Version v0.12 of the documentation is no longer actively maintained. The site that you are currently viewing is an archived snapshot. For up-to-date documentation, see the latest version.

Configuration

Package v1alpha1 configuration file contains all the options available for configuring a machine.

To generate a set of basic configuration files, run:

talosctl gen config --version v1alpha1 <cluster name> <cluster endpoint>

This will generate a machine config for each node type, and a talosconfig for the CLI.

Config

Config defines the v1alpha1 configuration file.

version: v1alpha1
persist: true
machine: # ...
cluster: # ...

version string

Indicates the schema used to decode the contents.

Valid values:

  • v1alpha1

debug bool

Enable verbose logging to the console. All system containers logs will flow into serial console.

Note: To avoid breaking Talos bootstrap flow enable this option only if serial console can handle high message throughput.

Valid values:

  • true

  • yes

  • false

  • no

persist bool

Indicates whether to pull the machine config upon every boot.

Valid values:

  • true

  • yes

  • false

  • no

machine MachineConfig

Provides machine specific configuration options.

cluster ClusterConfig

Provides cluster specific configuration options.

MachineConfig

MachineConfig represents the machine-specific config values.

Appears in:

type: controlplane
# InstallConfig represents the installation options for preparing a node.
install:
    disk: /dev/sda # The disk used for installations.
    # Allows for supplying extra kernel args via the bootloader.
    extraKernelArgs:
        - console=ttyS1
        - panic=10
    image: ghcr.io/talos-systems/installer:latest # Allows for supplying the image used to perform the installation.
    bootloader: true # Indicates if a bootloader should be installed.
    wipe: false # Indicates if the installation disk should be wiped at installation time.

    # # Look up disk using disk attributes like model, size, serial and others.
    # diskSelector:
    #     size: 4GB # Disk size.
    #     model: WDC* # Disk model `/sys/block/<dev>/device/model`.

type string

Defines the role of the machine within the cluster.

Init

Init node type designates the first control plane node to come up. You can think of it like a bootstrap node. This node will perform the initial steps to bootstrap the cluster – generation of TLS assets, starting of the control plane, etc.

Control Plane

Control Plane node type designates the node as a control plane member. This means it will host etcd along with the Kubernetes master components such as API Server, Controller Manager, Scheduler.

Worker

Worker node type designates the node as a worker node. This means it will be an available compute node for scheduling workloads.

This node type was previously known as “join”; that value is still supported but deprecated.

Valid values:

  • init

  • controlplane

  • worker

token string

The token is used by a machine to join the PKI of the cluster. Using this token, a machine will create a certificate signing request (CSR), and request a certificate that will be used as its’ identity.

Warning: It is important to ensure that this token is correct since a machine’s certificate has a short TTL by default.

Examples:

token: 328hom.uqjzh6jnn2eie9oi

ca PEMEncodedCertificateAndKey

The root certificate authority of the PKI. It is composed of a base64 encoded crt and key.

Examples:

ca:
    crt: TFMwdExTMUNSVWRKVGlCRFJWSlVTVVpKUTBGVVJTMHRMUzB0Q2sxSlNVSklla05DTUhGLi4u
    key: TFMwdExTMUNSVWRKVGlCRlJESTFOVEU1SUZCU1NWWkJWRVVnUzBWWkxTMHRMUzBLVFVNLi4u

certSANs []string

Extra certificate subject alternative names for the machine’s certificate. By default, all non-loopback interface IPs are automatically added to the certificate’s SANs.

Examples:

certSANs:
    - 10.0.0.10
    - 172.16.0.10
    - 192.168.0.10

kubelet KubeletConfig

Used to provide additional options to the kubelet.

Examples:

kubelet:
    image: ghcr.io/talos-systems/kubelet:v1.22.1 # The `image` field is an optional reference to an alternative kubelet image.
    # The `extraArgs` field is used to provide additional flags to the kubelet.
    extraArgs:
        feature-gates: ServerSideApply=true

    # # The `ClusterDNS` field is an optional reference to an alternative kubelet clusterDNS ip list.
    # clusterDNS:
    #     - 10.96.0.10
    #     - 169.254.2.53

    # # The `extraMounts` field is used to add additional mounts to the kubelet container.
    # extraMounts:
    #     - destination: /var/lib/example
    #       type: bind
    #       source: /var/lib/example
    #       options:
    #         - rshared
    #         - rw

network NetworkConfig

Provides machine specific network configuration options.

Examples:

network:
    hostname: worker-1 # Used to statically set the hostname for the machine.
    # `interfaces` is used to define the network interface configuration.
    interfaces:
        - interface: eth0 # The interface name.
          # Assigns static IP addresses to the interface.
          addresses:
            - 192.168.2.0/24
          # A list of routes associated with the interface.
          routes:
            - network: 0.0.0.0/0 # The route's network.
              gateway: 192.168.2.1 # The route's gateway.
              metric: 1024 # The optional metric for the route.
          mtu: 1500 # The interface's MTU.

          # # Bond specific options.
          # bond:
          #     # The interfaces that make up the bond.
          #     interfaces:
          #         - eth0
          #         - eth1
          #     mode: 802.3ad # A bond option.
          #     lacpRate: fast # A bond option.

          # # Indicates if DHCP should be used to configure the interface.
          # dhcp: true

          # # DHCP specific options.
          # dhcpOptions:
          #     routeMetric: 1024 # The priority of all routes received via DHCP.

          # # Wireguard specific configuration.

          # # wireguard server example
          # wireguard:
          #     privateKey: ABCDEF... # Specifies a private key configuration (base64 encoded).
          #     listenPort: 51111 # Specifies a device's listening port.
          #     # Specifies a list of peer configurations to apply to a device.
          #     peers:
          #         - publicKey: ABCDEF... # Specifies the public key of this peer.
          #           endpoint: 192.168.1.3 # Specifies the endpoint of this peer entry.
          #           # AllowedIPs specifies a list of allowed IP addresses in CIDR notation for this peer.
          #           allowedIPs:
          #             - 192.168.1.0/24
          # # wireguard peer example
          # wireguard:
          #     privateKey: ABCDEF... # Specifies a private key configuration (base64 encoded).
          #     # Specifies a list of peer configurations to apply to a device.
          #     peers:
          #         - publicKey: ABCDEF... # Specifies the public key of this peer.
          #           endpoint: 192.168.1.2 # Specifies the endpoint of this peer entry.
          #           persistentKeepaliveInterval: 10s # Specifies the persistent keepalive interval for this peer.
          #           # AllowedIPs specifies a list of allowed IP addresses in CIDR notation for this peer.
          #           allowedIPs:
          #             - 192.168.1.0/24

          # # Virtual (shared) IP address configuration.
          # vip:
          #     ip: 172.16.199.55 # Specifies the IP address to be used.
    # Used to statically set the nameservers for the machine.
    nameservers:
        - 9.8.7.6
        - 8.7.6.5

    # # Allows for extra entries to be added to the `/etc/hosts` file
    # extraHostEntries:
    #     - ip: 192.168.1.100 # The IP of the host.
    #       # The host alias.
    #       aliases:
    #         - example
    #         - example.domain.tld

disks []MachineDisk

Used to partition, format and mount additional disks. Since the rootfs is read only with the exception of /var, mounts are only valid if they are under /var. Note that the partitioning and formating is done only once, if and only if no existing partitions are found. If size: is omitted, the partition is sized to occupy the full disk.

Note: size is in units of bytes.

Examples:

disks:
    - device: /dev/sdb # The name of the disk to use.
      # A list of partitions to create on the disk.
      partitions:
        - mountpoint: /var/mnt/extra # Where to mount the partition.

          # # The size of partition: either bytes or human readable representation. If `size:` is omitted, the partition is sized to occupy the full disk.

          # # Human readable representation.
          # size: 100 MB
          # # Precise value in bytes.
          # size: 1073741824

install InstallConfig

Used to provide instructions for installations.

