driver: virtio # Kernel driver, supports matching by wildcard.| Field | Type | Description | Value(s) |
|---|---|---|---|
busPath | string | PCI, USB bus prefix, supports matching by wildcard. | |
hardwareAddr | string | Device hardware address, supports matching by wildcard. | |
pciID | string | PCI ID (vendor ID, product ID), supports matching by wildcard. | |
driver | string | Kernel driver, supports matching by wildcard. | |
physical | bool | Select only physical devices. |
bridge
Bridge contains the various options for configuring a bridge interface.
machine:
network:
interfaces:
- bridge:
# The interfaces that make up the bridge.
interfaces:
- enxda4042ca9a51
- enxae2a6774c259
# A bridge option.
stp:
enabled: true # Whether Spanning Tree Protocol (STP) is enabled.| Field | Type | Description | Value(s) |
|---|---|---|---|
interfaces | []string | The interfaces that make up the bridge. | |
stp | STP | A bridge option.Please see the official kernel documentation. |
stp
STP contains the various options for configuring the STP properties of a bridge interface.
| Field | Type | Description | Value(s) |
|---|---|---|---|
enabled | bool | Whether Spanning Tree Protocol (STP) is enabled. |
vlans[]
Vlan represents vlan settings for a device.
| Field | Type | Description | Value(s) |
|---|---|---|---|
addresses | []string | The addresses in CIDR notation or as plain IPs to use. | |
routes | []Route | A list of routes associated with the VLAN. | |
dhcp | bool | Indicates if DHCP should be used. | |
vlanId | uint16 | The VLAN’s ID. | |
mtu | uint32 | The VLAN’s MTU. | |
vip | DeviceVIPConfig | The VLAN’s virtual IP address configuration. | |
dhcpOptions | DHCPOptions | DHCP specific options.dhcp must be set to true for these to take effect. |
routes[]
Route represents a network route.
machine:
network:
interfaces:
- vlans:
- routes:
- network: 0.0.0.0/0 # The route's network (destination).
gateway: 10.5.0.1 # The route's gateway (if empty, creates link scope route).
- network: 10.2.0.0/16 # The route's network (destination).
gateway: 10.2.0.1 # The route's gateway (if empty, creates link scope route).| Field | Type | Description | Value(s) |
|---|---|---|---|
network | string | The route’s network (destination). | |
gateway | string | The route’s gateway (if empty, creates link scope route). | |
source | string | The route’s source address (optional). | |
metric | uint32 | The optional metric for the route. | |
mtu | uint32 | The optional MTU for the route. |
vip
DeviceVIPConfig contains settings for configuring a Virtual Shared IP on an interface.
machine:
network:
interfaces:
- vlans:
- vip:
ip: 172.16.199.55 # Specifies the IP address to be used.| Field | Type | Description | Value(s) |
|---|---|---|---|
ip | string | Specifies the IP address to be used. | |
equinixMetal | VIPEquinixMetalConfig | Specifies the Equinix Metal API settings to assign VIP to the node. | |
hcloud | VIPHCloudConfig | Specifies the Hetzner Cloud API settings to assign VIP to the node. |
equinixMetal
VIPEquinixMetalConfig contains settings for Equinix Metal VIP management.
| Field | Type | Description | Value(s) |
|---|---|---|---|
apiToken | string | Specifies the Equinix Metal API Token. |
hcloud
VIPHCloudConfig contains settings for Hetzner Cloud VIP management.
| Field | Type | Description | Value(s) |
|---|---|---|---|
apiToken | string | Specifies the Hetzner Cloud API Token. |
dhcpOptions
DHCPOptions contains options for configuring the DHCP settings for a given interface.
machine:
network:
interfaces:
- vlans:
- dhcpOptions:
routeMetric: 1024 # The priority of all routes received via DHCP.| Field | Type | Description | Value(s) |
|---|---|---|---|
routeMetric | uint32 | The priority of all routes received via DHCP. | |
ipv4 | bool | Enables DHCPv4 protocol for the interface (default is enabled). | |
ipv6 | bool | Enables DHCPv6 protocol for the interface (default is disabled). | |
duidv6 | string | Set client DUID (hex string). |
dhcpOptions
DHCPOptions contains options for configuring the DHCP settings for a given interface.
machine:
network:
interfaces:
- dhcpOptions:
routeMetric: 1024 # The priority of all routes received via DHCP.| Field | Type | Description | Value(s) |
|---|---|---|---|
routeMetric | uint32 | The priority of all routes received via DHCP. | |
ipv4 | bool | Enables DHCPv4 protocol for the interface (default is enabled). | |
ipv6 | bool | Enables DHCPv6 protocol for the interface (default is disabled). | |
duidv6 | string | Set client DUID (hex string). |
wireguard
DeviceWireguardConfig contains settings for configuring Wireguard network interface.
machine:
network:
interfaces:
- wireguard:
privateKey: ABCDEF... # Specifies a private key configuration (base64 encoded).
listenPort: 51111 # Specifies a device's listening port.
# Specifies a list of peer configurations to apply to a device.
peers:
- publicKey: ABCDEF... # Specifies the public key of this peer.
endpoint: 192.168.1.3 # Specifies the endpoint of this peer entry.
# AllowedIPs specifies a list of allowed IP addresses in CIDR notation for this peer.
allowedIPs:
- 192.168.1.0/24machine:
network:
interfaces:
- wireguard:
privateKey: ABCDEF... # Specifies a private key configuration (base64 encoded).
# Specifies a list of peer configurations to apply to a device.
peers:
- publicKey: ABCDEF... # Specifies the public key of this peer.
endpoint: 192.168.1.2:51822 # Specifies the endpoint of this peer entry.
persistentKeepaliveInterval: 10s # Specifies the persistent keepalive interval for this peer.
