This is the multi-page printable view of this section. Click here to print.

Return to the regular view of this page.

Configuration

Guides on how to configure Talos Linux machines

1 - Configuration Patches

In this guide, we’ll patch the generated machine configuration.

Talos generates machine configuration for two types of machines: controlplane and worker machines. Many configuration options can be adjusted using talosctl gen config but not all of them. Configuration patching allows modifying machine configuration to fit it for the cluster or a specific machine.

Configuration Patch Formats

Talos supports two configuration patch formats:

  • strategic merge patches
  • RFC6902 (JSON patches)

Strategic merge patches are the easiest to use, but JSON patches allow more precise configuration adjustments.

Strategic Merge patches

Strategic merge patches look like incomplete machine configuration files:

machine:
  network:
    hostname: worker1

When applied to the machine configuration, the patch gets merged with the respective section of the machine configuration:

machine:
  network:
    interfaces:
      - interface: eth0
        addresses:
          - 10.0.0.2/24
    hostname: worker1

In general, machine configuration contents are merged with the contents of the strategic merge patch, with strategic merge patch values overriding machine configuration values. There are some special rules:

  • If the field value is a list, the patch value is appended to the list, with the following exceptions:
    • values of the fields cluster.network.podSubnets and cluster.network.serviceSubnets are overwritten on merge
    • network.interfaces section is merged with the value in the machine config if there is a match on interface: or deviceSelector: keys

RFC6902 (JSON Patches)

JSON patches can be written either in JSON or YAML format. A proper JSON patch requires an op field that depends on the machine configuration contents: whether the path already exists or not.

For example, the strategic merge patch from the previous section can be written either as:

- op: replace
  path: /machine/network/hostname
  value: worker1

or:

- op: add
  path: /machine/network/hostname
  value: worker1

The correct op depends on whether the /machine/network/hostname section exists already in the machine config or not.

Examples

Machine Network

Base machine configuration:

# ...
machine:
  network:
    interfaces:
      - interface: eth0
        dhcp: false
        addresses:
          - 192.168.10.3/24

The goal is to add a virtual IP 192.168.10.50 to the eth0 interface and add another interface eth1 with DHCP enabled.

machine:
  network:
    interfaces:
      - interface: eth0
        vip:
          ip: 192.168.10.50
      - interface: eth1
        dhcp: true
- op: add
  path: /machine/network/interfaces/0/vip
  value:
    ip: 192.168.10.50
- op: add
  path: /machine/network/interfaces/-
  value:
    interface: eth1
    dhcp: true

Patched machine configuration:

machine:
  network:
    interfaces:
      - interface: eth0
        dhcp: false
        addresses:
          - 192.168.10.3/24
        vip:
          ip: 192.168.10.50
      - interface: eth1
        dhcp: true

Cluster Network

Base machine configuration:

cluster:
  network:
    dnsDomain: cluster.local
    podSubnets:
      - 10.244.0.0/16
    serviceSubnets:
      - 10.96.0.0/12

The goal is to update pod and service subnets and disable default CNI (Flannel).

cluster:
  network:
    podSubnets:
      - 192.168.0.0/16
    serviceSubnets:
      - 192.0.0.0/12
    cni:
      name: none
- op: replace
  path: /cluster/network/podSubnets
  value:
    - 192.168.0.0/16
- op: replace
  path: /cluster/network/serviceSubnets
  value:
    - 192.0.0.0/12
- op: add
  path: /cluster/network/cni
  value:
    name: none

Patched machine configuration:

cluster:
  network:
    dnsDomain: cluster.local
    podSubnets:
      - 192.168.0.0/16
    serviceSubnets:
      - 192.0.0.0/12
    cni:
      name: none

Kubelet

Base machine configuration:

# ...
machine:
  kubelet: {}

The goal is to set the kubelet node IP to come from the subnet 192.168.10.0/24.

machine:
  kubelet:
    nodeIP:
      validSubnets:
        - 192.168.10.0/24
- op: add
  path: /machine/kubelet/nodeIP
  value:
    validSubnets:
      - 192.168.10.0/24

Patched machine configuration:

machine:
  kubelet:
    nodeIP:
      validSubnets:
        - 192.168.10.0/24

Admission Control: Pod Security Policy

Base machine configuration:

cluster:
  apiServer:
    admissionControl:
      - name: PodSecurity
        configuration:
          apiVersion: pod-security.admission.config.k8s.io/v1alpha1
          defaults:
            audit: restricted
            audit-version: latest
            enforce: baseline
            enforce-version: latest
            warn: restricted
            warn-version: latest
          exemptions:
            namespaces:
              - kube-system
            runtimeClasses: []
            usernames: []
          kind: PodSecurityConfiguration

The goal is to add an exemption for the namespace rook-ceph.

cluster:
  apiServer:
    admissionControl:
      - name: PodSecurity
        configuration:
          exemptions:
            namespaces:
              - rook-ceph
- op: add
  path: /cluster/apiServer/admissionControl/0/configuration/exemptions/namespaces/-
  value: rook-ceph

Patched machine configuration:

cluster:
  apiServer:
    admissionControl:
      - name: PodSecurity
        configuration:
          apiVersion: pod-security.admission.config.k8s.io/v1alpha1
          defaults:
            audit: restricted
            audit-version: latest
            enforce: baseline
            enforce-version: latest
            warn: restricted
            warn-version: latest
          exemptions:
            namespaces:
              - kube-system
              - rook-ceph
            runtimeClasses: []
            usernames: []
          kind: PodSecurityConfiguration

Configuration Patching with talosctl CLI

Several talosctl commands accept config patches as command-line flags. Config patches might be passed either as an inline value or as a reference to a file with @file.patch syntax:

talosctl ... --patch '[{"op": "add", "path": "/machine/network/hostname", "value": "worker1"}]' --patch @file.patch

If multiple config patches are specified, they are applied in the order of appearance. The format of the patch (JSON patch or strategic merge patch) is detected automatically.

Talos machine configuration can be patched at the moment of generation with talosctl gen config:

talosctl gen config test-cluster https://172.20.0.1:6443 --config-patch @all.yaml --config-patch-control-plane @cp.yaml --config-patch-worker @worker.yaml

Generated machine configuration can also be patched after the fact with talosctl machineconfig patch

talosctl machineconfig patch worker.yaml --patch @patch.yaml -o worker1.yaml

Machine configuration on the running Talos node can be patched with talosctl patch:

talosctl patch mc --nodes 172.20.0.2 --patch @patch.yaml

2 - Containerd

Customize Containerd Settings

The base containerd configuration expects to merge in any additional configs present in /etc/cri/conf.d/20-customization.part.