Examples:

install:
    disk: /dev/sda # The disk used for installations.
    # Allows for supplying extra kernel args via the bootloader.
    extraKernelArgs:
        - console=ttyS1
        - panic=10
    image: ghcr.io/talos-systems/installer:latest # Allows for supplying the image used to perform the installation.
    bootloader: true # Indicates if a bootloader should be installed.
    wipe: false # Indicates if the installation disk should be wiped at installation time.

    # # Look up disk using disk attributes like model, size, serial and others.
    # diskSelector:
    #     size: 4GB # Disk size.
    #     model: WDC* # Disk model `/sys/block/<dev>/device/model`.

files []MachineFile

Allows the addition of user specified files. The value of op can be create, overwrite, or append. In the case of create, path must not exist. In the case of overwrite, and append, path must be a valid file. If an op value of append is used, the existing file will be appended. Note that the file contents are not required to be base64 encoded.

Note: The specified path is relative to /var.

Examples:

files:
    - content: '...' # The contents of the file.
      permissions: 0o666 # The file's permissions in octal.
      path: /tmp/file.txt # The path of the file.
      op: append # The operation to use

env Env

The env field allows for the addition of environment variables. All environment variables are set on PID 1 in addition to every service.

Valid values:

  • GRPC_GO_LOG_VERBOSITY_LEVEL

  • GRPC_GO_LOG_SEVERITY_LEVEL

  • http_proxy

  • https_proxy

  • no_proxy

Examples:

env:
    GRPC_GO_LOG_SEVERITY_LEVEL: info
    GRPC_GO_LOG_VERBOSITY_LEVEL: "99"
    https_proxy: http://SERVER:PORT/

env:
    GRPC_GO_LOG_SEVERITY_LEVEL: error
    https_proxy: https://USERNAME:PASSWORD@SERVER:PORT/

env:
    https_proxy: http://DOMAIN\USERNAME:PASSWORD@SERVER:PORT/

time TimeConfig

Used to configure the machine’s time settings.

Examples:

time:
    disabled: false # Indicates if the time service is disabled for the machine.
    # Specifies time (NTP) servers to use for setting the system time.
    servers:
        - time.cloudflare.com

sysctls map[string]string

Used to configure the machine’s sysctls.

Examples:

sysctls:
    kernel.domainname: talos.dev
    net.ipv4.ip_forward: "0"

registries RegistriesConfig

Used to configure the machine’s container image registry mirrors.

Automatically generates matching CRI configuration for registry mirrors.

The mirrors section allows to redirect requests for images to non-default registry, which might be local registry or caching mirror.

The config section provides a way to authenticate to the registry with TLS client identity, provide registry CA, or authentication information. Authentication information has same meaning with the corresponding field in .docker/config.json.

See also matching configuration for CRI containerd plugin.

Examples:

registries:
    # Specifies mirror configuration for each registry.
    mirrors:
        docker.io:
            # List of endpoints (URLs) for registry mirrors to use.
            endpoints:
                - https://registry.local
    # Specifies TLS & auth configuration for HTTPS image registries.
    config:
        registry.local:
            # The TLS configuration for the registry.
            tls:
                # Enable mutual TLS authentication with the registry.
                clientIdentity:
                    crt: TFMwdExTMUNSVWRKVGlCRFJWSlVTVVpKUTBGVVJTMHRMUzB0Q2sxSlNVSklla05DTUhGLi4u
                    key: TFMwdExTMUNSVWRKVGlCRlJESTFOVEU1SUZCU1NWWkJWRVVnUzBWWkxTMHRMUzBLVFVNLi4u
            # The auth configuration for this registry.
            auth:
                username: username # Optional registry authentication.
                password: password # Optional registry authentication.

systemDiskEncryption SystemDiskEncryptionConfig

Machine system disk encryption configuration. Defines each system partition encryption parameters.

Examples:

systemDiskEncryption:
    # Ephemeral partition encryption.
    ephemeral:
        provider: luks2 # Encryption provider to use for the encryption.
        # Defines the encryption keys generation and storage method.
        keys:
            - # Deterministically generated key from the node UUID and PartitionLabel.
              nodeID: {}
              slot: 0 # Key slot number for LUKS2 encryption.

        # # Cipher kind to use for the encryption. Depends on the encryption provider.
        # cipher: aes-xts-plain64

        # # Defines the encryption sector size.
        # blockSize: 4096

        # # Additional --perf parameters for the LUKS2 encryption.
        # options:
        #     - no_read_workqueue
        #     - no_write_workqueue

features FeaturesConfig

Features describe individual Talos features that can be switched on or off.

Examples:

features:
    rbac: true # Enable role-based access control (RBAC).

ClusterConfig

ClusterConfig represents the cluster-wide config values.

Appears in:

# ControlPlaneConfig represents the control plane configuration options.
controlPlane:
    endpoint: https://1.2.3.4 # Endpoint is the canonical controlplane endpoint, which can be an IP address or a DNS hostname.
    localAPIServerPort: 443 # The port that the API server listens on internally.
clusterName: talos.local
# ClusterNetworkConfig represents kube networking configuration options.
network:
    # The CNI used.
    cni:
        name: flannel # Name of CNI to use.
    dnsDomain: cluster.local # The domain used by Kubernetes DNS.
    # The pod subnet CIDR.
    podSubnets:
        - 10.244.0.0/16
    # The service subnet CIDR.
    serviceSubnets:
        - 10.96.0.0/12

id string

Globally unique identifier for this cluster.

secret string

Shared secret of cluster. This secret is shared among cluster members but should never be sent over the network.

controlPlane ControlPlaneConfig

Provides control plane specific configuration options.

Examples:

controlPlane:
    endpoint: https://1.2.3.4 # Endpoint is the canonical controlplane endpoint, which can be an IP address or a DNS hostname.
    localAPIServerPort: 443 # The port that the API server listens on internally.

clusterName string

Configures the cluster’s name.

network ClusterNetworkConfig

Provides cluster specific network configuration options.

Examples:

network:
    # The CNI used.
    cni:
        name: flannel # Name of CNI to use.
    dnsDomain: cluster.local # The domain used by Kubernetes DNS.
    # The pod subnet CIDR.
    podSubnets:
        - 10.244.0.0/16
    # The service subnet CIDR.
    serviceSubnets:
        - 10.96.0.0/12

token string

The bootstrap token used to join the cluster.

Examples:

token: wlzjyw.bei2zfylhs2by0wd

aescbcEncryptionSecret string

The key used for the encryption of secret data at rest.

Examples:

aescbcEncryptionSecret: z01mye6j16bspJYtTB/5SFX8j7Ph4JXxM2Xuu4vsBPM=

ca PEMEncodedCertificateAndKey

The base64 encoded root certificate authority used by Kubernetes.

Examples:

ca:
    crt: TFMwdExTMUNSVWRKVGlCRFJWSlVTVVpKUTBGVVJTMHRMUzB0Q2sxSlNVSklla05DTUhGLi4u
    key: TFMwdExTMUNSVWRKVGlCRlJESTFOVEU1SUZCU1NWWkJWRVVnUzBWWkxTMHRMUzBLVFVNLi4u

aggregatorCA PEMEncodedCertificateAndKey

The base64 encoded aggregator certificate authority used by Kubernetes for front-proxy certificate generation.

This CA can be self-signed.

Examples:

aggregatorCA:
    crt: TFMwdExTMUNSVWRKVGlCRFJWSlVTVVpKUTBGVVJTMHRMUzB0Q2sxSlNVSklla05DTUhGLi4u
    key: TFMwdExTMUNSVWRKVGlCRlJESTFOVEU1SUZCU1NWWkJWRVVnUzBWWkxTMHRMUzBLVFVNLi4u

serviceAccount PEMEncodedKey

The base64 encoded private key for service account token generation.