# AllowedIPs specifies a list of allowed IP addresses in CIDR notation for this peer.
allowedIPs:
- 192.168.1.0/24| Field | Type | Description | Value(s) |
|---|---|---|---|
privateKey | string | Specifies a private key configuration (base64 encoded).Can be generated bywg genkey. | |
listenPort | int | Specifies a device’s listening port. | |
firewallMark | int | Specifies a device’s firewall mark. | |
peers | []DeviceWireguardPeer | Specifies a list of peer configurations to apply to a device. |
peers[]
DeviceWireguardPeer a WireGuard device peer configuration.
| Field | Type | Description | Value(s) |
|---|---|---|---|
publicKey | string | Specifies the public key of this peer.Can be extracted from private key by runningwg pubkey < private.key > public.key && cat public.key. | |
endpoint | string | Specifies the endpoint of this peer entry. | |
persistentKeepaliveInterval | Duration | Specifies the persistent keepalive interval for this peer.Field format accepts any Go time.Duration format (‘1h’ for one hour, ‘10m’ for ten minutes). | |
allowedIPs | []string | AllowedIPs specifies a list of allowed IP addresses in CIDR notation for this peer. |
vip
DeviceVIPConfig contains settings for configuring a Virtual Shared IP on an interface.
machine:
network:
interfaces:
- vip:
ip: 172.16.199.55 # Specifies the IP address to be used.| Field | Type | Description | Value(s) |
|---|---|---|---|
ip | string | Specifies the IP address to be used. | |
equinixMetal | VIPEquinixMetalConfig | Specifies the Equinix Metal API settings to assign VIP to the node. | |
hcloud | VIPHCloudConfig | Specifies the Hetzner Cloud API settings to assign VIP to the node. |
equinixMetal
VIPEquinixMetalConfig contains settings for Equinix Metal VIP management.
| Field | Type | Description | Value(s) |
|---|---|---|---|
apiToken | string | Specifies the Equinix Metal API Token. |
hcloud
VIPHCloudConfig contains settings for Hetzner Cloud VIP management.
| Field | Type | Description | Value(s) |
|---|---|---|---|
apiToken | string | Specifies the Hetzner Cloud API Token. |
extraHostEntries[]
ExtraHost represents a host entry in /etc/hosts.
machine:
network:
extraHostEntries:
- ip: 192.168.1.100 # The IP of the host.
# The host alias.
aliases:
- example
- example.domain.tld| Field | Type | Description | Value(s) |
|---|---|---|---|
ip | string | The IP of the host. | |
aliases | []string | The host alias. |
kubespan
NetworkKubeSpan struct describes KubeSpan configuration.
machine:
network:
kubespan:
enabled: true # Enable the KubeSpan feature.| Field | Type | Description | Value(s) |
|---|---|---|---|
enabled | bool | Enable the KubeSpan feature.Cluster discovery should be enabled with .cluster.discovery.enabled for KubeSpan to be enabled. | |
advertiseKubernetesNetworks | bool | Control whether Kubernetes pod CIDRs are announced over KubeSpan from the node.If disabled, CNI handles encapsulating pod-to-pod traffic into some node-to-node tunnel,and KubeSpan handles the node-to-node traffic. If enabled, KubeSpan will take over pod-to-pod traffic and send it over KubeSpan directly. When enabled, KubeSpan should have a way to detect complete pod CIDRs of the node which is not always the case with CNIs not relying on Kubernetes for IPAM. | |
allowDownPeerBypass | bool | Skip sending traffic via KubeSpan if the peer connection state is not up.This provides configurable choice between connectivity and security: either traffic is alwaysforced to go via KubeSpan (even if Wireguard peer connection is not up), or traffic can go directly to the peer if Wireguard connection can’t be established. | |
harvestExtraEndpoints | bool | KubeSpan can collect and publish extra endpoints for each member of the clusterbased on Wireguard endpoint information for each peer.This feature is disabled by default, don’t enable it with high number of peers (>50) in the KubeSpan network (performance issues). | |
mtu | uint32 | KubeSpan link MTU size.Default value is 1420. | |
filters | KubeSpanFilters | KubeSpan advanced filtering of network addresses .Settings in this section are optional, and settings apply only to the node. |
filters
KubeSpanFilters struct describes KubeSpan advanced network addresses filtering.
| Field | Type | Description | Value(s) |
|---|---|---|---|
endpoints | []string | Filter node addresses which will be advertised as KubeSpan endpoints for peer-to-peer Wireguard connections.By default, all addresses are advertised, and KubeSpan cycles through all endpoints until it finds one that works. Default value: no filtering. Show example(s) |
disks[]
MachineDisk represents the options available for partitioning, formatting, and mounting extra disks.
machine:
disks:
- device: /dev/sdb # The name of the disk to use.
# A list of partitions to create on the disk.
partitions:
- mountpoint: /var/mnt/extra # Where to mount the partition.
# # The size of partition: either bytes or human readable representation. If `size:` is omitted, the partition is sized to occupy the full disk.
# # Human readable representation.
# size: 100 MB
# # Precise value in bytes.
# size: 1073741824| Field | Type | Description | Value(s) |
|---|---|---|---|
device | string | The name of the disk to use. | |
partitions | []DiskPartition | A list of partitions to create on the disk. |
partitions[]
DiskPartition represents the options for a disk partition.
| Field | Type | Description | Value(s) |
|---|---|---|---|
size | DiskSize | The size of partition: either bytes or human readable representation. If size: is omitted, the partition is sized to occupy the full disk. Show example(s) | |
mountpoint | string | Where to mount the partition. |
install
InstallConfig represents the installation options for preparing a node.
machine:
install:
disk: /dev/sda # The disk used for installations.
# Allows for supplying extra kernel args via the bootloader.
extraKernelArgs:
- console=ttyS1
- panic=10
image: ghcr.io/siderolabs/installer:latest # Allows for supplying the image used to perform the installation.
wipe: false # Indicates if the installation disk should be wiped at installation time.
# # Look up disk using disk attributes like model, size, serial and others.
# diskSelector:
# size: 4GB # Disk size.
# model: WDC* # Disk model `/sys/block/<dev>/device/model`.
# busPath: /pci0000:00/0000:00:17.0/ata1/host0/target0:0:0/0:0:0:0 # Disk bus path.
# # Allows for supplying additional system extension images to install on top of base Talos image.
# extensions:
# - image: ghcr.io/siderolabs/gvisor:20220117.0-v1.0.0 # System extension image.| Field | Type | Description | Value(s) |
|---|---|---|---|
disk | string | The disk used for installations. Show example(s) | |
diskSelector | InstallDiskSelector | Look up disk using disk attributes like model, size, serial and others.Always has priority overdisk.Show example(s) | |
extraKernelArgs | []string | Allows for supplying extra kernel args via the bootloader.Existing kernel args can be removed by prefixing the argument with a-.For example -console removes all console=<value> arguments, whereas -console=tty0 removes the console=tty0 default argument.Show example(s) | |
image | string | Allows for supplying the image used to perform the installation.Image reference for each Talos release can be found onGitHub releases page. Show example(s) | |
extensions | []InstallExtensionConfig | Allows for supplying additional system extension images to install on top of base Talos image. Show example(s) | |
wipe | bool | Indicates if the installation disk should be wiped at installation time.Defaults totrue. | trueyesfalseno |
legacyBIOSSupport | bool | Indicates if MBR partition should be marked as bootable (active).Should be enabled only for the systems with legacy BIOS that doesn’t support GPT partitioning scheme. |
diskSelector
InstallDiskSelector represents a disk query parameters for the install disk lookup.
machine:
install:
diskSelector:
size: '>= 1TB' # Disk size.
model: WDC* # Disk model `/sys/block/<dev>/device/model`.