Examples

Exposing Metrics

Patch the machine config by adding the following:

machine:
  files:
    - content: |
        [metrics]
          address = "0.0.0.0:11234"        
      path: /etc/cri/conf.d/20-customization.part
      op: create

Once the server reboots, metrics are now available:

$ curl ${IP}:11234/v1/metrics
# HELP container_blkio_io_service_bytes_recursive_bytes The blkio io service bytes recursive
# TYPE container_blkio_io_service_bytes_recursive_bytes gauge
container_blkio_io_service_bytes_recursive_bytes{container_id="0677d73196f5f4be1d408aab1c4125cf9e6c458a4bea39e590ac779709ffbe14",device="/dev/dm-0",major="253",minor="0",namespace="k8s.io",op="Async"} 0
container_blkio_io_service_bytes_recursive_bytes{container_id="0677d73196f5f4be1d408aab1c4125cf9e6c458a4bea39e590ac779709ffbe14",device="/dev/dm-0",major="253",minor="0",namespace="k8s.io",op="Discard"} 0
...
...

Pause Image

This change is often required for air-gapped environments, as containerd CRI plugin has a reference to the pause image which is used to create pods, and it can’t be controlled with Kubernetes pod definitions.

machine:
  files:
    - content: |
        [plugins]
          [plugins."io.containerd.grpc.v1.cri"]
            sandbox_image = "registry.k8s.io/pause:3.8"        
      path: /etc/cri/conf.d/20-customization.part
      op: create

Now the pause image is set to registry.k8s.io/pause:3.8:

$ talosctl containers --kubernetes
NODE         NAMESPACE   ID                                                 IMAGE                                                      PID    STATUS
172.20.0.5   k8s.io      kube-system/kube-flannel-6hfck                     registry.k8s.io/pause:3.8                                  1773   SANDBOX_READY
172.20.0.5   k8s.io      └─ kube-system/kube-flannel-6hfck:install-cni      ghcr.io/siderolabs/install-cni:v1.3.0-alpha.0-2-gb155fa0   0      CONTAINER_EXITED
172.20.0.5   k8s.io      └─ kube-system/kube-flannel-6hfck:install-config   ghcr.io/siderolabs/flannel:v0.20.1                         0      CONTAINER_EXITED
172.20.0.5   k8s.io      └─ kube-system/kube-flannel-6hfck:kube-flannel     ghcr.io/siderolabs/flannel:v0.20.1                         2092   CONTAINER_RUNNING
172.20.0.5   k8s.io      kube-system/kube-proxy-xp7jq                       registry.k8s.io/pause:3.8                                  1780   SANDBOX_READY
172.20.0.5   k8s.io      └─ kube-system/kube-proxy-xp7jq:kube-proxy         registry.k8s.io/kube-proxy:v1.26.0-alpha.3                 1843   CONTAINER_RUNNING

3 - Custom Certificate Authorities

How to supply custom certificate authorities

Appending the Certificate Authority

Put into each machine the PEM encoded certificate:

machine:
  ...
  files:
    - content: |
        -----BEGIN CERTIFICATE-----
        ...
        -----END CERTIFICATE-----        
      permissions: 0644
      path: /etc/ssl/certs/ca-certificates
      op: append

4 - Disk Encryption

Guide on using system disk encryption

It is possible to enable encryption for system disks at the OS level. Currently, only STATE and EPHEMERAL partitions can be encrypted. STATE contains the most sensitive node data: secrets and certs. The EPHEMERAL partition may contain sensitive workload data. Data is encrypted using LUKS2, which is provided by the Linux kernel modules and cryptsetup utility. The operating system will run additional setup steps when encryption is enabled.

If the disk encryption is enabled for the STATE partition, the system will:

  • Save STATE encryption config as JSON in the META partition.
  • Before mounting the STATE partition, load encryption configs either from the machine config or from the META partition. Note that the machine config is always preferred over the META one.
  • Before mounting the STATE partition, format and encrypt it. This occurs only if the STATE partition is empty and has no filesystem.

If the disk encryption is enabled for the EPHEMERAL partition, the system will:

  • Get the encryption config from the machine config.
  • Before mounting the EPHEMERAL partition, encrypt and format it.

This occurs only if the EPHEMERAL partition is empty and has no filesystem.

Note: Talos Linux disk encryption is designed to guard against data being leaked or recovered from a drive that has been removed from a Talos Linux node. It uses the hardware characteristics of the machine in order to decrypt the data, so drives that have been removed, or recycled from a cloud environment or attached to a different virtual machine, will maintain their protection and encryption. It is not designed to protect against attacks where physical access to the machine, including the drive, is available.

Configuration

Disk encryption is disabled by default. To enable disk encryption you should modify the machine configuration with the following options:

machine:
  ...
  systemDiskEncryption:
    ephemeral:
      provider: luks2
      keys:
        - nodeID: {}
          slot: 0
    state:
      provider: luks2
      keys:
        - nodeID: {}
          slot: 0

Encryption Keys

Note: What the LUKS2 docs call “keys” are, in reality, a passphrase. When this passphrase is added, LUKS2 runs argon2 to create an actual key from that passphrase.

LUKS2 supports up to 32 encryption keys and it is possible to specify all of them in the machine configuration. Talos always tries to sync the keys list defined in the machine config with the actual keys defined for the LUKS2 partition. So if you update the keys list, keep at least one key that is not changed to be used for key management.

When you define a key you should specify the key kind and the slot:

machine:
  ...
  state:
    keys:
      - nodeID: {} # key kind
        slot: 1

  ephemeral:
    keys:
      - static:
          passphrase: supersecret
        slot: 0

Take a note that key order does not play any role on which key slot is used. Every key must always have a slot defined.

Encryption Key Kinds

Talos supports two kinds of keys:

  • nodeID which is generated using the node UUID and the partition label (note that if the node UUID is not really random it will fail the entropy check).
  • static which you define right in the configuration.

Note: Use static keys only if your STATE partition is encrypted and only for the EPHEMERAL partition. For the STATE partition it will be stored in the META partition, which is not encrypted.

Key Rotation

In order to completely rotate keys, it is necessary to do talosctl apply-config a couple of times, since there is a need to always maintain a single working key while changing the other keys around it.

So, for example, first add a new key:

machine:
  ...
  ephemeral:
    keys:
      - static:
          passphrase: oldkey
        slot: 0
      - static:
          passphrase: newkey
        slot: 1
  ...

Run:

talosctl apply-config -n <node> -f config.yaml

Then remove the old key:

machine:
  ...
  ephemeral:
    keys:
      - static:
          passphrase: newkey
        slot: 1
  ...

Run:

talosctl apply-config -n <node> -f config.yaml

Going from Unencrypted to Encrypted and Vice Versa

Ephemeral Partition

There is no in-place encryption support for the partitions right now, so to avoid losing data only empty partitions can be encrypted.

As such, migration from unencrypted to encrypted needs some additional handling, especially around explicitly wiping partitions.

  • apply-config should be called with --mode=staged.
  • Partition should be wiped after apply-config, but before the reboot.