Examples:

serviceAccount:
    key: TFMwdExTMUNSVWRKVGlCRlJESTFOVEU1SUZCU1NWWkJWRVVnUzBWWkxTMHRMUzBLVFVNLi4u

apiServer APIServerConfig

API server specific configuration options.

Examples:

apiServer:
    image: k8s.gcr.io/kube-apiserver:v1.22.1 # The container image used in the API server manifest.
    # Extra arguments to supply to the API server.
    extraArgs:
        feature-gates: ServerSideApply=true
        http2-max-streams-per-connection: "32"
    # Extra certificate subject alternative names for the API server's certificate.
    certSANs:
        - 1.2.3.4
        - 4.5.6.7

controllerManager ControllerManagerConfig

Controller manager server specific configuration options.

Examples:

controllerManager:
    image: k8s.gcr.io/kube-controller-manager:v1.22.1 # The container image used in the controller manager manifest.
    # Extra arguments to supply to the controller manager.
    extraArgs:
        feature-gates: ServerSideApply=true

proxy ProxyConfig

Kube-proxy server-specific configuration options

Examples:

proxy:
    image: k8s.gcr.io/kube-proxy:v1.22.1 # The container image used in the kube-proxy manifest.
    mode: ipvs # proxy mode of kube-proxy.
    # Extra arguments to supply to kube-proxy.
    extraArgs:
        proxy-mode: iptables

scheduler SchedulerConfig

Scheduler server specific configuration options.

Examples:

scheduler:
    image: k8s.gcr.io/kube-scheduler:v1.22.1 # The container image used in the scheduler manifest.
    # Extra arguments to supply to the scheduler.
    extraArgs:
        feature-gates: AllBeta=true

etcd EtcdConfig

Etcd specific configuration options.

Examples:

etcd:
    image: gcr.io/etcd-development/etcd:v3.4.16 # The container image used to create the etcd service.
    # The `ca` is the root certificate authority of the PKI.
    ca:
        crt: TFMwdExTMUNSVWRKVGlCRFJWSlVTVVpKUTBGVVJTMHRMUzB0Q2sxSlNVSklla05DTUhGLi4u
        key: TFMwdExTMUNSVWRKVGlCRlJESTFOVEU1SUZCU1NWWkJWRVVnUzBWWkxTMHRMUzBLVFVNLi4u
    # Extra arguments to supply to etcd.
    extraArgs:
        election-timeout: "5000"

coreDNS CoreDNS

Core DNS specific configuration options.

Examples:

coreDNS:
    image: docker.io/coredns/coredns:1.8.4 # The `image` field is an override to the default coredns image.

externalCloudProvider ExternalCloudProviderConfig

External cloud provider configuration.

Examples:

externalCloudProvider:
    enabled: true # Enable external cloud provider.
    # A list of urls that point to additional manifests for an external cloud provider.
    manifests:
        - https://raw.githubusercontent.com/kubernetes/cloud-provider-aws/v1.20.0-alpha.0/manifests/rbac.yaml
        - https://raw.githubusercontent.com/kubernetes/cloud-provider-aws/v1.20.0-alpha.0/manifests/aws-cloud-controller-manager-daemonset.yaml

extraManifests []string

A list of urls that point to additional manifests. These will get automatically deployed as part of the bootstrap.

Examples:

extraManifests:
    - https://www.example.com/manifest1.yaml
    - https://www.example.com/manifest2.yaml

extraManifestHeaders map[string]string

A map of key value pairs that will be added while fetching the extraManifests.

Examples:

extraManifestHeaders:
    Token: "1234567"
    X-ExtraInfo: info

inlineManifests ClusterInlineManifests

A list of inline Kubernetes manifests. These will get automatically deployed as part of the bootstrap.

Examples:

inlineManifests:
    - name: namespace-ci # Name of the manifest.
      contents: |- # Manifest contents as a string.
        apiVersion: v1
        kind: Namespace
        metadata:
        	name: ci

adminKubeconfig AdminKubeconfigConfig

Settings for admin kubeconfig generation. Certificate lifetime can be configured.

Examples:

adminKubeconfig:
    certLifetime: 1h0m0s # Admin kubeconfig certificate lifetime (default is 1 year).

allowSchedulingOnMasters bool

Allows running workload on master nodes.

Valid values:

  • true

  • yes

  • false

  • no

ExtraMount

ExtraMount wraps OCI Mount specification.

Appears in:

- destination: /var/lib/example
  type: bind
  source: /var/lib/example
  options:
    - rshared
    - rw

KubeletConfig

KubeletConfig represents the kubelet config values.

Appears in:

image: ghcr.io/talos-systems/kubelet:v1.22.1 # The `image` field is an optional reference to an alternative kubelet image.
# The `extraArgs` field is used to provide additional flags to the kubelet.
extraArgs:
    feature-gates: ServerSideApply=true

# # The `ClusterDNS` field is an optional reference to an alternative kubelet clusterDNS ip list.
# clusterDNS:
#     - 10.96.0.10
#     - 169.254.2.53

# # The `extraMounts` field is used to add additional mounts to the kubelet container.
# extraMounts:
#     - destination: /var/lib/example
#       type: bind
#       source: /var/lib/example
#       options:
#         - rshared
#         - rw

image string

The image field is an optional reference to an alternative kubelet image.

Examples:

image: ghcr.io/talos-systems/kubelet:v1.22.1

clusterDNS []string

The ClusterDNS field is an optional reference to an alternative kubelet clusterDNS ip list.

Examples:

clusterDNS:
    - 10.96.0.10
    - 169.254.2.53

extraArgs map[string]string

The extraArgs field is used to provide additional flags to the kubelet.

Examples:

extraArgs:
    key: value

extraMounts []ExtraMount

The extraMounts field is used to add additional mounts to the kubelet container.

Examples:

extraMounts:
    - destination: /var/lib/example
      type: bind
      source: /var/lib/example
      options:
        - rshared
        - rw

registerWithFQDN bool

The registerWithFQDN field is used to force kubelet to use the node FQDN for registration. This is required in clouds like AWS.

Valid values:

  • true

  • yes

  • false

  • no

NetworkConfig

NetworkConfig represents the machine’s networking config values.

Appears in:

hostname: worker-1 # Used to statically set the hostname for the machine.
# `interfaces` is used to define the network interface configuration.
interfaces:
    - interface: eth0 # The interface name.
      # Assigns static IP addresses to the interface.
      addresses:
        - 192.168.2.0/24
      # A list of routes associated with the interface.
      routes:
        - network: 0.0.0.0/0 # The route's network.
          gateway: 192.168.2.1 # The route's gateway.
          metric: 1024 # The optional metric for the route.
      mtu: 1500 # The interface's MTU.

      # # Bond specific options.
      # bond:
      #     # The interfaces that make up the bond.
      #     interfaces:
      #         - eth0
      #         - eth1
      #     mode: 802.3ad # A bond option.
      #     lacpRate: fast # A bond option.

      # # Indicates if DHCP should be used to configure the interface.
      # dhcp: true

      # # DHCP specific options.
      # dhcpOptions:
      #     routeMetric: 1024 # The priority of all routes received via DHCP.