# # Disk bus path.
# busPath: /pci0000:00/0000:00:17.0/ata1/host0/target0:0:0/0:0:0:0
# busPath: /pci0000:00/*| Field | Type | Description | Value(s) |
|---|---|---|---|
size | InstallDiskSizeMatcher | Disk size. Show example(s) | |
name | string | Disk name /sys/block/<dev>/device/name. | |
model | string | Disk model /sys/block/<dev>/device/model. | |
serial | string | Disk serial number /sys/block/<dev>/serial. | |
modalias | string | Disk modalias /sys/block/<dev>/device/modalias. | |
uuid | string | Disk UUID /sys/block/<dev>/uuid. | |
wwid | string | Disk WWID /sys/block/<dev>/wwid. | |
type | InstallDiskType | Disk Type. | ssdhddnvmesd |
busPath | string | Disk bus path. Show example(s) |
extensions[]
InstallExtensionConfig represents a configuration for a system extension.
machine:
install:
extensions:
- image: ghcr.io/siderolabs/gvisor:20220117.0-v1.0.0 # System extension image.| Field | Type | Description | Value(s) |
|---|---|---|---|
image | string | System extension image. |
files[]
MachineFile represents a file to write to disk.
machine:
files:
- content: '...' # The contents of the file.
permissions: 0o666 # The file's permissions in octal.
path: /tmp/file.txt # The path of the file.
op: append # The operation to use| Field | Type | Description | Value(s) |
|---|---|---|---|
content | string | The contents of the file. | |
permissions | FileMode | The file’s permissions in octal. | |
path | string | The path of the file. | |
op | string | The operation to use | createappendoverwrite |
time
TimeConfig represents the options for configuring time on a machine.
machine:
time:
disabled: false # Indicates if the time service is disabled for the machine.
# description: |
servers:
- time.cloudflare.com
bootTimeout: 2m0s # Specifies the timeout when the node time is considered to be in sync unlocking the boot sequence.| Field | Type | Description | Value(s) |
|---|---|---|---|
disabled | bool | Indicates if the time service is disabled for the machine.Defaults tofalse. | |
servers | []string | description: | Specifies time (NTP) servers to use for setting the system time. Defaults to time.cloudflare.com.Talos can also sync to the PTP time source (e.g provided by the hypervisor), provide the path to the PTP device as “/dev/ptp0” or “/dev/ptp_kvm”. |
bootTimeout | Duration | Specifies the timeout when the node time is considered to be in sync unlocking the boot sequence.NTP sync will be still running in the background.Defaults to “infinity” (waiting forever for time sync) |
registries
RegistriesConfig represents the image pull options.
machine:
registries:
# Specifies mirror configuration for each registry host namespace.
mirrors:
docker.io:
# List of endpoints (URLs) for registry mirrors to use.
endpoints:
- https://registry.local
# Specifies TLS & auth configuration for HTTPS image registries.
config:
registry.local:
# The TLS configuration for the registry.
tls:
# Enable mutual TLS authentication with the registry.
clientIdentity:
crt: LS0tIEVYQU1QTEUgQ0VSVElGSUNBVEUgLS0t
key: LS0tIEVYQU1QTEUgS0VZIC0tLQ==
# The auth configuration for this registry.
auth:
username: username # Optional registry authentication.
password: password # Optional registry authentication.| Field | Type | Description | Value(s) |
|---|---|---|---|
mirrors | map[string]RegistryMirrorConfig | Specifies mirror configuration for each registry host namespace.This setting allows to configure local pull-through caching registires,air-gapped installations, etc. For example, when pulling an image with the reference example.com:123/image:v1,the example.com:123 key will be used to lookup the mirror configuration.Optionally the * key can be used to configure a fallback mirror.Registry name is the first segment of image identifier, with ‘docker.io’ being default one. Show example(s) | |
config | map[string]RegistryConfig | Specifies TLS & auth configuration for HTTPS image registries.Mutual TLS can be enabled with ‘clientIdentity’ option.The full hostname and port (if not using a default port 443) should be used as the key. The fallback key * can’t be used for TLS configuration.TLS configuration can be skipped if registry has trusted server certificate. Show example(s) |
mirrors.*
RegistryMirrorConfig represents mirror configuration for a registry.
machine:
registries:
mirrors:
ghcr.io:
# List of endpoints (URLs) for registry mirrors to use.
endpoints:
- https://registry.insecure
- https://ghcr.io/v2/| Field | Type | Description | Value(s) |
|---|---|---|---|
endpoints | []string | List of endpoints (URLs) for registry mirrors to use.Endpoint configures HTTP/HTTPS access mode, host name,port and path (if path is not set, it defaults to /v2). | |
overridePath | bool | Use the exact path specified for the endpoint (don’t append /v2/).This setting is often required for setting up multiple mirrorson a single instance of a registry. |
config.*
RegistryConfig specifies auth & TLS config per registry.
machine:
registries:
config:
registry.insecure:
# The TLS configuration for the registry.
tls:
insecureSkipVerify: true # Skip TLS server certificate verification (not recommended).