Edit your machine config and add the encryption configuration:

vim config.yaml

Apply the configuration with --mode=staged:

talosctl apply-config -f config.yaml -n <node ip> --mode=staged

Wipe the partition you’re going to encrypt:

talosctl reset --system-labels-to-wipe EPHEMERAL -n <node ip> --reboot=true

That’s it! After you run the last command, the partition will be wiped and the node will reboot. During the next boot the system will encrypt the partition.

State Partition

Calling wipe against the STATE partition will make the node lose the config, so the previous flow is not going to work.

The flow should be to first wipe the STATE partition:

talosctl reset  --system-labels-to-wipe STATE -n <node ip> --reboot=true

Node will enter into maintenance mode, then run apply-config with --insecure flag:

talosctl apply-config --insecure -n <node ip> -f config.yaml

After installation is complete the node should encrypt the STATE partition.

5 - Editing Machine Configuration

How to edit and patch Talos machine configuration, with reboot, immediately, or stage update on reboot.

Talos node state is fully defined by machine configuration. Initial configuration is delivered to the node at bootstrap time, but configuration can be updated while the node is running.

Note: Be sure that config is persisted so that configuration updates are not overwritten on reboots. Configuration persistence was enabled by default since Talos 0.5 (persist: true in machine configuration).

There are three talosctl commands which facilitate machine configuration updates:

  • talosctl apply-config to apply configuration from the file
  • talosctl edit machineconfig to launch an editor with existing node configuration, make changes and apply configuration back
  • talosctl patch machineconfig to apply automated machine configuration via JSON patch

Each of these commands can operate in one of four modes:

  • apply change in automatic mode(default): reboot if the change can’t be applied without a reboot, otherwise apply the change immediately
  • apply change with a reboot (--mode=reboot): update configuration, reboot Talos node to apply configuration change
  • apply change immediately (--mode=no-reboot flag): change is applied immediately without a reboot, fails if the change contains any fields that can not be updated without a reboot
  • apply change on next reboot (--mode=staged): change is staged to be applied after a reboot, but node is not rebooted
  • apply change in the interactive mode (--mode=interactive; only for talosctl apply-config): launches TUI based interactive installer

Note: applying change on next reboot (--mode=staged) doesn’t modify current node configuration, so next call to talosctl edit machineconfig --mode=staged will not see changes

Additionally, there is also talosctl get machineconfig, which retrieves the current node configuration API resource and contains the machine configuration in the .spec field. It can be used to modify the configuration locally before being applied to the node.

The list of config changes allowed to be applied immediately in Talos v1.3.7:

  • .debug
  • .cluster
  • .machine.time
  • .machine.certCANs
  • .machine.install (configuration is only applied during install/upgrade)
  • .machine.network
  • .machine.nodeLabels
  • .machine.sysfs
  • .machine.sysctls
  • .machine.logging
  • .machine.controlplane
  • .machine.kubelet
  • .machine.pods
  • .machine.kernel
  • .machine.registries (CRI containerd plugin will not pick up the registry authentication settings without a reboot)
  • .machine.features.kubernetesTalosAPIAccess

talosctl apply-config

This command is traditionally used to submit initial machine configuration generated by talosctl gen config to the node.

It can also be used to apply configuration to running nodes. The initial YAML for this is typically obtained using talosctl get machineconfig -o yaml | yq eval .spec >machs.yaml. (We must use yq because for historical reasons, get returns the configuration as a full resource, while apply-config only accepts the raw machine config directly.)

Example:

talosctl -n <IP> apply-config -f config.yaml

Command apply-config can also be invoked as apply machineconfig:

talosctl -n <IP> apply machineconfig -f config.yaml

Applying machine configuration immediately (without a reboot):

talosctl -n IP apply machineconfig -f config.yaml --mode=no-reboot

Starting the interactive installer:

talosctl -n IP apply machineconfig --mode=interactive

Note: when a Talos node is running in the maintenance mode it’s necessary to provide --insecure (-i) flag to connect to the API and apply the config.

taloctl edit machineconfig

Command talosctl edit loads current machine configuration from the node and launches configured editor to modify the config. If config hasn’t been changed in the editor (or if updated config is empty), update is not applied.

Note: Talos uses environment variables TALOS_EDITOR, EDITOR to pick up the editor preference. If environment variables are missing, vi editor is used by default.

Example:

talosctl -n <IP> edit machineconfig

Configuration can be edited for multiple nodes if multiple IP addresses are specified:

talosctl -n <IP1>,<IP2>,... edit machineconfig

Applying machine configuration change immediately (without a reboot):

talosctl -n <IP> edit machineconfig --mode=no-reboot

talosctl patch machineconfig

Command talosctl patch works similar to talosctl edit command - it loads current machine configuration, but instead of launching configured editor it applies a set of JSON patches to the configuration and writes the result back to the node.

Example, updating kubelet version (in auto mode):

$ talosctl -n <IP> patch machineconfig -p '[{"op": "replace", "path": "/machine/kubelet/image", "value": "ghcr.io/siderolabs/kubelet:v1.26.3"}]'
patched mc at the node <IP>

Updating kube-apiserver version in immediate mode (without a reboot):

$ talosctl -n <IP> patch machineconfig --mode=no-reboot -p '[{"op": "replace", "path": "/cluster/apiServer/image", "value": "registry.k8s.io/kube-apiserver:v1.26.3"}]'
patched mc at the node <IP>

A patch might be applied to multiple nodes when multiple IPs are specified:

talosctl -n <IP1>,<IP2>,... patch machineconfig -p '[{...}]'

Patches can also be sourced from files using @file syntax:

talosctl -n <IP> patch machineconfig -p @kubelet-patch.json -p @manifest-patch.json

It might be easier to store patches in YAML format vs. the default JSON format. Talos can detect file format automatically:

# kubelet-patch.yaml
- op: replace
  path: /machine/kubelet/image
  value: ghcr.io/siderolabs/kubelet:v1.26.3

talosctl -n <IP> patch machineconfig -p @kubelet-patch.yaml

Recovering from Node Boot Failures

If a Talos node fails to boot because of wrong configuration (for example, control plane endpoint is incorrect), configuration can be updated to fix the issue.

6 - Logging

Dealing with Talos Linux logs.

Viewing logs

Kernel messages can be retrieved with talosctl dmesg command:

$ talosctl -n 172.20.1.2 dmesg

172.20.1.2: kern:    info: [2021-11-10T10:09:37.662764956Z]: Command line: init_on_alloc=1 slab_nomerge pti=on consoleblank=0 nvme_core.io_timeout=4294967295 printk.devkmsg=on ima_template=ima-ng ima_appraise=fix ima_hash=sha512 console=ttyS0 reboot=k panic=1 talos.shutdown=halt talos.platform=metal talos.config=http://172.20.1.1:40101/config.yaml
[...]