      # # Wireguard specific configuration.

      # # wireguard server example
      # wireguard:
      #     privateKey: ABCDEF... # Specifies a private key configuration (base64 encoded).
      #     listenPort: 51111 # Specifies a device's listening port.
      #     # Specifies a list of peer configurations to apply to a device.
      #     peers:
      #         - publicKey: ABCDEF... # Specifies the public key of this peer.
      #           endpoint: 192.168.1.3 # Specifies the endpoint of this peer entry.
      #           # AllowedIPs specifies a list of allowed IP addresses in CIDR notation for this peer.
      #           allowedIPs:
      #             - 192.168.1.0/24
      # # wireguard peer example
      # wireguard:
      #     privateKey: ABCDEF... # Specifies a private key configuration (base64 encoded).
      #     # Specifies a list of peer configurations to apply to a device.
      #     peers:
      #         - publicKey: ABCDEF... # Specifies the public key of this peer.
      #           endpoint: 192.168.1.2 # Specifies the endpoint of this peer entry.
      #           persistentKeepaliveInterval: 10s # Specifies the persistent keepalive interval for this peer.
      #           # AllowedIPs specifies a list of allowed IP addresses in CIDR notation for this peer.
      #           allowedIPs:
      #             - 192.168.1.0/24

      # # Virtual (shared) IP address configuration.
      # vip:
      #     ip: 172.16.199.55 # Specifies the IP address to be used.
# Used to statically set the nameservers for the machine.
nameservers:
    - 9.8.7.6
    - 8.7.6.5

# # Allows for extra entries to be added to the `/etc/hosts` file
# extraHostEntries:
#     - ip: 192.168.1.100 # The IP of the host.
#       # The host alias.
#       aliases:
#         - example
#         - example.domain.tld

hostname string

Used to statically set the hostname for the machine.

interfaces []Device

interfaces is used to define the network interface configuration. By default all network interfaces will attempt a DHCP discovery. This can be further tuned through this configuration parameter.

Examples:

interfaces:
    - interface: eth0 # The interface name.
      # Assigns static IP addresses to the interface.
      addresses:
        - 192.168.2.0/24
      # A list of routes associated with the interface.
      routes:
        - network: 0.0.0.0/0 # The route's network.
          gateway: 192.168.2.1 # The route's gateway.
          metric: 1024 # The optional metric for the route.
      mtu: 1500 # The interface's MTU.

      # # Bond specific options.
      # bond:
      #     # The interfaces that make up the bond.
      #     interfaces:
      #         - eth0
      #         - eth1
      #     mode: 802.3ad # A bond option.
      #     lacpRate: fast # A bond option.

      # # Indicates if DHCP should be used to configure the interface.
      # dhcp: true

      # # DHCP specific options.
      # dhcpOptions:
      #     routeMetric: 1024 # The priority of all routes received via DHCP.

      # # Wireguard specific configuration.

      # # wireguard server example
      # wireguard:
      #     privateKey: ABCDEF... # Specifies a private key configuration (base64 encoded).
      #     listenPort: 51111 # Specifies a device's listening port.
      #     # Specifies a list of peer configurations to apply to a device.
      #     peers:
      #         - publicKey: ABCDEF... # Specifies the public key of this peer.
      #           endpoint: 192.168.1.3 # Specifies the endpoint of this peer entry.
      #           # AllowedIPs specifies a list of allowed IP addresses in CIDR notation for this peer.
      #           allowedIPs:
      #             - 192.168.1.0/24
      # # wireguard peer example
      # wireguard:
      #     privateKey: ABCDEF... # Specifies a private key configuration (base64 encoded).
      #     # Specifies a list of peer configurations to apply to a device.
      #     peers:
      #         - publicKey: ABCDEF... # Specifies the public key of this peer.
      #           endpoint: 192.168.1.2 # Specifies the endpoint of this peer entry.
      #           persistentKeepaliveInterval: 10s # Specifies the persistent keepalive interval for this peer.
      #           # AllowedIPs specifies a list of allowed IP addresses in CIDR notation for this peer.
      #           allowedIPs:
      #             - 192.168.1.0/24

      # # Virtual (shared) IP address configuration.
      # vip:
      #     ip: 172.16.199.55 # Specifies the IP address to be used.

nameservers []string

Used to statically set the nameservers for the machine. Defaults to 1.1.1.1 and 8.8.8.8

Examples:

nameservers:
    - 8.8.8.8
    - 1.1.1.1

extraHostEntries []ExtraHost

Allows for extra entries to be added to the /etc/hosts file

Examples:

extraHostEntries:
    - ip: 192.168.1.100 # The IP of the host.
      # The host alias.
      aliases:
        - example
        - example.domain.tld

InstallConfig

InstallConfig represents the installation options for preparing a node.

Appears in:

disk: /dev/sda # The disk used for installations.
# Allows for supplying extra kernel args via the bootloader.
extraKernelArgs:
    - console=ttyS1
    - panic=10
image: ghcr.io/talos-systems/installer:latest # Allows for supplying the image used to perform the installation.
bootloader: true # Indicates if a bootloader should be installed.
wipe: false # Indicates if the installation disk should be wiped at installation time.

# # Look up disk using disk attributes like model, size, serial and others.
# diskSelector:
#     size: 4GB # Disk size.
#     model: WDC* # Disk model `/sys/block/<dev>/device/model`.

disk string

The disk used for installations.

Examples:

disk: /dev/sda

disk: /dev/nvme0

diskSelector InstallDiskSelector

Look up disk using disk attributes like model, size, serial and others. Always has priority over disk.

Examples:

diskSelector:
    size: 4GB # Disk size.
    model: WDC* # Disk model `/sys/block/<dev>/device/model`.

extraKernelArgs []string

Allows for supplying extra kernel args via the bootloader.

Examples:

extraKernelArgs:
    - talos.platform=metal
    - reboot=k

image string

Allows for supplying the image used to perform the installation. Image reference for each Talos release can be found on GitHub releases page.

Examples:

image: ghcr.io/talos-systems/installer:latest

bootloader bool

Indicates if a bootloader should be installed.

Valid values:

  • true

  • yes

  • false

  • no

wipe bool

Indicates if the installation disk should be wiped at installation time. Defaults to true.

Valid values:

  • true

  • yes

  • false

  • no

legacyBIOSSupport bool

Indicates if MBR partition should be marked as bootable (active). Should be enabled only for the systems with legacy BIOS that doesn’t support GPT partitioning scheme.

InstallDiskSelector

InstallDiskSelector represents a disk query parameters for the install disk lookup.

Appears in:

size: 4GB # Disk size.
model: WDC* # Disk model `/sys/block/<dev>/device/model`.

size InstallDiskSizeMatcher

Disk size.

Examples:

size: 4GB

size: '> 1TB'

size: <= 2TB

name string

Disk name /sys/block/<dev>/device/name.

model string

Disk model /sys/block/<dev>/device/model.

serial string

Disk serial number /sys/block/<dev>/serial.

modalias string

Disk modalias /sys/block/<dev>/device/modalias.

uuid string

Disk UUID /sys/block/<dev>/uuid.

wwid string

Disk WWID /sys/block/<dev>/wwid.

type InstallDiskType

Disk Type.

Valid values:

  • ssd

  • hdd

  • nvme

  • sd

TimeConfig

TimeConfig represents the options for configuring time on a machine.

Appears in:

disabled: false # Indicates if the time service is disabled for the machine.
# Specifies time (NTP) servers to use for setting the system time.
servers:
    - time.cloudflare.com

disabled bool

Indicates if the time service is disabled for the machine. Defaults to false.

servers []string

Specifies time (NTP) servers to use for setting the system time. Defaults to pool.ntp.org

This parameter only supports a single time server.

RegistriesConfig

RegistriesConfig represents the image pull options.

Appears in:

# Specifies mirror configuration for each registry.
mirrors:
    docker.io:
        # List of endpoints (URLs) for registry mirrors to use.
        endpoints:
            - https://registry.local
# Specifies TLS & auth configuration for HTTPS image registries.
config:
    registry.local:
        # The TLS configuration for the registry.
        tls:
            # Enable mutual TLS authentication with the registry.
            clientIdentity:
                crt: TFMwdExTMUNSVWRKVGlCRFJWSlVTVVpKUTBGVVJTMHRMUzB0Q2sxSlNVSklla05DTUhGLi4u
                key: TFMwdExTMUNSVWRKVGlCRlJESTFOVEU1SUZCU1NWWkJWRVVnUzBWWkxTMHRMUzBLVFVNLi4u
        # The auth configuration for this registry.
        auth:
            username: username # Optional registry authentication.
            password: password # Optional registry authentication.

mirrors map[string]RegistryMirrorConfig

Specifies mirror configuration for each registry. This setting allows to use local pull-through caching registires, air-gapped installations, etc.