# # Enable mutual TLS authentication with the registry.
# clientIdentity:
# crt: LS0tIEVYQU1QTEUgQ0VSVElGSUNBVEUgLS0t
# key: LS0tIEVYQU1QTEUgS0VZIC0tLQ==
# # The auth configuration for this registry.
# auth:
# username: username # Optional registry authentication.
# password: password # Optional registry authentication.| Field | Type | Description | Value(s) |
|---|---|---|---|
tls | RegistryTLSConfig | The TLS configuration for the registry. Show example(s) | |
auth | RegistryAuthConfig | The auth configuration for this registry.Note: changes to the registry auth will not be picked up by the CRI containerd plugin without a reboot.Show example(s) |
tls
RegistryTLSConfig specifies TLS config for HTTPS registries.
machine:
registries:
config:
example.com:
tls:
# Enable mutual TLS authentication with the registry.
clientIdentity:
crt: LS0tIEVYQU1QTEUgQ0VSVElGSUNBVEUgLS0t
key: LS0tIEVYQU1QTEUgS0VZIC0tLQ==machine:
registries:
config:
example.com:
tls:
insecureSkipVerify: true # Skip TLS server certificate verification (not recommended).
# # Enable mutual TLS authentication with the registry.
# clientIdentity:
# crt: LS0tIEVYQU1QTEUgQ0VSVElGSUNBVEUgLS0t
# key: LS0tIEVYQU1QTEUgS0VZIC0tLQ==| Field | Type | Description | Value(s) |
|---|---|---|---|
clientIdentity | PEMEncodedCertificateAndKey | Enable mutual TLS authentication with the registry.Client certificate and key should be base64-encoded.Show example(s) | |
ca | Base64Bytes | CA registry certificate to add the list of trusted certificates.Certificate should be base64-encoded. | |
insecureSkipVerify | bool | Skip TLS server certificate verification (not recommended). |
auth
RegistryAuthConfig specifies authentication configuration for a registry.
machine:
registries:
config:
example.com:
auth:
username: username # Optional registry authentication.
password: password # Optional registry authentication.| Field | Type | Description | Value(s) |
|---|---|---|---|
username | string | Optional registry authentication.The meaning of each field is the same with the corresponding field in.docker/config.json. | |
password | string | Optional registry authentication.The meaning of each field is the same with the corresponding field in.docker/config.json. | |
auth | string | Optional registry authentication.The meaning of each field is the same with the corresponding field in.docker/config.json. | |
identityToken | string | Optional registry authentication.The meaning of each field is the same with the corresponding field in.docker/config.json. |
systemDiskEncryption
SystemDiskEncryptionConfig specifies system disk partitions encryption settings.
machine:
systemDiskEncryption:
# Ephemeral partition encryption.
ephemeral:
provider: luks2 # Encryption provider to use for the encryption.
# Defines the encryption keys generation and storage method.
keys:
- # Deterministically generated key from the node UUID and PartitionLabel.
nodeID: {}
slot: 0 # Key slot number for LUKS2 encryption.
# # KMS managed encryption key.
# kms:
# endpoint: https://192.168.88.21:4443 # KMS endpoint to Seal/Unseal the key.
# # Cipher kind to use for the encryption. Depends on the encryption provider.
# cipher: aes-xts-plain64
# # Defines the encryption sector size.
# blockSize: 4096
# # Additional --perf parameters for the LUKS2 encryption.
# options:
# - no_read_workqueue
# - no_write_workqueue| Field | Type | Description | Value(s) |
|---|---|---|---|
state | EncryptionConfig | State partition encryption. | |
ephemeral | EncryptionConfig | Ephemeral partition encryption. |
state
EncryptionConfig represents partition encryption settings.
| Field | Type | Description | Value(s) |
|---|---|---|---|
provider | string | Encryption provider to use for the encryption. Show example(s) | |
keys | []EncryptionKey | Defines the encryption keys generation and storage method. | |
cipher | string | Cipher kind to use for the encryption. Depends on the encryption provider. Show example(s) | aes-xts-plain64xchacha12,aes-adiantum-plain64xchacha20,aes-adiantum-plain64 |
keySize | uint | Defines the encryption key length. | |
blockSize | uint64 | Defines the encryption sector size. Show example(s) | |
options | []string | Additional –perf parameters for the LUKS2 encryption. Show example(s) | no_read_workqueueno_write_workqueuesame_cpu_crypt |
keys[]
EncryptionKey represents configuration for disk encryption key.
| Field | Type | Description | Value(s) |
|---|---|---|---|
static | EncryptionKeyStatic | Key which value is stored in the configuration file. | |
nodeID | EncryptionKeyNodeID | Deterministically generated key from the node UUID and PartitionLabel. | |
kms | EncryptionKeyKMS | KMS managed encryption key. Show example(s) | |
slot | int | Key slot number for LUKS2 encryption. | |
tpm | EncryptionKeyTPM | Enable TPM based disk encryption. |
static
EncryptionKeyStatic represents throw away key type.
| Field | Type | Description | Value(s) |
|---|---|---|---|
passphrase | string | Defines the static passphrase value. |
nodeID
EncryptionKeyNodeID represents deterministically generated key from the node UUID and PartitionLabel.
kms
EncryptionKeyKMS represents a key that is generated and then sealed/unsealed by the KMS server.
machine:
systemDiskEncryption:
state:
keys:
- kms:
endpoint: https://192.168.88.21:4443 # KMS endpoint to Seal/Unseal the key.| Field | Type | Description | Value(s) |
|---|---|---|---|
endpoint | string | KMS endpoint to Seal/Unseal the key. |
tpm
EncryptionKeyTPM represents a key that is generated and then sealed/unsealed by the TPM.
ephemeral
EncryptionConfig represents partition encryption settings.
| Field | Type | Description | Value(s) |
|---|---|---|---|
provider | string | Encryption provider to use for the encryption. Show example(s) | |
keys | []EncryptionKey | Defines the encryption keys generation and storage method. | |
cipher | string | Cipher kind to use for the encryption. Depends on the encryption provider. Show example(s) | aes-xts-plain64xchacha12,aes-adiantum-plain64xchacha20,aes-adiantum-plain64 |
keySize | uint | Defines the encryption key length. | |
blockSize | uint64 | Defines the encryption sector size. Show example(s) | |
options | []string | Additional –perf parameters for the LUKS2 encryption. Show example(s) | no_read_workqueueno_write_workqueuesame_cpu_crypt |
keys[]
EncryptionKey represents configuration for disk encryption key.