Service logs can be retrieved with talosctl logs command:

$ talosctl -n 172.20.1.2 services

NODE         SERVICE      STATE     HEALTH   LAST CHANGE   LAST EVENT
172.20.1.2   apid         Running   OK       19m27s ago    Health check successful
172.20.1.2   containerd   Running   OK       19m29s ago    Health check successful
172.20.1.2   cri          Running   OK       19m27s ago    Health check successful
172.20.1.2   etcd         Running   OK       19m22s ago    Health check successful
172.20.1.2   kubelet      Running   OK       19m20s ago    Health check successful
172.20.1.2   machined     Running   ?        19m30s ago    Service started as goroutine
172.20.1.2   trustd       Running   OK       19m27s ago    Health check successful
172.20.1.2   udevd        Running   OK       19m28s ago    Health check successful

$ talosctl -n 172.20.1.2 logs machined

172.20.1.2: [talos] task setupLogger (1/1): done, 106.109µs
172.20.1.2: [talos] phase logger (1/7): done, 564.476µs
[...]

Container logs for Kubernetes pods can be retrieved with talosctl logs -k command:

$ talosctl -n 172.20.1.2 containers -k
NODE         NAMESPACE   ID                                                 IMAGE                                                         PID    STATUS
172.20.1.2   k8s.io      kube-system/kube-flannel-dk6d5                     registry.k8s.io/pause:3.6                                     1329   SANDBOX_READY
172.20.1.2   k8s.io      └─ kube-system/kube-flannel-dk6d5:install-cni      ghcr.io/siderolabs/install-cni:v0.7.0-alpha.0-1-g2bb2efc      0      CONTAINER_EXITED
172.20.1.2   k8s.io      └─ kube-system/kube-flannel-dk6d5:install-config   quay.io/coreos/flannel:v0.13.0                                0      CONTAINER_EXITED
172.20.1.2   k8s.io      └─ kube-system/kube-flannel-dk6d5:kube-flannel     quay.io/coreos/flannel:v0.13.0                                1610   CONTAINER_RUNNING
172.20.1.2   k8s.io      kube-system/kube-proxy-gfkqj                       registry.k8s.io/pause:3.5                                     1311   SANDBOX_READY
172.20.1.2   k8s.io      └─ kube-system/kube-proxy-gfkqj:kube-proxy         registry.k8s.io/kube-proxy:v1.26.3                            1379   CONTAINER_RUNNING

$ talosctl -n 172.20.1.2 logs -k kube-system/kube-proxy-gfkqj:kube-proxy
172.20.1.2: 2021-11-30T19:13:20.567825192Z stderr F I1130 19:13:20.567737       1 server_others.go:138] "Detected node IP" address="172.20.0.3"
172.20.1.2: 2021-11-30T19:13:20.599684397Z stderr F I1130 19:13:20.599613       1 server_others.go:206] "Using iptables Proxier"
[...]

Sending logs

Service logs

You can enable logs sendings in machine configuration:

machine:
  logging:
    destinations:
      - endpoint: "udp://127.0.0.1:12345/"
        format: "json_lines"
      - endpoint: "tcp://host:5044/"
        format: "json_lines"

Several destinations can be specified. Supported protocols are UDP and TCP. The only currently supported format is json_lines:

{
  "msg": "[talos] apply config request: immediate true, on reboot false",
  "talos-level": "info",
  "talos-service": "machined",
  "talos-time": "2021-11-10T10:48:49.294858021Z"
}

Messages are newline-separated when sent over TCP. Over UDP messages are sent with one message per packet. msg, talos-level, talos-service, and talos-time fields are always present; there may be additional fields.

Kernel logs

Kernel log delivery can be enabled with the talos.logging.kernel kernel command line argument, which can be specified in the .machine.installer.extraKernelArgs:

machine:
  install:
    extraKernelArgs:
      - talos.logging.kernel=tcp://host:5044/

Kernel log destination is specified in the same way as service log endpoint. The only supported format is json_lines.

Sample message:

{
  "clock":6252819, // time relative to the kernel boot time
  "facility":"user",
  "msg":"[talos] task startAllServices (1/1): waiting for 6 services\n",
  "priority":"warning",
  "seq":711,
  "talos-level":"warn", // Talos-translated `priority` into common logging level
  "talos-time":"2021-11-26T16:53:21.3258698Z" // Talos-translated `clock` using current time
}

extraKernelArgs in the machine configuration are only applied on Talos upgrades, not just by applying the config. (Upgrading to the same version is fine).

Filebeat example

To forward logs to other Log collection services, one way to do this is sending them to a Filebeat running in the cluster itself (in the host network), which takes care of forwarding it to other endpoints (and the necessary transformations).

If Elastic Cloud on Kubernetes is being used, the following Beat (custom resource) configuration might be helpful:

apiVersion: beat.k8s.elastic.co/v1beta1
kind: Beat
metadata:
  name: talos
spec:
  type: filebeat
  version: 7.15.1
  elasticsearchRef:
    name: talos
  config:
    filebeat.inputs:
      - type: "udp"
        host: "127.0.0.1:12345"
        processors:
          - decode_json_fields:
              fields: ["message"]
              target: ""
          - timestamp:
              field: "talos-time"
              layouts:
                - "2006-01-02T15:04:05.999999999Z07:00"
          - drop_fields:
              fields: ["message", "talos-time"]
          - rename:
              fields:
                - from: "msg"
                  to: "message"

  daemonSet:
    updateStrategy:
      rollingUpdate:
        maxUnavailable: 100%
    podTemplate:
      spec:
        dnsPolicy: ClusterFirstWithHostNet
        hostNetwork: true
        securityContext:
          runAsUser: 0
        containers:
          - name: filebeat
            ports:
              - protocol: UDP
                containerPort: 12345
                hostPort: 12345

The input configuration ensures that messages and timestamps are extracted properly. Refer to the Filebeat documentation on how to forward logs to other outputs.

Also note the hostNetwork: true in the daemonSet configuration.

This ensures filebeat uses the host network, and listens on 127.0.0.1:12345 (UDP) on every machine, which can then be specified as a logging endpoint in the machine configuration.

Fluent-bit example

First, we’ll create a value file for the fluentd-bit Helm chart.