Registry name is the first segment of image identifier, with ‘docker.io’ being default one. To catch any registry names not specified explicitly, use ‘*’.

Examples:

mirrors:
    ghcr.io:
        # List of endpoints (URLs) for registry mirrors to use.
        endpoints:
            - https://registry.insecure
            - https://ghcr.io/v2/

config map[string]RegistryConfig

Specifies TLS & auth configuration for HTTPS image registries. Mutual TLS can be enabled with ‘clientIdentity’ option.

TLS configuration can be skipped if registry has trusted server certificate.

Examples:

config:
    registry.insecure:
        # The TLS configuration for the registry.
        tls:
            insecureSkipVerify: true # Skip TLS server certificate verification (not recommended).

            # # Enable mutual TLS authentication with the registry.
            # clientIdentity:
            #     crt: TFMwdExTMUNSVWRKVGlCRFJWSlVTVVpKUTBGVVJTMHRMUzB0Q2sxSlNVSklla05DTUhGLi4u
            #     key: TFMwdExTMUNSVWRKVGlCRlJESTFOVEU1SUZCU1NWWkJWRVVnUzBWWkxTMHRMUzBLVFVNLi4u

        # # The auth configuration for this registry.
        # auth:
        #     username: username # Optional registry authentication.
        #     password: password # Optional registry authentication.

PodCheckpointer

PodCheckpointer represents the pod-checkpointer config values.

image string

The image field is an override to the default pod-checkpointer image.

CoreDNS

CoreDNS represents the CoreDNS config values.

Appears in:

image: docker.io/coredns/coredns:1.8.4 # The `image` field is an override to the default coredns image.

disabled bool

Disable coredns deployment on cluster bootstrap.

image string

The image field is an override to the default coredns image.

Endpoint

Endpoint represents the endpoint URL parsed out of the machine config.

Appears in:

https://1.2.3.4:6443

https://cluster1.internal:6443

ControlPlaneConfig

ControlPlaneConfig represents the control plane configuration options.

Appears in:

endpoint: https://1.2.3.4 # Endpoint is the canonical controlplane endpoint, which can be an IP address or a DNS hostname.
localAPIServerPort: 443 # The port that the API server listens on internally.

endpoint Endpoint

Endpoint is the canonical controlplane endpoint, which can be an IP address or a DNS hostname. It is single-valued, and may optionally include a port number.

Examples:

endpoint: https://1.2.3.4:6443

endpoint: https://cluster1.internal:6443

localAPIServerPort int

The port that the API server listens on internally. This may be different than the port portion listed in the endpoint field above. The default is 6443.

APIServerConfig

APIServerConfig represents the kube apiserver configuration options.

Appears in:

image: k8s.gcr.io/kube-apiserver:v1.22.1 # The container image used in the API server manifest.
# Extra arguments to supply to the API server.
extraArgs:
    feature-gates: ServerSideApply=true
    http2-max-streams-per-connection: "32"
# Extra certificate subject alternative names for the API server's certificate.
certSANs:
    - 1.2.3.4
    - 4.5.6.7

image string

The container image used in the API server manifest.

Examples:

image: k8s.gcr.io/kube-apiserver:v1.22.1

extraArgs map[string]string

Extra arguments to supply to the API server.

extraVolumes []VolumeMountConfig

Extra volumes to mount to the API server static pod.

certSANs []string

Extra certificate subject alternative names for the API server’s certificate.

disablePodSecurityPolicy bool

Disable PodSecurityPolicy in the API server and default manifests.

ControllerManagerConfig

ControllerManagerConfig represents the kube controller manager configuration options.

Appears in:

image: k8s.gcr.io/kube-controller-manager:v1.22.1 # The container image used in the controller manager manifest.
# Extra arguments to supply to the controller manager.
extraArgs:
    feature-gates: ServerSideApply=true

image string

The container image used in the controller manager manifest.

Examples:

image: k8s.gcr.io/kube-controller-manager:v1.22.1

extraArgs map[string]string

Extra arguments to supply to the controller manager.

extraVolumes []VolumeMountConfig

Extra volumes to mount to the controller manager static pod.

ProxyConfig

ProxyConfig represents the kube proxy configuration options.

Appears in:

image: k8s.gcr.io/kube-proxy:v1.22.1 # The container image used in the kube-proxy manifest.
mode: ipvs # proxy mode of kube-proxy.
# Extra arguments to supply to kube-proxy.
extraArgs:
    proxy-mode: iptables

disabled bool

Disable kube-proxy deployment on cluster bootstrap.

Examples:

disabled: false

image string

The container image used in the kube-proxy manifest.

Examples:

image: k8s.gcr.io/kube-proxy:v1.22.1

mode string

proxy mode of kube-proxy. The default is ‘iptables’.

extraArgs map[string]string

Extra arguments to supply to kube-proxy.

SchedulerConfig

SchedulerConfig represents the kube scheduler configuration options.

Appears in:

image: k8s.gcr.io/kube-scheduler:v1.22.1 # The container image used in the scheduler manifest.
# Extra arguments to supply to the scheduler.
extraArgs:
    feature-gates: AllBeta=true

image string

The container image used in the scheduler manifest.

Examples:

image: k8s.gcr.io/kube-scheduler:v1.22.1

extraArgs map[string]string

Extra arguments to supply to the scheduler.

extraVolumes []VolumeMountConfig

Extra volumes to mount to the scheduler static pod.

EtcdConfig

EtcdConfig represents the etcd configuration options.

Appears in:

image: gcr.io/etcd-development/etcd:v3.4.16 # The container image used to create the etcd service.
# The `ca` is the root certificate authority of the PKI.
ca:
    crt: TFMwdExTMUNSVWRKVGlCRFJWSlVTVVpKUTBGVVJTMHRMUzB0Q2sxSlNVSklla05DTUhGLi4u
    key: TFMwdExTMUNSVWRKVGlCRlJESTFOVEU1SUZCU1NWWkJWRVVnUzBWWkxTMHRMUzBLVFVNLi4u
# Extra arguments to supply to etcd.
extraArgs:
    election-timeout: "5000"

image string

The container image used to create the etcd service.

Examples:

image: gcr.io/etcd-development/etcd:v3.4.16

ca PEMEncodedCertificateAndKey

The ca is the root certificate authority of the PKI. It is composed of a base64 encoded crt and key.

Examples:

ca:
    crt: TFMwdExTMUNSVWRKVGlCRFJWSlVTVVpKUTBGVVJTMHRMUzB0Q2sxSlNVSklla05DTUhGLi4u
    key: TFMwdExTMUNSVWRKVGlCRlJESTFOVEU1SUZCU1NWWkJWRVVnUzBWWkxTMHRMUzBLVFVNLi4u

extraArgs map[string]string

Extra arguments to supply to etcd. Note that the following args are not allowed:

  • name
  • data-dir
  • initial-cluster-state
  • listen-peer-urls
  • listen-client-urls
  • cert-file
  • key-file
  • trusted-ca-file
  • peer-client-cert-auth
  • peer-cert-file
  • peer-trusted-ca-file
  • peer-key-file

ClusterNetworkConfig

ClusterNetworkConfig represents kube networking configuration options.

Appears in:

# The CNI used.
cni:
    name: flannel # Name of CNI to use.
dnsDomain: cluster.local # The domain used by Kubernetes DNS.
# The pod subnet CIDR.
podSubnets:
    - 10.244.0.0/16
# The service subnet CIDR.
serviceSubnets:
    - 10.96.0.0/12

cni CNIConfig

The CNI used. Composed of “name” and “urls”. The “name” key supports the following options: “flannel”, “custom”, and “none”. “flannel” uses Talos-managed Flannel CNI, and that’s the default option. “custom” uses custom manifests that should be provided in “urls”. “none” indicates that Talos will not manage any CNI installation.