| Field | Type | Description | Value(s) |
|---|---|---|---|
static | EncryptionKeyStatic | Key which value is stored in the configuration file. | |
nodeID | EncryptionKeyNodeID | Deterministically generated key from the node UUID and PartitionLabel. | |
kms | EncryptionKeyKMS | KMS managed encryption key. Show example(s) | |
slot | int | Key slot number for LUKS2 encryption. | |
tpm | EncryptionKeyTPM | Enable TPM based disk encryption. |
static
EncryptionKeyStatic represents throw away key type.
| Field | Type | Description | Value(s) |
|---|---|---|---|
passphrase | string | Defines the static passphrase value. |
nodeID
EncryptionKeyNodeID represents deterministically generated key from the node UUID and PartitionLabel.
kms
EncryptionKeyKMS represents a key that is generated and then sealed/unsealed by the KMS server.
machine:
systemDiskEncryption:
ephemeral:
keys:
- kms:
endpoint: https://192.168.88.21:4443 # KMS endpoint to Seal/Unseal the key.| Field | Type | Description | Value(s) |
|---|---|---|---|
endpoint | string | KMS endpoint to Seal/Unseal the key. |
tpm
EncryptionKeyTPM represents a key that is generated and then sealed/unsealed by the TPM.
features
FeaturesConfig describes individual Talos features that can be switched on or off.
machine:
features:
rbac: true # Enable role-based access control (RBAC).
# # Configure Talos API access from Kubernetes pods.
# kubernetesTalosAPIAccess:
# enabled: true # Enable Talos API access from Kubernetes pods.
# # The list of Talos API roles which can be granted for access from Kubernetes pods.
# allowedRoles:
# - os:reader
# # The list of Kubernetes namespaces Talos API access is available from.
# allowedKubernetesNamespaces:
# - kube-system| Field | Type | Description | Value(s) |
|---|---|---|---|
rbac | bool | Enable role-based access control (RBAC). | |
stableHostname | bool | Enable stable default hostname. | |
kubernetesTalosAPIAccess | KubernetesTalosAPIAccessConfig | Configure Talos API access from Kubernetes pods.This feature is disabled if the feature config is not specified. Show example(s) | |
apidCheckExtKeyUsage | bool | Enable checks for extended key usage of client certificates in apid. | |
diskQuotaSupport | bool | Enable XFS project quota support for EPHEMERAL partition and user disks.Also enables kubelet tracking of ephemeral disk usage in the kubelet via quota. | |
kubePrism | KubePrism | KubePrism - local proxy/load balancer on defined port that will distributerequests to all API servers in the cluster. | |
hostDNS | HostDNSConfig | Configures host DNS caching resolver. |
kubernetesTalosAPIAccess
KubernetesTalosAPIAccessConfig describes the configuration for the Talos API access from Kubernetes pods.
machine:
features:
kubernetesTalosAPIAccess:
enabled: true # Enable Talos API access from Kubernetes pods.
# The list of Talos API roles which can be granted for access from Kubernetes pods.
allowedRoles:
- os:reader
# The list of Kubernetes namespaces Talos API access is available from.
allowedKubernetesNamespaces:
- kube-system| Field | Type | Description | Value(s) |
|---|---|---|---|
enabled | bool | Enable Talos API access from Kubernetes pods. | |
allowedRoles | []string | The list of Talos API roles which can be granted for access from Kubernetes pods.Empty list means that no roles can be granted, so access is blocked. | |
allowedKubernetesNamespaces | []string | The list of Kubernetes namespaces Talos API access is available from. |
kubePrism
KubePrism describes the configuration for the KubePrism load balancer.
| Field | Type | Description | Value(s) |
|---|---|---|---|
enabled | bool | Enable KubePrism support - will start local load balancing proxy. | |
port | int | KubePrism port. |
hostDNS
HostDNSConfig describes the configuration for the host DNS resolver.
| Field | Type | Description | Value(s) |
|---|---|---|---|
enabled | bool | Enable host DNS caching resolver. | |
forwardKubeDNSToHost | bool | Use the host DNS resolver as upstream for Kubernetes CoreDNS pods.When enabled, CoreDNS pods use host DNS server as the upstream DNS (instead of using configured upstream DNS resolvers directly). | |
resolveMemberNames | bool | Resolve member hostnames using the host DNS resolver.When enabled, cluster member hostnames and node names are resolved using the host DNS resolver. This requires service discovery to be enabled. |
udev
UdevConfig describes how the udev system should be configured.
machine:
udev:
# List of udev rules to apply to the udev system
rules:
- SUBSYSTEM=="drm", KERNEL=="renderD*", GROUP="44", MODE="0660"| Field | Type | Description | Value(s) |
|---|---|---|---|
rules | []string | List of udev rules to apply to the udev system |
logging
LoggingConfig struct configures Talos logging.
machine:
logging:
# Logging destination.
destinations:
- endpoint: tcp://1.2.3.4:12345 # Where to send logs. Supported protocols are "tcp" and "udp".
format: json_lines # Logs format.| Field | Type | Description | Value(s) |
|---|---|---|---|
destinations | []LoggingDestination | Logging destination. |
destinations[]
LoggingDestination struct configures Talos logging destination.
| Field | Type | Description | Value(s) |
|---|---|---|---|
endpoint | Endpoint | Where to send logs. Supported protocols are “tcp” and “udp”. Show example(s) | |
format | string | Logs format. | json_lines |
extraTags | map[string]string | Extra tags (key-value) pairs to attach to every log message sent. |
endpoint
Endpoint represents the endpoint URL parsed out of the machine config.
machine:
logging:
destinations:
- endpoint: https://1.2.3.4:6443machine:
logging:
destinations:
- endpoint: https://cluster1.internal:6443machine:
logging:
destinations:
- endpoint: udp://127.0.0.1:12345machine:
logging:
destinations:
- endpoint: tcp://1.2.3.4:12345| Field | Type | Description | Value(s) |
|---|
kernel
KernelConfig struct configures Talos Linux kernel.
machine:
kernel:
# Kernel modules to load.
modules:
- name: brtfs # Module name.| Field | Type | Description | Value(s) |
|---|---|---|---|
modules | []KernelModuleConfig | Kernel modules to load. |
modules[]
KernelModuleConfig struct configures Linux kernel modules to load.
| Field | Type | Description | Value(s) |
|---|---|---|---|
name | string | Module name. | |
parameters | []string | Module parameters, changes applied after reboot. |
seccompProfiles[]
MachineSeccompProfile defines seccomp profiles for the machine.
machine:
seccompProfiles:
- name: audit.json # The `name` field is used to provide the file name of the seccomp profile.