# fluentd-bit.yaml

podAnnotations:
  fluentbit.io/exclude: 'true'

extraPorts:
  - port: 12345
    containerPort: 12345
    protocol: TCP
    name: talos

config:
  service: |
    [SERVICE]
      Flush         5
      Daemon        Off
      Log_Level     warn
      Parsers_File  custom_parsers.conf    

  inputs: |
    [INPUT]
      Name          tcp
      Listen        0.0.0.0
      Port          12345
      Format        json
      Tag           talos.*

    [INPUT]
      Name          tail
      Alias         kubernetes
      Path          /var/log/containers/*.log
      Parser        containerd
      Tag           kubernetes.*

    [INPUT]
      Name          tail
      Alias         audit
      Path          /var/log/audit/kube/*.log
      Parser        audit
      Tag           audit.*    

  filters: |
    [FILTER]
      Name                kubernetes
      Alias               kubernetes
      Match               kubernetes.*
      Kube_Tag_Prefix     kubernetes.var.log.containers.
      Use_Kubelet         Off
      Merge_Log           On
      Merge_Log_Trim      On
      Keep_Log            Off
      K8S-Logging.Parser  Off
      K8S-Logging.Exclude On
      Annotations         Off
      Labels              On

    [FILTER]
      Name          modify
      Match         kubernetes.*
      Add           source kubernetes
      Remove        logtag    

  customParsers: |
    [PARSER]
      Name          audit
      Format        json
      Time_Key      requestReceivedTimestamp
      Time_Format   %Y-%m-%dT%H:%M:%S.%L%z

    [PARSER]
      Name          containerd
      Format        regex
      Regex         ^(?<time>[^ ]+) (?<stream>stdout|stderr) (?<logtag>[^ ]*) (?<log>.*)$
      Time_Key      time
      Time_Format   %Y-%m-%dT%H:%M:%S.%L%z    

  outputs: |
    [OUTPUT]
      Name    stdout
      Alias   stdout
      Match   *
      Format  json_lines    

  # If you wish to ship directly to Loki from Fluentbit,
  # Uncomment the following output, updating the Host with your Loki DNS/IP info as necessary.
  # [OUTPUT]
  # Name loki
  # Match *
  # Host loki.loki.svc
  # Port 3100
  # Labels job=fluentbit
  # Auto_Kubernetes_Labels on

daemonSetVolumes:
  - name: varlog
    hostPath:
      path: /var/log

daemonSetVolumeMounts:
  - name: varlog
    mountPath: /var/log

tolerations:
  - operator: Exists
    effect: NoSchedule

Next, we will add the helm repo for FluentBit, and deploy it to the cluster.

helm repo add fluent https://fluent.github.io/helm-charts
helm upgrade -i --namespace=kube-system -f fluentd-bit.yaml fluent-bit fluent/fluent-bit

Now we need to find the service IP.

$ kubectl -n kube-system get svc -l app.kubernetes.io/name=fluent-bit

NAME         TYPE        CLUSTER-IP     EXTERNAL-IP   PORT(S)             AGE
fluent-bit   ClusterIP   10.200.0.138   <none>        2020/TCP,5170/TCP   108m

Finally, we will change talos log destination with the command talosctl edit mc.

machine:
  logging:
    destinations:
      - endpoint: "tcp://10.200.0.138:5170"
        format: "json_lines"

This example configuration was well tested with Cilium CNI, and it should work with iptables/ipvs based CNI plugins too.

Vector example

Vector is a lightweight observability pipeline ideal for a Kubernetes environment. It can ingest (source) logs from multiple sources, perform remapping on the logs (transform), and forward the resulting pipeline to multiple destinations (sinks). As it is an end to end platform, it can be run as a single-deployment ‘aggregator’ as well as a replicaSet of ‘Agents’ that run on each node.

As Talos can be set as above to send logs to a destination, we can run Vector as an Aggregator, and forward both kernel and service to a UDP socket in-cluster.

Below is an excerpt of a source/sink setup for Talos, with a ‘sink’ destination of an in-cluster Grafana Loki log aggregation service. As Loki can create labels from the log input, we have set up the Loki sink to create labels based on the host IP, service and facility of the inbound logs.

Note that a method of exposing the Vector service will be required which may vary depending on your setup - a LoadBalancer is a good option.

role: "Stateless-Aggregator"

# Sources
sources:
  talos_kernel_logs:
    address: 0.0.0.0:6050
    type: socket
    mode: udp
    max_length: 102400
    decoding:
      codec: json
    host_key: __host

  talos_service_logs:
    address: 0.0.0.0:6051
    type: socket
    mode: udp
    max_length: 102400
    decoding:
      codec: json
    host_key: __host

# Sinks
sinks:
  talos_kernel:
    type: loki
    inputs:
      - talos_kernel_logs_xform
    endpoint: http://loki.system-monitoring:3100
    encoding:
      codec: json
      except_fields:
        - __host
    batch:
      max_bytes: 1048576
    out_of_order_action: rewrite_timestamp
    labels:
      hostname: >-
                {{`{{ __host }}`}}
      facility: >-
                {{`{{ facility }}`}}

  talos_service:
    type: loki
    inputs:
      - talos_service_logs_xform
    endpoint: http://loki.system-monitoring:3100
    encoding:
      codec: json
      except_fields:
        - __host
    batch:
      max_bytes: 400000
    out_of_order_action: rewrite_timestamp
    labels:
      hostname: >-
                {{`{{ __host }}`}}
      service: >-
                {{`{{ "talos-service" }}`}}

7 - Managing Talos PKI

How to manage Public Key Infrastructure

Generating New Client Configuration

Using Controlplane Node

If you have a valid (not expired) talosconfig with os:admin role, a new client configuration file can be generated with talosctl config new against any controlplane node:

talosctl -n CP1 config new talosconfig-reader --roles os:reader --crt-ttl 24h

A specific role and certificate lifetime can be specified.

From Secrets Bundle

If a secrets bundle (secrets.yaml from talosctl gen secrets) was saved while generating machine configuration:

talosctl gen config --with-secrets secrets.yaml --output-types talosconfig -o talosconfig <cluster-name> https://<cluster-endpoint>

Note: <cluster-name> and <cluster-endpoint> arguments don’t matter, as they are not used for talosconfig.

From Control Plane Machine Configuration

In order to create a new key pair for client configuration, you will need the root Talos API CA. The base64 encoded CA can be found in the control plane node’s configuration file. Save the CA public key, and CA private key as ca.crt, and ca.key respectively:

yq eval .machine.ca.crt controlplane.yaml | base64 -d > ca.crt
yq eval .machine.ca.key controlplane.yaml | base64 -d > ca.key

Now, run the following commands to generate a certificate:

talosctl gen key --name admin
talosctl gen csr --key admin.key --ip 127.0.0.1
talosctl gen crt --ca ca --csr admin.csr --name admin

Put the base64-encoded files to the respective location to the talosconfig:

context: mycluster
contexts:
    mycluster:
        endpoints:
            - CP1
            - CP2
        ca: <base64-encoded ca.crt>
        crt: <base64-encoded admin.crt>
        key: <base64-encoded admin.key>

Renewing an Expired Administrator Certificate

By default admin talosconfig certificate is valid for 365 days, while cluster CAs are valid for 10 years. In order to prevent admin talosconfig from expiring, renew the client config before expiration using talosctl config new command described above.

If the talosconfig is expired or lost, you can still generate a new one using either the secrets.yaml secrets bundle or the control plane node’s configuration file using methods described above.

8 - NVIDIA Fabric Manager

In this guide we’ll follow the procedure to enable NVIDIA Fabric Manager.

NVIDIA GPUs that have nvlink support (for eg: A100) will need the nvidia-fabricmanager system extension also enabled in addition to the NVIDIA drivers. For more information on Fabric Manager refer https://docs.nvidia.com/datacenter/tesla/fabric-manager-user-guide/index.html

The published versions of the NVIDIA fabricmanager system extensions is available here

The nvidia-fabricmanager extension version has to match with the NVIDIA driver version in use.