Examples:

cni:
    name: custom # Name of CNI to use.
    # URLs containing manifests to apply for the CNI.
    urls:
        - https://raw.githubusercontent.com/cilium/cilium/v1.8/install/kubernetes/quick-install.yaml

dnsDomain string

The domain used by Kubernetes DNS. The default is cluster.local

Examples:

dnsDomain: cluser.local

podSubnets []string

The pod subnet CIDR.

Examples:

podSubnets:
    - 10.244.0.0/16

serviceSubnets []string

The service subnet CIDR.

Examples:

serviceSubnets:
    - 10.96.0.0/12

CNIConfig

CNIConfig represents the CNI configuration options.

Appears in:

name: custom # Name of CNI to use.
# URLs containing manifests to apply for the CNI.
urls:
    - https://raw.githubusercontent.com/cilium/cilium/v1.8/install/kubernetes/quick-install.yaml

name string

Name of CNI to use.

Valid values:

  • flannel

  • custom

  • none

urls []string

URLs containing manifests to apply for the CNI. Should be present for “custom”, must be empty for “flannel” and “none”.

ExternalCloudProviderConfig

ExternalCloudProviderConfig contains external cloud provider configuration.

Appears in:

enabled: true # Enable external cloud provider.
# A list of urls that point to additional manifests for an external cloud provider.
manifests:
    - https://raw.githubusercontent.com/kubernetes/cloud-provider-aws/v1.20.0-alpha.0/manifests/rbac.yaml
    - https://raw.githubusercontent.com/kubernetes/cloud-provider-aws/v1.20.0-alpha.0/manifests/aws-cloud-controller-manager-daemonset.yaml

enabled bool

Enable external cloud provider.

Valid values:

  • true

  • yes

  • false

  • no

manifests []string

A list of urls that point to additional manifests for an external cloud provider. These will get automatically deployed as part of the bootstrap.

Examples:

manifests:
    - https://raw.githubusercontent.com/kubernetes/cloud-provider-aws/v1.20.0-alpha.0/manifests/rbac.yaml
    - https://raw.githubusercontent.com/kubernetes/cloud-provider-aws/v1.20.0-alpha.0/manifests/aws-cloud-controller-manager-daemonset.yaml

AdminKubeconfigConfig

AdminKubeconfigConfig contains admin kubeconfig settings.

Appears in:

certLifetime: 1h0m0s # Admin kubeconfig certificate lifetime (default is 1 year).

certLifetime Duration

Admin kubeconfig certificate lifetime (default is 1 year). Field format accepts any Go time.Duration format (‘1h’ for one hour, ‘10m’ for ten minutes).

MachineDisk

MachineDisk represents the options available for partitioning, formatting, and mounting extra disks.

Appears in:

- device: /dev/sdb # The name of the disk to use.
  # A list of partitions to create on the disk.
  partitions:
    - mountpoint: /var/mnt/extra # Where to mount the partition.

      # # The size of partition: either bytes or human readable representation. If `size:` is omitted, the partition is sized to occupy the full disk.

      # # Human readable representation.
      # size: 100 MB
      # # Precise value in bytes.
      # size: 1073741824

device string

The name of the disk to use.

partitions []DiskPartition

A list of partitions to create on the disk.

DiskPartition

DiskPartition represents the options for a disk partition.

Appears in:

size DiskSize

The size of partition: either bytes or human readable representation. If size: is omitted, the partition is sized to occupy the full disk.

Examples:

size: 100 MB

size: 1073741824

mountpoint string

Where to mount the partition.

EncryptionConfig

EncryptionConfig represents partition encryption settings.

Appears in:

provider string

Encryption provider to use for the encryption.

Examples:

provider: luks2

keys []EncryptionKey

Defines the encryption keys generation and storage method.

cipher string

Cipher kind to use for the encryption. Depends on the encryption provider.

Valid values:

  • aes-xts-plain64

  • xchacha12,aes-adiantum-plain64

  • xchacha20,aes-adiantum-plain64

Examples:

cipher: aes-xts-plain64

keySize uint

Defines the encryption key length.

blockSize uint64

Defines the encryption sector size.

Examples:

blockSize: 4096

options []string

Additional –perf parameters for the LUKS2 encryption.

Valid values:

  • no_read_workqueue

  • no_write_workqueue

  • same_cpu_crypt

Examples:

options:
    - no_read_workqueue
    - no_write_workqueue

EncryptionKey

EncryptionKey represents configuration for disk encryption key.

Appears in:

static EncryptionKeyStatic

Key which value is stored in the configuration file.

nodeID EncryptionKeyNodeID

Deterministically generated key from the node UUID and PartitionLabel.

slot int

Key slot number for LUKS2 encryption.

EncryptionKeyStatic

EncryptionKeyStatic represents throw away key type.

Appears in:

passphrase string

Defines the static passphrase value.

EncryptionKeyNodeID

EncryptionKeyNodeID represents deterministically generated key from the node UUID and PartitionLabel.

Appears in:

MachineFile

MachineFile represents a file to write to disk.

Appears in:

- content: '...' # The contents of the file.
  permissions: 0o666 # The file's permissions in octal.
  path: /tmp/file.txt # The path of the file.
  op: append # The operation to use

content string

The contents of the file.

permissions FileMode

The file’s permissions in octal.

path string

The path of the file.

op string

The operation to use

Valid values:

  • create

  • append

  • overwrite

ExtraHost

ExtraHost represents a host entry in /etc/hosts.

Appears in:

- ip: 192.168.1.100 # The IP of the host.
  # The host alias.
  aliases:
    - example
    - example.domain.tld

ip string

The IP of the host.

aliases []string

The host alias.

Device

Device represents a network interface.

Appears in:

- interface: eth0 # The interface name.
  # Assigns static IP addresses to the interface.
  addresses:
    - 192.168.2.0/24
  # A list of routes associated with the interface.
  routes:
    - network: 0.0.0.0/0 # The route's network.
      gateway: 192.168.2.1 # The route's gateway.
      metric: 1024 # The optional metric for the route.
  mtu: 1500 # The interface's MTU.

  # # Bond specific options.
  # bond:
  #     # The interfaces that make up the bond.
  #     interfaces:
  #         - eth0
  #         - eth1
  #     mode: 802.3ad # A bond option.
  #     lacpRate: fast # A bond option.

  # # Indicates if DHCP should be used to configure the interface.
  # dhcp: true

  # # DHCP specific options.
  # dhcpOptions:
  #     routeMetric: 1024 # The priority of all routes received via DHCP.

  # # Wireguard specific configuration.

  # # wireguard server example
  # wireguard:
  #     privateKey: ABCDEF... # Specifies a private key configuration (base64 encoded).
  #     listenPort: 51111 # Specifies a device's listening port.
  #     # Specifies a list of peer configurations to apply to a device.
  #     peers:
  #         - publicKey: ABCDEF... # Specifies the public key of this peer.
  #           endpoint: 192.168.1.3 # Specifies the endpoint of this peer entry.
  #           # AllowedIPs specifies a list of allowed IP addresses in CIDR notation for this peer.
  #           allowedIPs:
  #             - 192.168.1.0/24
  # # wireguard peer example
  # wireguard:
  #     privateKey: ABCDEF... # Specifies a private key configuration (base64 encoded).
  #     # Specifies a list of peer configurations to apply to a device.
  #     peers:
  #         - publicKey: ABCDEF... # Specifies the public key of this peer.
  #           endpoint: 192.168.1.2 # Specifies the endpoint of this peer entry.
  #           persistentKeepaliveInterval: 10s # Specifies the persistent keepalive interval for this peer.
  #           # AllowedIPs specifies a list of allowed IP addresses in CIDR notation for this peer.
  #           allowedIPs:
  #             - 192.168.1.0/24

  # # Virtual (shared) IP address configuration.
  # vip:
  #     ip: 172.16.199.55 # Specifies the IP address to be used.

interface string

The interface name.