# The `value` field is used to provide the seccomp profile.
value:
defaultAction: SCMP_ACT_LOG| Field | Type | Description | Value(s) |
|---|---|---|---|
name | string | The name field is used to provide the file name of the seccomp profile. | |
value | Unstructured | The value field is used to provide the seccomp profile. |
cluster
ClusterConfig represents the cluster-wide config values.
cluster:
# ControlPlaneConfig represents the control plane configuration options.
controlPlane:
endpoint: https://1.2.3.4 # Endpoint is the canonical controlplane endpoint, which can be an IP address or a DNS hostname.
localAPIServerPort: 443 # The port that the API server listens on internally.
clusterName: talos.local
# ClusterNetworkConfig represents kube networking configuration options.
network:
# The CNI used.
cni:
name: flannel # Name of CNI to use.
dnsDomain: cluster.local # The domain used by Kubernetes DNS.
# The pod subnet CIDR.
podSubnets:
- 10.244.0.0/16
# The service subnet CIDR.
serviceSubnets:
- 10.96.0.0/12| Field | Type | Description | Value(s) |
|---|---|---|---|
id | string | Globally unique identifier for this cluster (base64 encoded random 32 bytes). | |
secret | string | Shared secret of cluster (base64 encoded random 32 bytes).This secret is shared among cluster members but should never be sent over the network. | |
controlPlane | ControlPlaneConfig | Provides control plane specific configuration options. Show example(s) | |
clusterName | string | Configures the cluster’s name. | |
network | ClusterNetworkConfig | Provides cluster specific network configuration options. Show example(s) | |
token | string | The bootstrap token used to join the cluster. Show example(s) | |
aescbcEncryptionSecret | string | A key used for the encryption of secret data at rest.Enables encryption with AESCBC.Show example(s) | |
secretboxEncryptionSecret | string | A key used for the encryption of secret data at rest.Enables encryption with secretbox.Secretbox has precedence over AESCBC. Show example(s) | |
ca | PEMEncodedCertificateAndKey | The base64 encoded root certificate authority used by Kubernetes. Show example(s) | |
acceptedCAs | []PEMEncodedCertificate | The list of base64 encoded accepted certificate authorities used by Kubernetes. | |
aggregatorCA | PEMEncodedCertificateAndKey | The base64 encoded aggregator certificate authority used by Kubernetes for front-proxy certificate generation.This CA can be self-signed. Show example(s) | |
serviceAccount | PEMEncodedKey | The base64 encoded private key for service account token generation. Show example(s) | |
apiServer | APIServerConfig | API server specific configuration options. Show example(s) | |
controllerManager | ControllerManagerConfig | Controller manager server specific configuration options. Show example(s) | |
proxy | ProxyConfig | Kube-proxy server-specific configuration options Show example(s) | |
scheduler | SchedulerConfig | Scheduler server specific configuration options. Show example(s) | |
discovery | ClusterDiscoveryConfig | Configures cluster member discovery. Show example(s) | |
etcd | EtcdConfig | Etcd specific configuration options. Show example(s) | |
coreDNS | CoreDNS | Core DNS specific configuration options. Show example(s) | |
externalCloudProvider | ExternalCloudProviderConfig | External cloud provider configuration. Show example(s) | |
extraManifests | []string | A list of urls that point to additional manifests.These will get automatically deployed as part of the bootstrap.Show example(s) | |
extraManifestHeaders | map[string]string | A map of key value pairs that will be added while fetching the extraManifests. Show example(s) | |
inlineManifests | []ClusterInlineManifest | A list of inline Kubernetes manifests.These will get automatically deployed as part of the bootstrap.Show example(s) | |
adminKubeconfig | AdminKubeconfigConfig | Settings for admin kubeconfig generation.Certificate lifetime can be configured.Show example(s) | |
allowSchedulingOnControlPlanes | bool | Allows running workload on control-plane nodes. Show example(s) | trueyesfalseno |
controlPlane
ControlPlaneConfig represents the control plane configuration options.
cluster:
controlPlane:
endpoint: https://1.2.3.4 # Endpoint is the canonical controlplane endpoint, which can be an IP address or a DNS hostname.
localAPIServerPort: 443 # The port that the API server listens on internally.| Field | Type | Description | Value(s) |
|---|---|---|---|
endpoint | Endpoint | Endpoint is the canonical controlplane endpoint, which can be an IP address or a DNS hostname.It is single-valued, and may optionally include a port number.Show example(s) | |
localAPIServerPort | int | The port that the API server listens on internally.This may be different than the port portion listed in the endpoint field above.The default is 6443. |
endpoint
Endpoint represents the endpoint URL parsed out of the machine config.
cluster:
controlPlane:
endpoint: https://1.2.3.4:6443cluster:
controlPlane:
endpoint: https://cluster1.internal:6443cluster:
controlPlane:
endpoint: udp://127.0.0.1:12345cluster:
controlPlane:
endpoint: tcp://1.2.3.4:12345| Field | Type | Description | Value(s) |
|---|
network
ClusterNetworkConfig represents kube networking configuration options.
cluster:
network:
# The CNI used.
cni:
name: flannel # Name of CNI to use.
dnsDomain: cluster.local # The domain used by Kubernetes DNS.
# The pod subnet CIDR.
podSubnets:
- 10.244.0.0/16
# The service subnet CIDR.
serviceSubnets:
- 10.96.0.0/12| Field | Type | Description | Value(s) |
|---|---|---|---|
cni | CNIConfig | The CNI used.Composed of “name” and “urls”.The “name” key supports the following options: “flannel”, “custom”, and “none”. “flannel” uses Talos-managed Flannel CNI, and that’s the default option. “custom” uses custom manifests that should be provided in “urls”. “none” indicates that Talos will not manage any CNI installation. Show example(s) | |
dnsDomain | string | The domain used by Kubernetes DNS.The default iscluster.localShow example(s) | |
podSubnets | []string | The pod subnet CIDR. Show example(s) | |
serviceSubnets | []string | The service subnet CIDR. Show example(s) |
cni
CNIConfig represents the CNI configuration options.
cluster:
network:
cni:
name: custom # Name of CNI to use.