Upgrading Talos and enabling the NVIDIA fabricmanager system extension

In addition to the patch defined in the NVIDIA drivers guide, we need to add the nvidia-fabricmanager system extension to the patch yaml gpu-worker-patch.yaml:

- op: add
  path: /machine/install/extensions
  value:
    - image: ghcr.io/siderolabs/nvidia-open-gpu-kernel-modules:515.65.01-v1.3.7
    - image: ghcr.io/siderolabs/nvidia-container-toolkit:515.65.01-v1.11.0
    - image: ghcr.io/siderolabs/nvidia-fabricmanager:515.65.01
- op: add
  path: /machine/kernel
  value:
    modules:
      - name: nvidia
      - name: nvidia_uvm
      - name: nvidia_drm
      - name: nvidia_modeset
- op: add
  path: /machine/sysctls
  value:
    net.core.bpf_jit_harden: 1

9 - NVIDIA GPU (OSS drivers)

In this guide we’ll follow the procedure to support NVIDIA GPU using OSS drivers on Talos.

Enabling NVIDIA GPU support on Talos is bound by NVIDIA EULA. Talos GPU support has been promoted to beta. The Talos published NVIDIA OSS drivers are bound to a specific Talos release. The extensions versions also needs to be updated when upgrading Talos.

The published versions of the NVIDIA system extensions can be found here:

Upgrading Talos and enabling the NVIDIA modules and the system extension

Make sure to use talosctl version v1.3.7 or later

First create a patch yaml gpu-worker-patch.yaml to update the machine config similar to below:

- op: add
  path: /machine/install/extensions
  value:
    - image: ghcr.io/siderolabs/nvidia-open-gpu-kernel-modules:515.65.01-v1.3.7
    - image: ghcr.io/siderolabs/nvidia-container-toolkit:515.65.01-v1.11.0
- op: add
  path: /machine/kernel
  value:
    modules:
      - name: nvidia
      - name: nvidia_uvm
      - name: nvidia_drm
      - name: nvidia_modeset
- op: add
  path: /machine/sysctls
  value:
    net.core.bpf_jit_harden: 1

Update the driver version and Talos release in the above patch yaml from the published versions if there is a newer one available. Make sure the driver version matches for both the nvidia-open-gpu-kernel-modules and nvidia-container-toolkit extensions. The nvidia-open-gpu-kernel-modules extension is versioned as <nvidia-driver-version>-<talos-release-version> and the nvidia-container-toolkit extension is versioned as <nvidia-driver-version>-<nvidia-container-toolkit-version>.

Now apply the patch to all Talos nodes in the cluster having NVIDIA GPU’s installed:

talosctl patch mc --patch @gpu-worker-patch.yaml

Now we can proceed to upgrading Talos to the same version to enable the system extension:

talosctl upgrade --image=ghcr.io/siderolabs/installer:v1.3.7

Once the node reboots, the NVIDIA modules should be loaded and the system extension should be installed.

This can be confirmed by running:

talosctl read /proc/modules

which should produce an output similar to below:

nvidia_uvm 1146880 - - Live 0xffffffffc2733000 (PO)
nvidia_drm 69632 - - Live 0xffffffffc2721000 (PO)
nvidia_modeset 1142784 - - Live 0xffffffffc25ea000 (PO)
nvidia 39047168 - - Live 0xffffffffc00ac000 (PO)

talosctl get extensions

which should produce an output similar to below:

NODE           NAMESPACE   TYPE              ID                                                                           VERSION   NAME                             VERSION
172.31.41.27   runtime     ExtensionStatus   000.ghcr.io-siderolabs-nvidia-container-toolkit-515.65.01-v1.10.0            1         nvidia-container-toolkit         515.65.01-v1.10.0
172.31.41.27   runtime     ExtensionStatus   000.ghcr.io-siderolabs-nvidia-open-gpu-kernel-modules-515.65.01-v1.2.0       1         nvidia-open-gpu-kernel-modules   515.65.01-v1.2.0

talosctl read /proc/driver/nvidia/version

which should produce an output similar to below:

NVRM version: NVIDIA UNIX x86_64 Kernel Module  515.65.01  Wed Mar 16 11:24:05 UTC 2022
GCC version:  gcc version 12.2.0 (GCC)

Deploying NVIDIA device plugin

First we need to create the RuntimeClass

Apply the following manifest to create a runtime class that uses the extension:

---
apiVersion: node.k8s.io/v1
kind: RuntimeClass
metadata:
  name: nvidia
handler: nvidia

Install the NVIDIA device plugin:

helm repo add nvdp https://nvidia.github.io/k8s-device-plugin
helm repo update
helm install nvidia-device-plugin nvdp/nvidia-device-plugin --version=0.11.0 --set=runtimeClassName=nvidia

Apply the following manifest to run CUDA pod via nvidia runtime:

cat <<EOF | kubectl apply -f -
---
apiVersion: v1
kind: Pod
metadata:
  name: gpu-operator-test
spec:
  restartPolicy: OnFailure
  runtimeClassName: nvidia
  containers:
  - name: cuda-vector-add
    image: "nvidia/samples:vectoradd-cuda11.6.0"
    resources:
      limits:
         nvidia.com/gpu: 1
<<EOF

The status can be viewed by running:

kubectl get pods

which should produce an output similar to below:

NAME                READY   STATUS      RESTARTS   AGE
gpu-operator-test   0/1     Completed   0          13s

kubectl logs gpu-operator-test

which should produce an output similar to below:

[Vector addition of 50000 elements]
Copy input data from the host memory to the CUDA device
CUDA kernel launch with 196 blocks of 256 threads
Copy output data from the CUDA device to the host memory
Test PASSED
Done

10 - NVIDIA GPU (Proprietary drivers)

In this guide we’ll follow the procedure to support NVIDIA GPU using proprietary drivers on Talos.

Enabling NVIDIA GPU support on Talos is bound by NVIDIA EULA. Talos GPU support has been promoted to beta.

These are the steps to enabling NVIDIA support in Talos.

  • Talos pre-installed on a node with NVIDIA GPU installed.
  • Building a custom Talos installer image with NVIDIA modules
  • Upgrading Talos with the custom installer and enabling NVIDIA modules and the system extension

This requires that the user build and maintain their own Talos installer image.

Prerequisites

This guide assumes the user has access to a container registry with push permissions, docker installed on the build machine and the Talos host has pull access to the container registry.

Set the local registry and username environment variables:

export USERNAME=<username>
export REGISTRY=<registry>
export TAG=v1.3.7-nvidia

For eg:

export USERNAME=talos-user
export REGISTRY=ghcr.io

The examples below will use the sample variables set above. Modify accordingly for your environment.

Building the installer image

Start by cloning the pkgs repository.