Examples:

interface: eth0

addresses []string

Assigns static IP addresses to the interface. An address can be specified either in proper CIDR notation or as a standalone address (netmask of all ones is assumed).

Examples:

addresses:
    - 10.5.0.0/16
    - 192.168.3.7

routes []Route

A list of routes associated with the interface. If used in combination with DHCP, these routes will be appended to routes returned by DHCP server.

Examples:

routes:
    - network: 0.0.0.0/0 # The route's network.
      gateway: 10.5.0.1 # The route's gateway.
    - network: 10.2.0.0/16 # The route's network.
      gateway: 10.2.0.1 # The route's gateway.

bond Bond

Bond specific options.

Examples:

bond:
    # The interfaces that make up the bond.
    interfaces:
        - eth0
        - eth1
    mode: 802.3ad # A bond option.
    lacpRate: fast # A bond option.

vlans []Vlan

VLAN specific options.

mtu int

The interface’s MTU. If used in combination with DHCP, this will override any MTU settings returned from DHCP server.

dhcp bool

Indicates if DHCP should be used to configure the interface. The following DHCP options are supported:

  • OptionClasslessStaticRoute
  • OptionDomainNameServer
  • OptionDNSDomainSearchList
  • OptionHostName

Examples:

dhcp: true

ignore bool

Indicates if the interface should be ignored (skips configuration).

dummy bool

Indicates if the interface is a dummy interface. dummy is used to specify that this interface should be a virtual-only, dummy interface.

dhcpOptions DHCPOptions

DHCP specific options. dhcp must be set to true for these to take effect.

Examples:

dhcpOptions:
    routeMetric: 1024 # The priority of all routes received via DHCP.

wireguard DeviceWireguardConfig

Wireguard specific configuration. Includes things like private key, listen port, peers.

Examples:

wireguard:
    privateKey: ABCDEF... # Specifies a private key configuration (base64 encoded).
    listenPort: 51111 # Specifies a device's listening port.
    # Specifies a list of peer configurations to apply to a device.
    peers:
        - publicKey: ABCDEF... # Specifies the public key of this peer.
          endpoint: 192.168.1.3 # Specifies the endpoint of this peer entry.
          # AllowedIPs specifies a list of allowed IP addresses in CIDR notation for this peer.
          allowedIPs:
            - 192.168.1.0/24

wireguard:
    privateKey: ABCDEF... # Specifies a private key configuration (base64 encoded).
    # Specifies a list of peer configurations to apply to a device.
    peers:
        - publicKey: ABCDEF... # Specifies the public key of this peer.
          endpoint: 192.168.1.2 # Specifies the endpoint of this peer entry.
          persistentKeepaliveInterval: 10s # Specifies the persistent keepalive interval for this peer.
          # AllowedIPs specifies a list of allowed IP addresses in CIDR notation for this peer.
          allowedIPs:
            - 192.168.1.0/24

vip DeviceVIPConfig

Virtual (shared) IP address configuration.

Examples:

vip:
    ip: 172.16.199.55 # Specifies the IP address to be used.

DHCPOptions

DHCPOptions contains options for configuring the DHCP settings for a given interface.

Appears in:

routeMetric: 1024 # The priority of all routes received via DHCP.

routeMetric uint32

The priority of all routes received via DHCP.

ipv4 bool

Enables DHCPv4 protocol for the interface (default is enabled).

ipv6 bool

Enables DHCPv6 protocol for the interface (default is disabled).

DeviceWireguardConfig

DeviceWireguardConfig contains settings for configuring Wireguard network interface.

Appears in:

privateKey: ABCDEF... # Specifies a private key configuration (base64 encoded).
listenPort: 51111 # Specifies a device's listening port.
# Specifies a list of peer configurations to apply to a device.
peers:
    - publicKey: ABCDEF... # Specifies the public key of this peer.
      endpoint: 192.168.1.3 # Specifies the endpoint of this peer entry.
      # AllowedIPs specifies a list of allowed IP addresses in CIDR notation for this peer.
      allowedIPs:
        - 192.168.1.0/24

privateKey: ABCDEF... # Specifies a private key configuration (base64 encoded).
# Specifies a list of peer configurations to apply to a device.
peers:
    - publicKey: ABCDEF... # Specifies the public key of this peer.
      endpoint: 192.168.1.2 # Specifies the endpoint of this peer entry.
      persistentKeepaliveInterval: 10s # Specifies the persistent keepalive interval for this peer.
      # AllowedIPs specifies a list of allowed IP addresses in CIDR notation for this peer.
      allowedIPs:
        - 192.168.1.0/24

privateKey string

Specifies a private key configuration (base64 encoded). Can be generated by wg genkey.

listenPort int

Specifies a device’s listening port.

firewallMark int

Specifies a device’s firewall mark.

peers []DeviceWireguardPeer

Specifies a list of peer configurations to apply to a device.

DeviceWireguardPeer

DeviceWireguardPeer a WireGuard device peer configuration.

Appears in:

publicKey string

Specifies the public key of this peer. Can be extracted from private key by running wg pubkey < private.key > public.key && cat public.key.

endpoint string

Specifies the endpoint of this peer entry.

persistentKeepaliveInterval Duration

Specifies the persistent keepalive interval for this peer. Field format accepts any Go time.Duration format (‘1h’ for one hour, ‘10m’ for ten minutes).

allowedIPs []string

AllowedIPs specifies a list of allowed IP addresses in CIDR notation for this peer.

DeviceVIPConfig

DeviceVIPConfig contains settings for configuring a Virtual Shared IP on an interface.

Appears in:

ip: 172.16.199.55 # Specifies the IP address to be used.

ip string

Specifies the IP address to be used.

equinixMetal VIPEquinixMetalConfig

Specifies the Equinix Metal API settings to assign VIP to the node.

VIPEquinixMetalConfig

VIPEquinixMetalConfig contains settings for Equinix Metal VIP management.

Appears in:

apiToken string

Specifies the Equinix Metal API Token.

Bond

Bond contains the various options for configuring a bonded interface.

Appears in:

# The interfaces that make up the bond.
interfaces:
    - eth0
    - eth1
mode: 802.3ad # A bond option.
lacpRate: fast # A bond option.

interfaces []string

The interfaces that make up the bond.

arpIPTarget []string

A bond option. Please see the official kernel documentation. Not supported at the moment.

mode string

A bond option. Please see the official kernel documentation.

xmitHashPolicy string

A bond option. Please see the official kernel documentation.

lacpRate string

A bond option. Please see the official kernel documentation.

adActorSystem string

A bond option. Please see the official kernel documentation. Not supported at the moment.

arpValidate string

A bond option. Please see the official kernel documentation.

arpAllTargets string

A bond option. Please see the official kernel documentation.

primary string

A bond option. Please see the official kernel documentation.

primaryReselect string

A bond option. Please see the official kernel documentation.

failOverMac string

A bond option. Please see the official kernel documentation.

adSelect string

A bond option. Please see the official kernel documentation.

miimon uint32

A bond option. Please see the official kernel documentation.

updelay uint32

A bond option. Please see the official kernel documentation.

downdelay uint32

A bond option. Please see the official kernel documentation.

arpInterval uint32

A bond option. Please see the official kernel documentation.

resendIgmp uint32

A bond option. Please see the official kernel documentation.

minLinks uint32

A bond option. Please see the official kernel documentation.

lpInterval uint32

A bond option. Please see the official kernel documentation.

packetsPerSlave uint32

A bond option. Please see the official kernel documentation.

numPeerNotif uint8

A bond option. Please see the official kernel documentation.

tlbDynamicLb uint8

A bond option. Please see the official kernel documentation.

allSlavesActive uint8

A bond option. Please see the official kernel documentation.

useCarrier bool

A bond option. Please see the official kernel documentation.

adActorSysPrio uint16

A bond option. Please see the official kernel documentation.

adUserPortKey uint16

A bond option. Please see the official kernel documentation.

peerNotifyDelay uint32

A bond option. Please see the official kernel documentation.