# URLs containing manifests to apply for the CNI.
urls:
- https://docs.projectcalico.org/archive/v3.20/manifests/canal.yaml| Field | Type | Description | Value(s) |
|---|---|---|---|
name | string | Name of CNI to use. | flannelcustomnone |
urls | []string | URLs containing manifests to apply for the CNI.Should be present for “custom”, must be empty for “flannel” and “none”. | |
flannel | FlannelCNIConfig | description: | Flannel configuration options. |
flannel
FlannelCNIConfig represents the Flannel CNI configuration options.
| Field | Type | Description | Value(s) |
|---|---|---|---|
extraArgs | []string | Extra arguments for ‘flanneld’. Show example(s) |
apiServer
APIServerConfig represents the kube apiserver configuration options.
cluster:
apiServer:
image: registry.k8s.io/kube-apiserver:v1.30.0 # The container image used in the API server manifest.
# Extra arguments to supply to the API server.
extraArgs:
feature-gates: ServerSideApply=true
http2-max-streams-per-connection: "32"
# Extra certificate subject alternative names for the API server's certificate.
certSANs:
- 1.2.3.4
- 4.5.6.7
# # Configure the API server admission plugins.
# admissionControl:
# - name: PodSecurity # Name is the name of the admission controller.
# # Configuration is an embedded configuration object to be used as the plugin's
# configuration:
# apiVersion: pod-security.admission.config.k8s.io/v1alpha1
# defaults:
# audit: restricted
# audit-version: latest
# enforce: baseline
# enforce-version: latest
# warn: restricted
# warn-version: latest
# exemptions:
# namespaces:
# - kube-system
# runtimeClasses: []
# usernames: []
# kind: PodSecurityConfiguration
# # Configure the API server audit policy.
# auditPolicy:
# apiVersion: audit.k8s.io/v1
# kind: Policy
# rules:
# - level: Metadata| Field | Type | Description | Value(s) |
|---|---|---|---|
image | string | The container image used in the API server manifest. Show example(s) | |
extraArgs | map[string]string | Extra arguments to supply to the API server. | |
extraVolumes | []VolumeMountConfig | Extra volumes to mount to the API server static pod. | |
env | Env | The env field allows for the addition of environment variables for the control plane component. | |
certSANs | []string | Extra certificate subject alternative names for the API server’s certificate. | |
disablePodSecurityPolicy | bool | Disable PodSecurityPolicy in the API server and default manifests. | |
admissionControl | []AdmissionPluginConfig | Configure the API server admission plugins. Show example(s) | |
auditPolicy | Unstructured | Configure the API server audit policy. Show example(s) | |
resources | ResourcesConfig | Configure the API server resources. |
extraVolumes[]
VolumeMountConfig struct describes extra volume mount for the static pods.
| Field | Type | Description | Value(s) |
|---|---|---|---|
hostPath | string | Path on the host. Show example(s) | |
mountPath | string | Path in the container. Show example(s) | |
readonly | bool | Mount the volume read only. Show example(s) |
admissionControl[]
AdmissionPluginConfig represents the API server admission plugin configuration.
cluster:
apiServer:
admissionControl:
- name: PodSecurity # Name is the name of the admission controller.
# Configuration is an embedded configuration object to be used as the plugin's
configuration:
apiVersion: pod-security.admission.config.k8s.io/v1alpha1
defaults:
audit: restricted
audit-version: latest
enforce: baseline
enforce-version: latest
warn: restricted
warn-version: latest
exemptions:
namespaces:
- kube-system
runtimeClasses: []
usernames: []
kind: PodSecurityConfiguration| Field | Type | Description | Value(s) |
|---|---|---|---|
name | string | Name is the name of the admission controller.It must match the registered admission plugin name. | |
configuration | Unstructured | Configuration is an embedded configuration object to be used as the plugin’sconfiguration. |
resources
ResourcesConfig represents the pod resources.
| Field | Type | Description | Value(s) |
|---|---|---|---|
requests | Unstructured | Requests configures the reserved cpu/memory resources. Show example(s) | |
limits | Unstructured | Limits configures the maximum cpu/memory resources a container can use. Show example(s) |
controllerManager
ControllerManagerConfig represents the kube controller manager configuration options.
cluster:
controllerManager:
image: registry.k8s.io/kube-controller-manager:v1.30.0 # The container image used in the controller manager manifest.
# Extra arguments to supply to the controller manager.
extraArgs:
feature-gates: ServerSideApply=true| Field | Type | Description | Value(s) |
|---|---|---|---|
image | string | The container image used in the controller manager manifest. Show example(s) | |
extraArgs | map[string]string | Extra arguments to supply to the controller manager. | |
extraVolumes | []VolumeMountConfig | Extra volumes to mount to the controller manager static pod. | |
env | Env | The env field allows for the addition of environment variables for the control plane component. | |
resources | ResourcesConfig | Configure the controller manager resources. |
extraVolumes[]
VolumeMountConfig struct describes extra volume mount for the static pods.
| Field | Type | Description | Value(s) |
|---|---|---|---|
hostPath | string | Path on the host. Show example(s) | |
mountPath | string | Path in the container. Show example(s) | |
readonly | bool | Mount the volume read only. Show example(s) |
resources
ResourcesConfig represents the pod resources.
| Field | Type | Description | Value(s) |
|---|---|---|---|
requests | Unstructured | Requests configures the reserved cpu/memory resources. Show example(s) | |
limits | Unstructured | Limits configures the maximum cpu/memory resources a container can use. Show example(s) |
proxy
ProxyConfig represents the kube proxy configuration options.
cluster:
proxy:
image: registry.k8s.io/kube-proxy:v1.30.0 # The container image used in the kube-proxy manifest.
mode: ipvs # proxy mode of kube-proxy.
# Extra arguments to supply to kube-proxy.
extraArgs:
proxy-mode: iptables
# # Disable kube-proxy deployment on cluster bootstrap.
# disabled: false| Field | Type | Description | Value(s) |
|---|---|---|---|
disabled | bool | Disable kube-proxy deployment on cluster bootstrap. Show example(s) | |
image | string | The container image used in the kube-proxy manifest. Show example(s) | |
mode | string | proxy mode of kube-proxy.The default is ‘iptables’. | |
extraArgs | map[string]string | Extra arguments to supply to kube-proxy. |
scheduler
SchedulerConfig represents the kube scheduler configuration options.
cluster:
scheduler:
image: registry.k8s.io/kube-scheduler:v1.30.0 # The container image used in the scheduler manifest.