Now run the following command to build and push custom Talos kernel image and the NVIDIA image with the NVIDIA kernel modules signed by the kernel built along with it.

make kernel nonfree-kmod-nvidia PLATFORM=linux/amd64 PUSH=true

Replace the platform with linux/arm64 if building for ARM64

Now we need to create a custom Talos installer image.

Start by creating a Dockerfile with the following content:

FROM scratch as customization
COPY --from=ghcr.io/talos-user/nonfree-kmod-nvidia:v1.3.7-nvidia /lib/modules /lib/modules

FROM ghcr.io/siderolabs/installer:v1.3.7
COPY --from=ghcr.io/talos-user/kernel:v1.3.7-nvidia /boot/vmlinuz /usr/install/${TARGETARCH}/vmlinuz

Now build the image and push it to the registry.

DOCKER_BUILDKIT=0 docker build --squash --build-arg RM="/lib/modules" -t ghcr.io/talos-user/installer:v1.3.7-nvidia .
docker push ghcr.io/talos-user/installer:v1.3.7-nvidia

Note: buildkit has a bug #816, to disable it use DOCKER_BUILDKIT=0 Replace the platform with linux/arm64 if building for ARM64

Upgrading Talos and enabling the NVIDIA modules and the system extension

Make sure to use talosctl version v1.3.7 or later

First create a patch yaml gpu-worker-patch.yaml to update the machine config similar to below:

- op: add
  path: /machine/install/extensions
  value:
    - image: ghcr.io/siderolabs/nvidia-container-toolkit:515.65.01-v1.11.0
- op: add
  path: /machine/kernel
  value:
    modules:
      - name: nvidia
      - name: nvidia_uvm
      - name: nvidia_drm
      - name: nvidia_modeset
- op: add
  path: /machine/sysctls
  value:
    net.core.bpf_jit_harden: 1

Now apply the patch to all Talos nodes in the cluster having NVIDIA GPU’s installed:

talosctl patch mc --patch @gpu-worker-patch.yaml

Now we can proceed to upgrading Talos with the installer built previously:

talosctl upgrade --image=ghcr.io/talos-user/installer:v1.3.7-nvidia

Once the node reboots, the NVIDIA modules should be loaded and the system extension should be installed.

This can be confirmed by running:

talosctl read /proc/modules

which should produce an output similar to below:

nvidia_uvm 1146880 - - Live 0xffffffffc2733000 (PO)
nvidia_drm 69632 - - Live 0xffffffffc2721000 (PO)
nvidia_modeset 1142784 - - Live 0xffffffffc25ea000 (PO)
nvidia 39047168 - - Live 0xffffffffc00ac000 (PO)

talosctl get extensions

which should produce an output similar to below:

NODE           NAMESPACE   TYPE              ID                                                                 VERSION   NAME                       VERSION
172.31.41.27   runtime     ExtensionStatus   000.ghcr.io-frezbo-nvidia-container-toolkit-510.60.02-v1.9.0       1         nvidia-container-toolkit   510.60.02-v1.9.0

talosctl read /proc/driver/nvidia/version

which should produce an output similar to below:

NVRM version: NVIDIA UNIX x86_64 Kernel Module  510.60.02  Wed Mar 16 11:24:05 UTC 2022
GCC version:  gcc version 11.2.0 (GCC)

Deploying NVIDIA device plugin

First we need to create the RuntimeClass

Apply the following manifest to create a runtime class that uses the extension:

---
apiVersion: node.k8s.io/v1
kind: RuntimeClass
metadata:
  name: nvidia
handler: nvidia

Install the NVIDIA device plugin:

helm repo add nvdp https://nvidia.github.io/k8s-device-plugin
helm repo update
helm install nvidia-device-plugin nvdp/nvidia-device-plugin --version=0.11.0 --set=runtimeClassName=nvidia

Apply the following manifest to run CUDA pod via nvidia runtime:

cat <<EOF | kubectl apply -f -
---
apiVersion: v1
kind: Pod
metadata:
  name: gpu-operator-test
spec:
  restartPolicy: OnFailure
  runtimeClassName: nvidia
  containers:
  - name: cuda-vector-add
    image: "nvidia/samples:vectoradd-cuda11.6.0"
    resources:
      limits:
         nvidia.com/gpu: 1
<<EOF

The status can be viewed by running:

kubectl get pods

which should produce an output similar to below:

NAME                READY   STATUS      RESTARTS   AGE
gpu-operator-test   0/1     Completed   0          13s

kubectl logs gpu-operator-test

which should produce an output similar to below:

[Vector addition of 50000 elements]
Copy input data from the host memory to the CUDA device
CUDA kernel launch with 196 blocks of 256 threads
Copy output data from the CUDA device to the host memory
Test PASSED
Done

11 - Pull Through Image Cache

How to set up local transparent container images caches.

In this guide we will create a set of local caching Docker registry proxies to minimize local cluster startup time.

When running Talos locally, pulling images from container registries might take a significant amount of time. We spin up local caching pass-through registries to cache images and configure a local Talos cluster to use those proxies. A similar approach might be used to run Talos in production in air-gapped environments. It can be also used to verify that all the images are available in local registries.

Video Walkthrough

To see a live demo of this writeup, see the video below:

Requirements

The follow are requirements for creating the set of caching proxies:

  • Docker 18.03 or greater
  • Local cluster requirements for either docker or QEMU.

Launch the Caching Docker Registry Proxies

Talos pulls from docker.io, registry.k8s.io, gcr.io, and ghcr.io by default. If your configuration is different, you might need to modify the commands below:

docker run -d -p 5000:5000 \
    -e REGISTRY_PROXY_REMOTEURL=https://registry-1.docker.io \
    --restart always \
    --name registry-docker.io registry:2

docker run -d -p 5001:5000 \
    -e REGISTRY_PROXY_REMOTEURL=https://registry.k8s.io \
    --restart always \
    --name registry-registry.k8s.io registry:2

docker run -d -p 5003:5000 \
    -e REGISTRY_PROXY_REMOTEURL=https://gcr.io \
    --restart always \
    --name registry-gcr.io registry:2

docker run -d -p 5004:5000 \
    -e REGISTRY_PROXY_REMOTEURL=https://ghcr.io \
    --restart always \
    --name registry-ghcr.io registry:2

Note: Proxies are started as docker containers, and they’re automatically configured to start with Docker daemon.

As a registry container can only handle a single upstream Docker registry, we launch a container per upstream, each on its own host port (5000, 5001, 5002, 5003 and 5004).

Using Caching Registries with QEMU Local Cluster

With a QEMU local cluster, a bridge interface is created on the host. As registry containers expose their ports on the host, we can use bridge IP to direct proxy requests.

sudo talosctl cluster create --provisioner qemu \
    --registry-mirror docker.io=http://10.5.0.1:5000 \
    --registry-mirror registry.k8s.io=http://10.5.0.1:5001 \
    --registry-mirror gcr.io=http://10.5.0.1:5003 \
    --registry-mirror ghcr.io=http://10.5.0.1:5004

The Talos local cluster should now start pulling via caching registries. This can be verified via registry logs, e.g. docker logs -f registry-docker.io. The first time cluster boots, images are pulled and cached, so next cluster boot should be much faster.