Vlan

Vlan represents vlan settings for a device.

Appears in:

addresses []string

The addresses in CIDR notation or as plain IPs to use.

routes []Route

A list of routes associated with the VLAN.

dhcp bool

Indicates if DHCP should be used.

vlanId uint16

The VLAN’s ID.

Route

Route represents a network route.

Appears in:

- network: 0.0.0.0/0 # The route's network.
  gateway: 10.5.0.1 # The route's gateway.
- network: 10.2.0.0/16 # The route's network.
  gateway: 10.2.0.1 # The route's gateway.

network string

The route’s network.

gateway string

The route’s gateway.

source string

The route’s source address (optional).

metric uint32

The optional metric for the route.

RegistryMirrorConfig

RegistryMirrorConfig represents mirror configuration for a registry.

Appears in:

ghcr.io:
    # List of endpoints (URLs) for registry mirrors to use.
    endpoints:
        - https://registry.insecure
        - https://ghcr.io/v2/

endpoints []string

List of endpoints (URLs) for registry mirrors to use. Endpoint configures HTTP/HTTPS access mode, host name, port and path (if path is not set, it defaults to /v2).

RegistryConfig

RegistryConfig specifies auth & TLS config per registry.

Appears in:

registry.insecure:
    # The TLS configuration for the registry.
    tls:
        insecureSkipVerify: true # Skip TLS server certificate verification (not recommended).

        # # Enable mutual TLS authentication with the registry.
        # clientIdentity:
        #     crt: TFMwdExTMUNSVWRKVGlCRFJWSlVTVVpKUTBGVVJTMHRMUzB0Q2sxSlNVSklla05DTUhGLi4u
        #     key: TFMwdExTMUNSVWRKVGlCRlJESTFOVEU1SUZCU1NWWkJWRVVnUzBWWkxTMHRMUzBLVFVNLi4u

    # # The auth configuration for this registry.
    # auth:
    #     username: username # Optional registry authentication.
    #     password: password # Optional registry authentication.

tls RegistryTLSConfig

The TLS configuration for the registry.

Examples:

tls:
    # Enable mutual TLS authentication with the registry.
    clientIdentity:
        crt: TFMwdExTMUNSVWRKVGlCRFJWSlVTVVpKUTBGVVJTMHRMUzB0Q2sxSlNVSklla05DTUhGLi4u
        key: TFMwdExTMUNSVWRKVGlCRlJESTFOVEU1SUZCU1NWWkJWRVVnUzBWWkxTMHRMUzBLVFVNLi4u

tls:
    insecureSkipVerify: true # Skip TLS server certificate verification (not recommended).

    # # Enable mutual TLS authentication with the registry.
    # clientIdentity:
    #     crt: TFMwdExTMUNSVWRKVGlCRFJWSlVTVVpKUTBGVVJTMHRMUzB0Q2sxSlNVSklla05DTUhGLi4u
    #     key: TFMwdExTMUNSVWRKVGlCRlJESTFOVEU1SUZCU1NWWkJWRVVnUzBWWkxTMHRMUzBLVFVNLi4u

auth RegistryAuthConfig

The auth configuration for this registry.

Examples:

auth:
    username: username # Optional registry authentication.
    password: password # Optional registry authentication.

RegistryAuthConfig

RegistryAuthConfig specifies authentication configuration for a registry.

Appears in:

username: username # Optional registry authentication.
password: password # Optional registry authentication.

username string

Optional registry authentication. The meaning of each field is the same with the corresponding field in .docker/config.json.

password string

Optional registry authentication. The meaning of each field is the same with the corresponding field in .docker/config.json.

auth string

Optional registry authentication. The meaning of each field is the same with the corresponding field in .docker/config.json.

identityToken string

Optional registry authentication. The meaning of each field is the same with the corresponding field in .docker/config.json.

RegistryTLSConfig

RegistryTLSConfig specifies TLS config for HTTPS registries.

Appears in:

# Enable mutual TLS authentication with the registry.
clientIdentity:
    crt: TFMwdExTMUNSVWRKVGlCRFJWSlVTVVpKUTBGVVJTMHRMUzB0Q2sxSlNVSklla05DTUhGLi4u
    key: TFMwdExTMUNSVWRKVGlCRlJESTFOVEU1SUZCU1NWWkJWRVVnUzBWWkxTMHRMUzBLVFVNLi4u

insecureSkipVerify: true # Skip TLS server certificate verification (not recommended).

# # Enable mutual TLS authentication with the registry.
# clientIdentity:
#     crt: TFMwdExTMUNSVWRKVGlCRFJWSlVTVVpKUTBGVVJTMHRMUzB0Q2sxSlNVSklla05DTUhGLi4u
#     key: TFMwdExTMUNSVWRKVGlCRlJESTFOVEU1SUZCU1NWWkJWRVVnUzBWWkxTMHRMUzBLVFVNLi4u

clientIdentity PEMEncodedCertificateAndKey

Enable mutual TLS authentication with the registry. Client certificate and key should be base64-encoded.

Examples:

clientIdentity:
    crt: TFMwdExTMUNSVWRKVGlCRFJWSlVTVVpKUTBGVVJTMHRMUzB0Q2sxSlNVSklla05DTUhGLi4u
    key: TFMwdExTMUNSVWRKVGlCRlJESTFOVEU1SUZCU1NWWkJWRVVnUzBWWkxTMHRMUzBLVFVNLi4u

ca Base64Bytes

CA registry certificate to add the list of trusted certificates. Certificate should be base64-encoded.

insecureSkipVerify bool

Skip TLS server certificate verification (not recommended).

SystemDiskEncryptionConfig

SystemDiskEncryptionConfig specifies system disk partitions encryption settings.

Appears in:

# Ephemeral partition encryption.
ephemeral:
    provider: luks2 # Encryption provider to use for the encryption.
    # Defines the encryption keys generation and storage method.
    keys:
        - # Deterministically generated key from the node UUID and PartitionLabel.
          nodeID: {}
          slot: 0 # Key slot number for LUKS2 encryption.

    # # Cipher kind to use for the encryption. Depends on the encryption provider.
    # cipher: aes-xts-plain64

    # # Defines the encryption sector size.
    # blockSize: 4096

    # # Additional --perf parameters for the LUKS2 encryption.
    # options:
    #     - no_read_workqueue
    #     - no_write_workqueue

state EncryptionConfig

State partition encryption.

ephemeral EncryptionConfig

Ephemeral partition encryption.

FeaturesConfig

FeaturesConfig describe individual Talos features that can be switched on or off.

Appears in:

rbac: true # Enable role-based access control (RBAC).

rbac bool

Enable role-based access control (RBAC).

VolumeMountConfig

VolumeMountConfig struct describes extra volume mount for the static pods.

Appears in:

hostPath string

Path on the host.

Examples:

hostPath: /var/lib/auth

mountPath string

Path in the container.

Examples:

mountPath: /etc/kubernetes/auth

readonly bool

Mount the volume read only.

Examples:

readonly: true

ClusterInlineManifest

ClusterInlineManifest struct describes inline bootstrap manifests for the user.

name string

Name of the manifest. Name should be unique.

Examples:

name: csi

contents string

Manifest contents as a string.

Examples:

contents: /etc/kubernetes/auth
Last modified March 18, 2022: docs: overhaul all the docs (e3fda049f)