# Extra arguments to supply to the scheduler.
extraArgs:
feature-gates: AllBeta=true| Field | Type | Description | Value(s) |
|---|---|---|---|
image | string | The container image used in the scheduler manifest. Show example(s) | |
extraArgs | map[string]string | Extra arguments to supply to the scheduler. | |
extraVolumes | []VolumeMountConfig | Extra volumes to mount to the scheduler static pod. | |
env | Env | The env field allows for the addition of environment variables for the control plane component. | |
resources | ResourcesConfig | Configure the scheduler resources. | |
config | Unstructured | Specify custom kube-scheduler configuration. |
extraVolumes[]
VolumeMountConfig struct describes extra volume mount for the static pods.
| Field | Type | Description | Value(s) |
|---|---|---|---|
hostPath | string | Path on the host. Show example(s) | |
mountPath | string | Path in the container. Show example(s) | |
readonly | bool | Mount the volume read only. Show example(s) |
resources
ResourcesConfig represents the pod resources.
| Field | Type | Description | Value(s) |
|---|---|---|---|
requests | Unstructured | Requests configures the reserved cpu/memory resources. Show example(s) | |
limits | Unstructured | Limits configures the maximum cpu/memory resources a container can use. Show example(s) |
discovery
ClusterDiscoveryConfig struct configures cluster membership discovery.
cluster:
discovery:
enabled: true # Enable the cluster membership discovery feature.
# Configure registries used for cluster member discovery.
registries:
# Kubernetes registry uses Kubernetes API server to discover cluster members and stores additional information
kubernetes: {}
# Service registry is using an external service to push and pull information about cluster members.
service:
endpoint: https://discovery.talos.dev/ # External service endpoint.| Field | Type | Description | Value(s) |
|---|---|---|---|
enabled | bool | Enable the cluster membership discovery feature.Cluster discovery is based on individual registries which are configured under the registries field. | |
registries | DiscoveryRegistriesConfig | Configure registries used for cluster member discovery. |
registries
DiscoveryRegistriesConfig struct configures cluster membership discovery.
| Field | Type | Description | Value(s) |
|---|---|---|---|
kubernetes | RegistryKubernetesConfig | Kubernetes registry uses Kubernetes API server to discover cluster members and stores additional informationas annotations on the Node resources. | |
service | RegistryServiceConfig | Service registry is using an external service to push and pull information about cluster members. |
kubernetes
RegistryKubernetesConfig struct configures Kubernetes discovery registry.
| Field | Type | Description | Value(s) |
|---|---|---|---|
disabled | bool | Disable Kubernetes discovery registry. |
service
RegistryServiceConfig struct configures Kubernetes discovery registry.
| Field | Type | Description | Value(s) |
|---|---|---|---|
disabled | bool | Disable external service discovery registry. | |
endpoint | string | External service endpoint. Show example(s) |
etcd
EtcdConfig represents the etcd configuration options.
cluster:
etcd:
image: gcr.io/etcd-development/etcd:v3.5.13 # The container image used to create the etcd service.
# The `ca` is the root certificate authority of the PKI.
ca:
crt: LS0tIEVYQU1QTEUgQ0VSVElGSUNBVEUgLS0t
key: LS0tIEVYQU1QTEUgS0VZIC0tLQ==
# Extra arguments to supply to etcd.
extraArgs:
election-timeout: "5000"
# # The `advertisedSubnets` field configures the networks to pick etcd advertised IP from.
# advertisedSubnets:
# - 10.0.0.0/8| Field | Type | Description | Value(s) |
|---|---|---|---|
image | string | The container image used to create the etcd service. Show example(s) | |
ca | PEMEncodedCertificateAndKey | The It is composed of a base64 encoded | |
extraArgs | map[string]string | Extra arguments to supply to etcd.Note that the following args are not allowed:- name- data-dir- initial-cluster-state- listen-peer-urls- listen-client-urls- cert-file- key-file- trusted-ca-file- peer-client-cert-auth- peer-cert-file- peer-trusted-ca-file- peer-key-file | |
advertisedSubnets | []string | The | |
listenSubnets | []string | The |
coreDNS
CoreDNS represents the CoreDNS config values.
cluster:
coreDNS:
image: registry.k8s.io/coredns/coredns:v1.11.1 # The `image` field is an override to the default coredns image.| Field | Type | Description | Value(s) |
|---|---|---|---|
disabled | bool | Disable coredns deployment on cluster bootstrap. | |
image | string | The image field is an override to the default coredns image. |
externalCloudProvider
ExternalCloudProviderConfig contains external cloud provider configuration.
cluster:
externalCloudProvider:
enabled: true # Enable external cloud provider.
# A list of urls that point to additional manifests for an external cloud provider.
manifests:
- https://raw.githubusercontent.com/kubernetes/cloud-provider-aws/v1.20.0-alpha.0/manifests/rbac.yaml
- https://raw.githubusercontent.com/kubernetes/cloud-provider-aws/v1.20.0-alpha.0/manifests/aws-cloud-controller-manager-daemonset.yaml| Field | Type | Description | Value(s) |
|---|---|---|---|
enabled | bool | Enable external cloud provider. | trueyesfalseno |
manifests | []string | A list of urls that point to additional manifests for an external cloud provider.These will get automatically deployed as part of the bootstrap.Show example(s) |
inlineManifests[]
ClusterInlineManifest struct describes inline bootstrap manifests for the user.
cluster:
inlineManifests:
- name: namespace-ci # Name of the manifest.
contents: |- # Manifest contents as a string.
apiVersion: v1
kind: Namespace
metadata:
name: ci| Field | Type | Description | Value(s) |
|---|---|---|---|
name | string | Name of the manifest.Name should be unique.Show example(s) | |
contents | string | Manifest contents as a string. Show example(s) |
adminKubeconfig
AdminKubeconfigConfig contains admin kubeconfig settings.
cluster:
adminKubeconfig:
certLifetime: 1h0m0s # Admin kubeconfig certificate lifetime (default is 1 year).| Field | Type | Description | Value(s) |
|---|---|---|---|
certLifetime | Duration | Admin kubeconfig certificate lifetime (default is 1 year).Field format accepts any Go time.Duration format (‘1h’ for one hour, ‘10m’ for ten minutes). |