Note: 10.5.0.1 is a bridge IP with default network (10.5.0.0/24), if using custom --cidr, value should be adjusted accordingly.

Using Caching Registries with docker Local Cluster

With a docker local cluster we can use docker bridge IP, default value for that IP is 172.17.0.1. On Linux, the docker bridge address can be inspected with ip addr show docker0.

talosctl cluster create --provisioner docker \
    --registry-mirror docker.io=http://172.17.0.1:5000 \
    --registry-mirror registry.k8s.io=http://172.17.0.1:5001 \
    --registry-mirror gcr.io=http://172.17.0.1:5003 \
    --registry-mirror ghcr.io=http://172.17.0.1:5004

Machine Configuration

The caching registries can be configured via machine configuration patch, equivalent to the command line flags above:

machine:
  registries:
    mirrors:
      docker.io:
        endpoints:
          - http://10.5.0.1:5000
      gcr.io:
        endpoints:
          - http://10.5.0.1:5003
      ghcr.io:
        endpoints:
          - http://10.5.0.1:5004
      registry.k8s.io:
        endpoints:
          - http://10.5.0.1:5001

Cleaning Up

To cleanup, run:

docker rm -f registry-docker.io
docker rm -f registry-registry.k8s.io
docker rm -f registry-gcr.io
docker rm -f registry-ghcr.io

Note: Removing docker registry containers also removes the image cache. So if you plan to use caching registries, keep the containers running.

Using Harbor as a Caching Registry

Harbor is an open source container registry that can be used as a caching proxy. Harbor supports configuring multiple upstream registries, so it can be used to cache multiple registries at once behind a single endpoint.

Harbor Endpoints

Harbor Projects

As Harbor puts a registry name in the pull image path, we need to set overridePath: true to prevent Talos and containerd from appending /v2 to the path.

machine:
  registries:
    mirrors:
      docker.io:
        endpoints:
          - http://harbor/v2/proxy-docker.io
        overridePath: true
      ghcr.io:
        endpoints:
          - http://harbor/v2/proxy-ghcr.io
        overridePath: true
      gcr.io:
        endpoints:
          - http://harbor/v2/proxy-gcr.io
        overridePath: true
      registry.k8s.io:
        endpoints:
          - http://harbor/v2/proxy-registry.k8s.io
        overridePath: true

The Harbor external endpoint (http://harbor in this example) can be configured with authentication or custom TLS:

machine:
  registries:
    config:
      harbor:
        auth:
          username: admin
          password: password

12 - Role-based access control (RBAC)

Set up RBAC on the Talos Linux API.

Talos v0.11 introduced initial support for role-based access control (RBAC). This guide will explain what that is and how to enable it without losing access to the cluster.

RBAC in Talos

Talos uses certificates to authorize users. The certificate subject’s organization field is used to encode user roles. There is a set of predefined roles that allow access to different API methods:

  • os:admin grants access to all methods;
  • os:reader grants access to “safe” methods (for example, that includes the ability to list files, but does not include the ability to read files content);
  • os:etcd:backup grants access to /machine.MachineService/EtcdSnapshot method.

Roles in the current talosconfig can be checked with the following command:

$ talosctl config info

[...]
Roles:               os:admin
[...]

RBAC is enabled by default in new clusters created with talosctl v0.11+ and disabled otherwise.

Enabling RBAC

First, both the Talos cluster and talosctl tool should be upgraded. Then the talosctl config new command should be used to generate a new client configuration with the os:admin role. Additional configurations and certificates for different roles can be generated by passing --roles flag:

talosctl config new --roles=os:reader reader

That command will create a new client configuration file reader with a new certificate with os:reader role.

After that, RBAC should be enabled in the machine configuration:

machine:
  features:
    rbac: true

13 - System Extensions

Customizing the Talos Linux immutable root file system.

System extensions allow extending the Talos root filesystem, which enables a variety of features, such as including custom container runtimes, loading additional firmware, etc.

System extensions are only activated during the installation or upgrade of Talos Linux. With system extensions installed, the Talos root filesystem is still immutable and read-only.

Configuration

System extensions are configured in the .machine.install section:

machine:
  install:
    extensions:
      - image: ghcr.io/siderolabs/gvisor:33f613e

During the initial install (e.g. when PXE booting or booting from an ISO), Talos will pull down container images for system extensions, validate them, and include them into the Talos initramfs image. System extensions will be activated on boot and overlaid on top of the Talos root filesystem.

In order to update the system extensions for a running instance, update .machine.install.extensions and upgrade Talos. (Note: upgrading to the same version of Talos is fine).

Building a Talos Image with System Extensions

System extensions can be installed into the Talos disk image (e.g. AWS AMI or VMWare OVF) by running the following command to generate the image from the Talos source tree:

make image-metal IMAGER_SYSTEM_EXTENSIONS="ghcr.io/siderolabs/amd-ucode:20220411 ghcr.io/siderolabs/gvisor:20220405.0-v1.0.0-10-g82b41ad"

Authoring System Extensions

A Talos system extension is a container image with the specific folder structure. System extensions can be built and managed using any tool that produces container images, e.g. docker build.

Sidero Labs maintains a repository of system extensions.

Resource Definitions

Use talosctl get extensions to get a list of system extensions:

$ talosctl get extensions
NODE         NAMESPACE   TYPE              ID                                              VERSION   NAME          VERSION
172.20.0.2   runtime     ExtensionStatus   000.ghcr.io-talos-systems-gvisor-54b831d        1         gvisor        20220117.0-v1.0.0
172.20.0.2   runtime     ExtensionStatus   001.ghcr.io-talos-systems-intel-ucode-54b831d   1         intel-ucode   microcode-20210608-v1.0.0

Use YAML or JSON format to see additional details about the extension:

$ talosctl -n 172.20.0.2 get extensions 001.ghcr.io-talos-systems-intel-ucode-54b831d -o yaml
node: 172.20.0.2
metadata:
    namespace: runtime
    type: ExtensionStatuses.runtime.talos.dev
    id: 001.ghcr.io-talos-systems-intel-ucode-54b831d
    version: 1
    owner: runtime.ExtensionStatusController
    phase: running
    created: 2022-02-10T18:25:04Z
    updated: 2022-02-10T18:25:04Z
spec:
    image: 001.ghcr.io-talos-systems-intel-ucode-54b831d.sqsh
    metadata:
        name: intel-ucode
        version: microcode-20210608-v1.0.0
        author: Spencer Smith
        description: |
            This system extension provides Intel microcode binaries.
        compatibility:
            talos:
                version: '>= v1.0.0'

Example: gVisor

See readme of the gVisor extension.